• Description





Especially well suited for motor powered and glider aircraft models, helicopters, boat models, and RC cars.
  • High-voltage, operating voltage up to 8.4V!
  • Direct operation with 2-cell LiPo batteries
  • Operating voltage range 4.8 ... 8.4 V
  • Ball bearings
  • Metal drive mechanism

Warning - Potential problems with this servo!

This servo features metal gears, and the potentiometer operating voltage is passed to the servo’s metal output shaft. If an aluminium control surface horn or a non-insulated RDS linkage is used with the servo, and if an electrically conductive contact with the airframe also exists - e.g. in an all-carbon model - the servos will interact with each, as the aforesaid voltage is transmitted between them. You can avoid this problem either by using a plastic control surface horn, or by insulating the servo mount in such a way that no electrical connection exists.

As manufacturer, Graupner/SJ GmbH recommends the exclusive use of accessories which have been tested and approved by Graupner/SJ, as this ensures that they are fit for purpose, work correctly and are safe. If you observe this advice, Graupner/SJ accepts liability to you for the product. Graupner/SJ is not in a position to assess the safety risk of every individual product made by other companies. For this reason we deny all liability If you use non-approved components, or accessories made by other manufacturers.

Graupner servos represent a product line which provides the right servo for almost every application with a wide range of specifications. Different sizes, gear designs, actuating forces and actuating times designed for the beginner to the competition pilot.

- C Series: proven analogue servos from JR, proven a thousand times over
- DS series: digital servos from JR, extremely precise neutral position and smooth control characteristics due to 13 bit ACD system with 5,900 steps
- DES series: low-cost digital servos, for universal applications in model making with high-quality Atmel microcontroller
- HVS series; High-Voltage servos for direct connection to 2-cell Lipo batteries
- HBS series: High-Voltage - Brushless servos for direct connection to 2-cell lipo batteries, with incomparable acceleration behaviour
- HVC / HCM series: High-Voltage - Corless Servos for direct connection to 2-cell Lipo batteries, highest production quality, some with metal housing (HCM)

Technical data

Bearing ••
Gearbox Type Metal
Torque(7,4V) 6,3 kg
Speed(40°) 0,09
Weight (g) 23 g
Length (mm) 30
Width (mm) 13
Height (mm) 33
Servo type High Voltage
Gear tooth
Graupner, based in Kirchheim, Germany, was founded by the family Graupner and, up until March 2013, operated under the third Graupner generation from Stefan Graupner. In March 2013, the company was purchased by the manufacturer of Graupner HoTT RC Transmitter Systems. Graupner covers a large RC assortment including RC Cars and Trucks (GM), Helicopters, Airplanes, RC Electronics (HoTT 2,4GHZ), Chargers, RC Glow-Powered Motors (OS) as well as a large variety of Electric-Powered Brushless Motors. Graupner supplies around 2000 retailers throughout the world.


Often bought together

Notification for this product