• Description

Description

Hints!

Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, France, Italy, Belgium, Bulgaria, Denmark, Great Britain, Croatia, Luxembourg, Netherlands, Poland, Romania, Sweden, Slovakia, Slovenia, Czech Republic, HungaryPlease note that shipping this item to Finland is not possible!

Technical data

KDSV-10 is a castable, condensation-curing 2-component silicone rubber with low viscosity.

Very soft, for models with severe undercuts.

Excellent flowability
Simple processing
Very good tear and tear resistance
Technical data:

Standard:

Mixing ratio: 100 : 2 parts by weight Component A : Component B
Processing time: 140 minutes
Demoldable after: 10-12 h

Variants:

Mixing ratios from 100 : 2 to 100 : 5

Processing time (100 g in a beaker at 23 °C):
100 : 2 = approx. 140 minutes
100 : 3 = approx. 70 minutes
100 : 4 = approx. 40 minutes
100 : 5 = approx. 20 minutes

Demouldable after: approx. 60 minutes to 12 hours, depending on crosslinker quantity

Colour: White
Mixed viscosity: 8.000-10.000 mPa-s
Density: 1.08 g/cm³
Hardness Shore A: 10
Tensile strength: ? 4.5 N/mm²
Elongation at break: ? 500 %.
Tear resistance: ? 18 N/mm

No reaction heat is generated during vulcanization, so that even larger quantities (e.g. 10 kg) can be poured without the risk of overheating.

Comments

Often bought together

Notification for this product