Filter
–
Robbe Modellsport stabilizer condensator 10V 4700uF
€5.99*
Product no.:
9790471
Manufacturer no.:
46328
This capacitor effectively prevents voltage drops in the servo power supply of particularly powerful servos. Even current peaks can be absorbed by this capacitor. It is simply plugged into a free receiver channel. 46328
Robbe Modellsport stabilizer condensator 16V 6800uF
€5.99*
Product no.:
9790463
Manufacturer no.:
46323
This capacitor effectively prevents voltage drops in the servo power supply of particularly powerful servos. Even current peaks can be absorbed by this capacitor. It is simply plugged into a free receiver channel. 46323
Robbe Modellsport RO-CONTROL PRO WIFI MODUL
€39.99*
Product no.:
9767458
Manufacturer no.:
8734
Features:Simple programming of a RO CONTROL PRO WIFI controllerSupports programming and recognition of real-time data at close range via the ROBBE smartphone appSmall, easy to transport and assembleSpecifications:Operating voltage: DC 5 to 26 VPower consumption: ? 300 mWSize: ? 27. 5 x 9mmWeight: 9,2 gWiFi range: 0 to 20 m (open field)WiFi protocol: IEEE802.11 b/n/g Download the free app for your Android phone here:Android_AppDownload the free app for your iOS phone here:iOS_App 8734
Robbe Modellsport RO-CONTROL PRO PROGCARD
€14.99*
Product no.:
9744757
Manufacturer no.:
8720
With this LED programming box you have a powerful tool to program your ROCONTROL PRO controllers comfortably. Operating voltage: 4.8-8.4 V; Dimensions: 88/58/14 mm; Weight: 40 g. 8720
Robbe Modellsport RO-CONTROL PROGRAMMING CARD (NOT SUITABLE FOR "PRO" SERIES)
€14.99*
Product no.:
9744754
Manufacturer no.:
8719
This programming box is used to program ROBBE rocontrol brushless ESC'S. It is easy to control and has a user-friendly interface.Technical Data:Dimensions: 92 x 52 x 6mmWeight: 26gInput Voltage: 4,8 - 6 Volt (if the ESC doesn't have a BEC, then an external power source is required). 8719
Programmier Box für Torro Fahrtenregler
€30.99*
Product no.:
9793942
Manufacturer no.:
SK300079-01
SK300079-01
Pichler PROGRAMMING BOX S-CON
€29.99*
Product no.:
9720450
Manufacturer no.:
C6836
The S-CON programming box has the following basic functions:1. setting the S-CON controller functions2. reading out the flight data (data logging)3. use as USB adapter to connect the controller to the PC4. firmware update (if available) C6836
DUALSKY Halterung für SUMMIT 100HV & 120HV Regler mit Schrauben
€6.99*
Product no.:
9791557
Manufacturer no.:
42097
42097
HEPF Temperatursensor ID für Ibex Controller
€24.80*
Product no.:
9790528
Manufacturer no.:
HT125ID
Temperatursensor für IBEX Brushless Controllerprogrammierbarer Temperatursensor für IBEX Controller.Temperaturbereich -10 bis +125°CAnwendung 1HT125ID ist ein kleiner Temperatursensor, der mehrere Telemetrieprotokolle unterstützt.Er kann zur Temperaturmessung des Elektromotors, der Batterien oder anderer Komponenten Ihres Modells verwendet werden.Merkmale:Kleine Abmessungender Sensor wird direkt an den Telemetrieanschluss des Empfängers angeschlossenTemperatur-Min/Max-Werte werden aufgezeichnetAutomatische Telemetrie-Erkennung: Duplex EX, Hott, MSB, S.Bus2Konfigurierbare Alarme bei hoher TemperaturKonfiguration über den SenderFirmware-Updates.Konfigurierbare Telemetrie-Slots im S.Bus2-Telemetriemodus.Verwenden Sie zum Ändern die Software MAV Manager.Wählen Sie nach dem Ändern des Slots den Sensortyp „T125“ denentsprechenden Slot in Ihrem Futaba-SenderAnwendung 2Der Temperatursensor HT 125ID ist kompatibel mit der IBEX Controller ReiheDer Sensor wird direkt an den Eingang „A“ des IBEX Controllers angeschlossen. (siehe Bild oben). Von diesem Moment an kennt der IBEX-Steller die grundlegenden Motorparameter (Mindestbeschleunigung, empfohlenes Timing, Übersetzungsverhältnis, Polzahl…) und die Motortemperatur. Einige Parameter werden automatisch angepasst (Getriebeverhältnis, Pole), die anderen Einstellungen werden nach dem Zurücksetzen des Stellers auf Werkseinstellungen konfiguriert.Einige Motormarken (z.B. Hemotec) haben diesen Temperatursensor HT125ID eingebaut. diese Übergeben an den IBEX Controller die wichtigsten Parameter, und schützen so - auch mit der Temperaturüberwachung - den Antriebstrang vor Überlast oder Zerstörung.Die Programmierung des HT125ID erfolgt über eine Jeti Box, Smart Box oder über die Jetibox Emulation. HT125ID
HEPF Hallsensor für Ibex Controller
€19.90*
Product no.:
9790527
Manufacturer no.:
IBEXHALL
Hallsensor für Propeller Positionierung mit IBEX Brushless ControllernDie Positionierungsfunktion ermöglicht es, den Motor/Propeller genau in die Position zu bringen, die für eine sichere Landung erforderlich ist oder die für das Weiterfliegen einfach bequem ist.Mit nur wenigen externen Komponenten (Hall-Sensor und einem kleinen Magneten) können Sie diese Funktion aktivieren und verhindern, dass Ihr Propeller während der Landung beschädigt wird. Der Magnet muss richtig am rotierenden Teil (entweder Motor oder Propeller) befestigt werden und der Hall-Sensor muss sich im Rumpf oder Motorhaube befinden, damit der Magnet an der Zielpropeller-Position mit dem Hall-Sensor übereinstimmt. Nachdem Sie die Positionierungsfunktion im Menü aktiviert haben, stellen Sie auch die Positionierungs-PWM ein, damit der Motor langsam aber gleichmäßig dreht.Der Hallsensor eignet sich hervorragend als Positionssensor z.B. für Fahrwerke, Klapptriebwerke u.Ä.Bei Jeti Duplex Empfängern kann ein Servosteckplatz auf "digital Input" gestellt werden, und so die Sensordaten auf den Sender übertragen werden. IBEXHALL
HEPF USB Interface
€14.90*
Product no.:
9790525
Manufacturer no.:
HEUSB
Einfache Geräte-Updates über die MAV-Manager-SoftwareHerunterladen von Daten von SensorenOnline-Telemetrieansicht auf dem PC HEUSB
HOBBYWING LCD programming box G2 for Xerun, Ezrun and Platinum controller
€33.99*
Product no.:
9784541
Manufacturer no.:
HW30502001
The improved LCD programming box from Hobbywing is the ideal addition for programming brushless controllers easily and conveniently, whether on the road or at home on the computer. The set values are shown on the 16x2 field LCD display, so you always know what you are setting. With the included USB-C adapter, the box can also serve as a connection between the controller and the computer, for example to update the firmware.If you need even more functionality, you can also use the programming box to measure the voltage of individual LiPo cells or entire packs. So three excellent functions in one handy device.Note: Please refer to the programming settings of your controller to find out which values can be set.Technical data:- Input voltage DC: 4.5-12.6V- (If the ESC does not have a built-in BEC, a separate battery must be used) - Display: 16x2 characters LCD- Connections: USB-C, controller, power supply- Compatibility for LiPo measurement: XH, EH, HP/PQ- Dimensions: 90x51x17mm- Weight: 65gThis multifunction LCD Program Box is suitable for the following controllers:- XeRun auto-regulators: version 2.0, 2.1, 3.0, 3.1 and newer- EZRUN autos: version 2.0 and newer- PLATINUM helicopter/flight controller- Seaking Pro boat controller HW30502001
HOBBYWING AXE Sensor cable extension 300mm
€27.99*
Product no.:
9780709
Manufacturer no.:
HW30850307
This sensor extension cable is the ideal support if the existing sensor cable between motor and controller of AXE R2 Power System Combos is not long enough. Thanks to the new plug connection, they also take up less space than their predecessor and are extremely waterproof. Length: 300mm. HW30850307
HOBBYWING OTA WiFi Programmier Modul
€63.99*
Product no.:
9779908
Manufacturer no.:
HW30850400
Product information "Hobbywing OTA WIFI Programming Module".Thanks to the OTA programming module, Hobbywing controllers can be programmed in a modern and intuitive way. Via the transmitted Bluetooth signal of the module, the controller is wirelessly connected to a smartphone. In the "HW Link" app from Hobbywing, all parameters can then be selected and set as usual.The OTA programming module is also smaller and lighter than a usual programming box and thus fits comfortably in any pocket. So it's perfect for on the go.FeaturesSimple operationCompact designReal-time data recording (compatible controller required)Firmware update directly via the "HW Link" appIncluding reset button on the bottom of the moduleSuitable for the following HobbyWing productsselected XERUN and EZRUN controllers for RC carsselected PLATINUM controllers for RC aircraftselected SEAKING controllers for RC boatsTechnical dataDimension: 30x25,5x8,5mmweight: 10,2ginput voltage: 5-12,6VRange: 0-3mSupported Bluetooth version: HW30850400
SPEKTRUM AVIAN AND COMPANY SMART ESCS PROGRAMMING UPDATE BOX
€31.99*
Product no.:
9774741
Manufacturer no.:
SPMXCA200
SPMXCA200
ROBITRONIC LED PROGRAMMING BOX RAZER TEN & EIGHT
€14.99*
Product no.:
9763263
Manufacturer no.:
R01269
This LED program box is for programming Robitronic Razer ten & eight ESCs. Its friendly interface makes ESC programming easy and quick. Its compact, portable and very applicable for field use. R01269
ABSIMA PROGRAM BOX FOR THRUST BL ECO 1/8 AND 01.OKT
€19.95*
Product no.:
9749113
Manufacturer no.:
2110041
2110041
HOBBYWING PROGRAM BOX LED UNIVERSAL XERUN, EZRUN, SEAKING PLATINUM
€13.99*
Product no.:
9740318
Manufacturer no.:
HW30501003
This LED program box is suitable for programming HobbyWing brushless controllers. Programming the controllers is quick and easy with this LED program box. Small enough to keep them always ready for use.suitable for the following HobbyWing products - Platinum V1/V2 Series and FlyFun V5 Series Brushless Controllers - XeRun series (most), EzRun and QuicRun series of brushless car controllers - SeaKing Series of Brushless-Boots ControllersTechnical Data Note: If the controller does not have a BEC, an external BEC or battery is required for operation.Dimension: 88x58x14mmWeight: 40gInput voltage: 4.8V -8.4V HW30501003
HOBBYWING RPM SENSOR FOR HV ESC
€8.99*
Product no.:
9719387
Manufacturer no.:
HW86060041
RPM sensor for High Voltage Hobbywing ESC. It detects the voltage changes in the wires of the brushless motor and then sends the RPM sensor. HW86060041
HOBBYWING FAN WP3510SH 10500 RPM 5V
€10.99*
Product no.:
9719386
Manufacturer no.:
HW30860200
HW30860200
HOBBYWING FAN 2510SH 14000 RPM 5V
€10.99*
Product no.:
9719383
Manufacturer no.:
HW86080050
HW86080050
HOBBYWING PROGRAMMING CARD FOR FLYFUN AND SKYWALKER CONTROLS
€13.99*
Product no.:
9712869
Manufacturer no.:
HW86020041
Compatible with Hobbywing Regulator Series "Skywalker".This programming box is suitable for programming the Hobbywing Brushless controllers. It has a user-friendly interface and is easy to use.Suitable for:FlyFun (also called Fentium) Brushless controller for airplanesSkyWalker Brushless Controllers for AirplanesTechnical data:Dimensions: 92 x 52 x 6mmWeight: 26gInput voltage: 4.8 - 6 volts (if the controller has no BEC, an external power supply is required) HW86020041
USB INTERFACE V2 F. ESC X-PRO HACKER
€18.89*
Product no.:
89160
Manufacturer no.:
87201006
-Pro USB interface V2 suitable for the X-Pro controller series incl. Windows SW from Win XP to Win7 64bit. 87201006
DUALSKY PROGCARD BL ESC
€12.99*
Product no.:
71239
Manufacturer no.:
45200
Mit dieser Programmierkarte können Sie alle unsere Dualsky Regler in ihren Einzelfunktionen verändern. 45200
JETI BOX PROGRAMMER AND DISPLAY UNIT
€39.90*
Product no.:
62347
Manufacturer no.:
11006000
JETIBOX is a universal communication terminal, which can be used with any JETI products that are marked JETIBOX Compatible. JETIBOX Compatible products use powerful software to allow easy setup and reading of data using a simple menu driven display on the JETIBOX terminal.There are now a number of JETI model JBC products for use with the JETIBOX, which due to its features and simplicity is gaining a large number of supporters around the world, and this support in turn is creating demand for an even greater range of JETI model JBC products.JETIBOX operates as a two–way terminal, showing all data stored in the JBC product. With the use of four buttons, the user can browse the menu and set the selected values to take advantage of the full capability of JBC products.It is currently possible with the use of the JETIBOX to program controllers in the Master/Jeti SPIN series; the Master Basic series; REX JBC receivers, and the new transmitter modules, receivers and all accessories in the DUPLEX system. With the JETIBOX connected to DUPLEX transmitter modules, it is possible to have continuous wireless communication with any JETIBOX compatible device in the model.The JETIBOX may be used on its own for:Measuring the pulse width from the receiver – displaying the pulse width in milliseconds along with the receiver voltagePulse generation – this feature is useful for initial servo setup in the model, without the need to use transmitters and receiversServo cycling – this can be used to check the operation and reliability of servosServo speed measurement – the time taken for the servo to move from one position to another. 11006000
HACKER Support capacitor Addcap 820
€20.90*
Product no.:
9778601
Manufacturer no.:
22985482
Capacitor to improve the power supply for low impedance drive systems.The backup capacitor should also be used if the cables between battery and controller are extended by more than approx. 20cm. Use one backup capacitor Addcap 820 per 20cm extension.Suitable for use on cables with 2.5 to 6 mm² cross-section (AWG14 to AWG10). 22985482