Filter
–
–
–
–
–
–
–
ABSIMA HV 3S/4S Digital Alu Servo ST62DBFT Crawler-Spec. Waterproof
€89.95*
Product no.:
9797152
Manufacturer no.:
2030109
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions. Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle. TECHNICAL DATA HIGHLIGHTS:Servo Category: High-Torque & High SpeedOperating Voltage: 7.4 - 16.8V HVTorque / Speed @ 12V: 48.0kg / 0.120sec/60°Torque / Speed @ 14.4V: 54.0kg / 0.100sec/60°Torque / Speed @ 16V: 60.0kg / 0.095sec/60°Torque / Speed @ 16.8V: 62.0kg / 0.090sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP67 water-proofBearing: Metal ball bearings (2)Servo Arms: 1* Aluminum, 2* PlasticSize: 40*20*41.5 mm (Standard)Weight: 88,2 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately)ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary! 2030109
-22%
New
Futaba BLS-A600 Brushless Mini Servo 13mm
€139.99*
€179.99*
(22.22% saved)
Product no.:
9801622
Manufacturer no.:
FPBLS-A600
Futaba BLS-A600 - Brushless Mini Servo HVSmall brushless servo for airplanes.Metal 1-4 gearsMetal final gearS.BUSReplaces BLS173SVSpecs:Speed: 0.09s/60° (7.4V) / 0.10s/60° (6.6V)Torque: 6.7kg/cm (7.4V) / 6kg/cm (6.6V)Size: 27.2x13x30.5mmWeight: 28g FPBLS-A600
CHASERVO HV7010 70kg HV 20mm Brushless MG Servo Hall Sensor
€169.99*
Product no.:
9800813
Manufacturer no.:
HV7010
HV7010
-19%
FUTABA HPS-A704 S.Bus2 High-Voltage Standard Airplane Servo
€189.99*
€233.99*
(18.8% saved)
Product no.:
9799056
Manufacturer no.:
FPHPS-A704
FEATURES:– For F3A airplanes.– Programmable/High performance Brushless Servo.– Custom New high speed Brushless Motor.– Designed with F3A in mind– Programmable and compatible with S.Bus and S.Bus2 systems.– Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.– Final gear material is metal.– Upper/middle/bottom: Plastic caseSPEED:0.07 sec/60°at 6.6V0.06 sec/60° at 7.4VTORQUE:12.5 kgf/cm at 6.6V173.6 ozf/in at 6.6V14.0 kgf/cm at 7.4V194.4 ozf/in at 7.4VSIZE:40.5 mm x 21 mm x 26.9 mm1.59 in x 0.83 in x 1.06 inWEIGHT:48 g1.69 ozRATED VOLTAGE:DC 6.0V-7.4VOPERATING VOLTAGE:DC 4.8-8.4V FPHPS-A704
ABSIMA HV Digital Full-Alu Servo ST23DBF 23KG Team-Spec.
€89.95*
Product no.:
9797142
Manufacturer no.:
2030100
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Our "Team Spec." servos are mainly used in competition vehicles and offer a whole range of excellent features: TECHNICAL DATA HIGHLIGHTS:Servo Category: High-SpeedOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 12.0kg / 0.078sec/60°Torque / Speed @ 6.0V: 16.0kg / 0.066sec/60°Torque / Speed @ 7.4V: 19.0kg / 0.056sec/60°Torque / Speed @ 8.4V: 23.0kg / 0.050sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40*20*37.5 mmWeight: 80,5 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030100
ABSIMA HV Digital Full-Alu Servo ST50DBT 50KG Team-Spec.
€89.95*
Product no.:
9797143
Manufacturer no.:
2030101
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Our "Team Spec." servos are mainly used in competition vehicles and offer a whole range of excellent features: TECHNICAL DATA HIGHLIGHTS:Servo Category: High-TorqueOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 30.0kg / 0.175sec/60°Torque / Speed @ 6.0V: 37.0kg / 0.145sec/60°Torque / Speed @ 7.4V: 44.0kg / 0.130sec/60°Torque / Speed @ 8.4V: 50.0kg / 0.115sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40*20*37.5 mmWeight: 80,5 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030101
ABSIMA HV Digital Full-Alu Servo LP16DBF 16KG Team-Spec. Low Profile
€89.95*
Product no.:
9797145
Manufacturer no.:
2030102
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Our "Team Spec." servos are mainly used in competition vehicles and offer a whole range of excellent features: TECHNICAL DATA HIGHLIGHTS:Servo Category: High-Speed / Low ProfileOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 10.0kg / 0.078sec/60°Torque / Speed @ 6.0V: 13.0kg / 0.068sec/60°Torque / Speed @ 7.4V: 14.5kg / 0.062sec/60°Torque / Speed @ 8.4V: 16.0kg / 0.056sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40.8*20.2*26.5 mmWeight: 61,0 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030102
ABSIMA HV Digital Full-Alu Servo LP20DBT 20KG Team-Spec. Low Profile
€89.95*
Product no.:
9797146
Manufacturer no.:
2030103
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Our "Team Spec." servos are mainly used in competition vehicles and offer a whole range of excellent features: TECHNICAL DATA HIGHLIGHTS:Servo Category: High-Speed / Low ProfileOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 14.0kg / 0.100sec/60°Torque / Speed @ 6.0V: 17.0kg / 0.085sec/60°Torque / Speed @ 7.4V: 19.5kg / 0.078sec/60°Torque / Speed @ 8.4V: 20.0kg / 0.068sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40.8*20.2*26.5 mmWeight: 61,0 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030103
ABSIMA HV Digital Alu Servo ST18DBF 18KG Race-Spec.
€59.95*
Product no.:
9797147
Manufacturer no.:
2030104
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Fields of application for our "Race Spec. Servos" is the competition, but also for ambitious "club racers" and hobby drivers these servos are fantastic! TECHNICAL DATA HIGHLIGHTS:Servo Category: High-SpeedOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 14.0kg / 0.080sec/60°Torque / Speed @ 6.0V: 15.0kg / 0.072sec/60°Torque / Speed @ 7.4V: 16.5kg / 0.065sec/60°Torque / Speed @ 8.4V: 17.5kg / 0.058sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40*20*37.5 mmWeight: 73,0 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030104
ABSIMA HV Digital Alu Servo ST40DBT 40KG Race-Spec.
€59.95*
Product no.:
9797148
Manufacturer no.:
2030105
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Fields of application for our "Race Spec. Servos" is the competition, but also for ambitious "club racers" and hobby drivers these servos are fantastic! TECHNICAL DATA HIGHLIGHTS:Servo Category: High-TorqueOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 25.0kg / 0.140sec/60°Torque / Speed @ 6.0V: 29.0kg / 0.120sec/60°Torque / Speed @ 7.4V: 35.0kg / 0.105sec/60°Torque / Speed @ 8.4V: 40.0kg / 0.098sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40*20*37.5 mmWeight: 73,0 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030105
ABSIMA HV Digital Alu Servo LP15DBF 15KG Race-Spec. Low Profile
€59.95*
Product no.:
9797149
Manufacturer no.:
2030106
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Fields of application for our "Race Spec. Servos" is the competition, but also for ambitious "club racers" and hobby drivers these servos are fantastic! TECHNICAL DATA HIGHLIGHTS:Servo Category: High-Speed / Low ProfileOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 9.0kg / 0.082sec/60°Torque / Speed @ 6.0V: 12.0kg / 0.073sec/60°Torque / Speed @ 7.4V: 13.0kg / 0.065sec/60°Torque / Speed @ 8.4V: 15.0kg / 0.060sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40.8*20.2*27.2 mmWeight: 54,2 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030106
ABSIMA HV Digital Alu Servo LP19DBT 19KG Race-Spec. Low Profile
€59.95*
Product no.:
9797150
Manufacturer no.:
2030107
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used. Fields of application for our "Race Spec. Servos" is the competition, but also for ambitious "club racers" and hobby drivers these servos are fantastic! TECHNICAL DATA HIGHLIGHTS:Servo Category: High-Speed / Low ProfileOperating Voltage: 4.8 - 8.4V HVTorque / Speed @ 4.8V: 13.0kg / 0.105sec/60°Torque / Speed @ 6.0V: 16.0kg / 0.090sec/60°Torque / Speed @ 7.4V: 18.0kg / 0.080sec/60°Torque / Speed @ 8.4V: 19.0kg / 0.070sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6 - CNC machined with plastic inlayWaterproof Rating: IP65 water-resistantBearing: Metal ball bearings (2)Size: 40.8*20.2*27.2 mmWeight: 54,2 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately) 2030107
ABSIMA HV 3S/4S Digital Alu Servo LP34DBT Crawler-Spec. Waterproof
€89.95*
Product no.:
9797151
Manufacturer no.:
2030108
Servos are part of the "RC system" and thus the basis of a remote-controlled model.Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions. Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle. TECHNICAL DATA HIGHLIGHTS:Servo Category: High-Torque & High SpeedOperating Voltage: 7.4 - 16.8V HVTorque / Speed @ 12V: 26.0kg / 0.100sec/60°Torque / Speed @ 14.4V: 30.0kg / 0.090sec/60°Torque / Speed @ 16V: 33.0kg / 0.082sec/60°Torque / Speed @ 16.8V: 34.0kg / 0.078sec/60°Technology: DigitalMotor Type: BrushlessGear Material: Reinforced steelHousing Material: AL6061 T6Waterproof Rating: IP67 water-proofBearing: Metal ball bearings (2)Servo Arms: 1* Aluminum, 2* PlasticSize: 40.8*20.2*30.2 mm (Standard)Weight: 66,2 gProgrammable: Yes with USB Interface Adapter # 2030110 (sold separately)ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary! 2030108
CHASERVO HV3512H 25T low profile HV Brushless Servo, horizontal mounting
€119.90*
Product no.:
9795905
Manufacturer no.:
HV3512H
Designed for greatnessThe Chaservo HV3512 Low Profile Servo is a high-performance servo in the 20mm class.It is characterized by its low height of only 18.7 mm and its low weight of only 55 g. This makes it an ideal choice for models where weight and size are important.The servo is made of high-quality materials and has a robust design. The hardened steel gearbox is wear-resistant and ensures a long service life. The brushless motor delivers high torque and precision.The Chaservo HV3512 Low Profile Servo offers a holding force of up to 400 Ncm at 8.4 V. This makes it possible to move even heavy loads effortlessly. The rotation speed is 0.08 seconds at 8.4 V.The servo is available in two different installation variants. It can be mounted either vertically or horizontally. This offers you maximum flexibility during installation.Designed for greatnessThe Chaservo HV3512 Low Profile Servo is a high-performance servo in the 20mm class.It is characterized by its low height of only 18.7 mm and its low weight of only 55 g. This makes it an ideal choice for models where weight and size are important.The servo is made of high-quality materials and has a robust design. The hardened steel gearbox is wear-resistant and ensures a long service life. The brushless motor delivers high torque and precision.The Chaservo HV3512 Low Profile Servo offers a holding force of up to 400 Ncm at 8.4 V. This makes it possible to move even heavy loads effortlessly. The rotation speed is 0.08 seconds at 8.4 V.The servo is available in two different installation variants. It can be mounted either vertically or horizontally. This offers you maximum flexibility during installation.Advantages of the Chaservo HV3512 Low Profile ServoHigh performancePrecise designRobust designLow weightMinimum heighTwo installation variantsFor highest demandsThe Chaservo HV3512 Low Profile Servo is an excellent servo that is characterized by its high performance, precision, small size and weight. It is ideal for demanding models where weight and size play a role. HV3512H
CHASERVO HV3512 25T low profile HV Brushless Servo, vertical mounting
€119.90*
Product no.:
9794450
Manufacturer no.:
HV3512
Bestens geeignet für:FlugmodelleHelikopterRC-CarsStaub- und SpritzwassergeschütztSERVO DATANennspannung: DC 7.4VSpannungsbereich: DC 6V – 8.4VStandard-Winkel: ±100° = 200°Betriebsfrequenz: 1520µs/333HzBetriebstemperatur: -20°C … +65°CGehäuse-Material: AluminiumlegierungMotor Typ: 4 Pol Brushless DCGetriebe Material: Gehärteter StahlPositionssensoren: PotentiometerProgrammierbar: JaKugellager: DoppelkugellagerWasserfestigkeit: IP65Stalling Torque30 kg·cm @ 6.0V35 kg·cm @ 7.4V40 kg·cm @ 8.4VLeerlaufGeschwindigkeit0.14sec/60° @ 6.0V0.12sec/60° @ 7.4V0.11sec/60° @ 8.4VSteuersignal / PWM-SchnittstelleSignalspannungspegel Hoch: min. 3,3V, max. 5.0V / Niedrig: min. 0,0V, max. 1.5VImpulsbereich 900µs-2100µsImpuls-Winkel bei -60°/0°/+60°: 500µs/1500µs/2500µsElektrische Anschlüsse1 Orange PWM PWM-Steuersignal2 Rot DC+ Versorgungsspannung3 Braun DC- Versorgungsmasse, Signalmasse HV3512
-11%
FUTABA HPS A701 Air Low Profile Servo Met.geh. and MG (SR-capable)
€183.99*
€206.76*
(11.01% saved)
Product no.:
9792760
Manufacturer no.:
FPHPS-A701
FEATURES:– For all-purpose giant scale airplanes.– Programmable/High performance Brushless Servo.– Custom New high speed Brushless Motor.– Designed with F3A in mind– Programmable and compatible with S.Bus and S.Bus2 systems.– Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.– Final gear material is metal.– Upper/middle/bottom: Plastic caseSPEED:0.07 sec/60°at 6.6V0.06 sec/60° at 7.4VTORQUE:14.5 kgf/cm at 6.6V16.0 kgf/cm at 7.4VSIZE:40.5 mm x 21 mm x 26.9 mmWEIGHT:48 gRATED VOLTAGE:DC 6.0V-7.4VOPERATING VOLTAGE:DC 4.8-8.4V FPHPS-A701
MKS HBL550 HV Digital Servo brushless X5 Series
€109.99*
Product no.:
9791535
Manufacturer no.:
S0026004
Servo specifications:Torque (kg-cm): 29 (6.0V) / 36 (7.4V) / 38 (8.2V)Speed: 0.119 s (6.0V) / 0.094 s (7.4V) / 0.085 s (8.2V)Stall Current (at locked load): 9.0A (6.0V) / 11A (7.4V) / 12A (8.2V)Working Voltage: 6.0V ~ 8.4V DC VoltsWorking Frequency: 1520µs / 333HzDead Band: 0.001 ms (Default)Bearing:2x Ball BearingGear: Metal Alloy GearMotor: Brushless MotorWeight: 79.5 g (2.80 oz)Dimension: 40 x 20 x 38.8 mmServothickness:20mmServovoltage:max 8.4VServotype:Car servo S0026004
-9%
SPEKTRUM A6350 Ultra Torque / High Speed Brushless HV Servo
€199.99*
€219.99*
(9.09% saved)
Product no.:
9790100
Manufacturer no.:
SPMSA6350
A6350 Ultra Torque High Speed Brushless MG HV ServoThe Spektrum™ A6350 Ultra-Torque / High Speed Brushless HV Servo is the next evolution in the expanding line of leading-edge performance servos from Spektrum". Designed with the extraordinarily strong and reliable A6300-series brushless gear train, the A6350 servo takes power and speed to the next level! The A6350 is a top-of-its-class workhorse that's ready for the demands of whatever giant-scale, 3D, or jet model you fly. And the A6350 servo is also a good choice for any application that requires high performance, high speed, and ultimate power.Key FeaturesHigh Voltage (HV) capableSuperior torque and speed in a standard servo sizeDurable and long-lasting brushless motorLow wear and tightly meshed all metal gear trainDual bearing supported drive train helps maximize smooth operationFeaturesHigh Voltage (HV) capable (6.0-8.4v input range)Superior torque and speed in a standard servo size (61.4 kg-cm and .095 sec/60° @8.4v)Durable and long-lasting brushless motorLow wear and tightly meshed all metal gear trainDual bearing supported drive train helps maximize smooth operationAluminum servo case helps keep operating temperatures lowSoft start helps prevent component and airframe damage during un-intentional initializationsOver Current and Temperature protectionHelpful initialization start tone lets pilot know when the servo is readyIntegrated servo failsafe holds last known position if signal is lost and power is maintainedOperating Frequency: 200hz to 333hz SPMSA6350
-10%
MKS HBL6625 MINI HV Digital Servo brushless
€139.99*
€155.99*
(10.26% saved)
Product no.:
9788340
Manufacturer no.:
S0021002
For F3F F3J F3B series flap, aileronTorque: 5.2 kg-cm (6.0V) / 5.6 kg-cm (7.4V) / 6.0 kg-cm (8.2V)Speed: 0.14 s (6.0V) / 0.11 s (7.4V) / 0.10 s (8.2V)Weight: 26.97 gDimension: 30 x 10 x 29.9 mm Working Voltage: 4.8~8.4 V DC Volt (2S Lipo un-regulated)Working frequency: 1520µs / 333hzDead Band: 0.001 ms (Default)Bearing: Dual Ball BearingsMotor: Brushless MotorGear: Chrome-Titanium alloy gear S0021002
SAVÖX SB-2262SG (8,4V/30KG/0,065s) DIGITAL HV LOW PROFILE SERVO BLACK LINE
€114.99*
Product no.:
9778575
Manufacturer no.:
SB2262SG
SB-2262SG HV Digital Brushless Servo Low Profile 30kg Black Edition Versatile, whether swashplate servo, in Rc-Car or wing models! With the new SB-2262SG servo a new servo of superlatives joins the SAVÖX Monster series. This powerhouse in low profile design provides 30kg of power at 8.4V and is extremely fast with 0.065 sec. to 60° despite the high power. The patented design has been adopted and adapted from the SB-229X series. So it has become possible to deliver these gigantic values, which until recently were only possible with good servos of the standard design. Of course the SB-2262SG also has a soft start, so the linkage in the model is protected. Due to its design and the low weight of 62 grams the application is extremely wide spread. Whether in RC-Car or in fixed-wing aircraft with limited space, the SB-2262SG fits perfectly for the most versatile applications. Of course it can also be used as a swashplate servo, even helicopters of the 700 class do not present a problem for this powerhouse. Its high speed makes it ideal in combination with gyroscopes and flybarless systems. As usual, the output is equipped with 25 teeth, so all common servo arms are compatible. HV stands for High-Voltage. Savöx servos marked in this way can be operated with up to 8.4V voltage. The use of a 2s LiPo battery is therefore possible without any problems. All HV servos can of course also be operated with a lower voltage from 4.8V, but less power is available. Features: Low Profile HV Brushless Servo 30kg power at 8,4V 0,065 sec. on 60° Patented design incl. Soft Start Technical Data: Packaging: Standard actuating time S2/60°: 0.065 sec. at 8.4V actuating time S1/60°: 0.08 sec. Width: 20.2 mm Actuating force S1: 25 kg Height: 25.75 mm Actuating force S2: 30 kg Voltage range: 4.8V-8.4V Length: 40.8 mm Weight: 62 g High voltage capable: Yes Application: Helicopter, Airplane, Car Classification: Low Profile Ball Bearings: 2 pieces Output Teeth: 25 Voltage 1: 7.4 V Motor Type: Brushless Motor Gear Type: Steel Housing Type: All Metal Voltage 2: 8.4 V SB2262SG
SAVÖX SB-2265MG (7,4V/12KG/0,08s) BRUSHLESS DIGITAL HV LOW PROFILE SERVO
€64.90*
Product no.:
9770548
Manufacturer no.:
SB2265MG
Features:Metal gear train ensures durability under harsh situations.Ideal for 1/10 on road cars requiring a high speed servoServo Type / Size: Low ProfileApplication: 1/10 CarsMotor Type: BrushlessGear Material: SteelSpecifications:Input Voltage (V): 7.4vTorque @ 7.4v – 12.0kg/166.6oz-inSpeed @ 7.4v – 0.08 sec/60 degDimensions L x W x H (mm): 40.8 x 20.2 x 25.4Weight: 57.0gSpline size: 25T SB2265MG
-29%
TRAXXAS SERVO 2255 DIGITAL HIGH-TORQUE 400 BRUSHLESS, METAL GEARS
€78.99*
€110.95*
(28.81% saved)
Product no.:
9766982
Manufacturer no.:
TRX2255
TRX2255
SPEKTRUM A6300 Standard Digital HV Ultra Torque Brushless Metal Gear Aircraft Servo
€169.99*
Product no.:
9746645
Manufacturer no.:
SPMSA6300
The A6300 is the first in an evolving line of Spektrum brushless servos that provide leading edge performance with uncompromised reliability. Boasting an extremely powerful 530 oz-in torque and a lightning fast .10 sec/60° transit time @8.4v, the A6300 will make RC enthusiasts take a second look at Spektrum Servos. The A6300 features a top of the line brushless drive train that is recognized as being exceptionally strong and reliable. This durability is expertly matched with a low wear, all metal gear train that is virtually slop free. All housed in a heatsinking, all-aluminum case with preinstalled eyelets and grommets, which makes mounting these servos quick and easy. The Spektrum A6300 uses these features as a foundation to produce a powerful, consistent, yet efficient servo that will prove to be in a class of its own. It is these awesome capabilities that make the A6300 a fantastic choice for giant-scale models, 3D aerobats, jets or any application where massive amounts of torques and holding power are a must.FeaturesHigh Voltage (HV) capable (6.0-8.4v input range)Outstanding torque and speed in a standard servo size (530 oz-in and .10 sec/60° @8.4v)Durable and long lasting brushless motorLow wear and tightly meshed all metal gear trainDual bearing supported drive train helps maximize smooth operationAll aluminum servo case helps keep operating temperatures lowSoft start helps prevent component and airframe damage during un-intentional initializationsOver Current and Temperature protectionHelpful initialization start tone lets pilot know when the servo is readyIntegrated servo failsafe holds last known position if signal is lostTorque: 378.37 oz-in (27.26 kg-cm) @ 6.0V; 467.06 oz-in (33.65 kg-cm) @ 7.4V; 530.22 oz-in (38.20 kg-cm) @ 8.4VSpeed: 0.14 sec/60 deg @ 6.0V; 0.11 sec/60 deg @7.4V; 0.10 sec/60 deg @ 8.4V SPMSA6300
SAVÖX SB-2292SG (7,4V/31KG/0,07s) BRUSHLESS DIGITAL HV SERVO BLACK LINE
€119.99*
Product no.:
9738546
Manufacturer no.:
SB2292SG
The SAVÖX SB-2292 is a newly developed servo with up to 35% more torque for 7.4V in an aluminium housing. 3 ball bearings and steel gears at only 81g are impressive values. suitable for electric/nitro vehicles and aircraft. SB2292SG
-35%
SAVÖX SB-2283MG (7,4V/10KG/0,048s) BRUSHLESS DIGITAL HV SERVO
€64.99*
€99.99*
(35% saved)
Product no.:
9710602
Manufacturer no.:
SB2283MG
Field of application: helicopter, airplane SB2283MG
-44%
ABSIMA ACS1612BL LOW PROFILE SERVO COMBAT SERIES
€49.99*
€89.95*
(44.42% saved)
Product no.:
9709972
Manufacturer no.:
2030021
...is the revolutionary servo generation "Made by Absima". Reliable, powerful and extremely robust - the elitist way to move a model. Combat - Safety: All servo gears are made of extremely robust quality steel and are therefore much more resistant than titanium alloys. Application area: Car and flight for racer and competition 2030021
-4%
SAVÖX SB-2230SG (7,4V/42KG/0,13s) BRUSHLESS DIGITAL HV SERVO
€109.99*
€114.99*
(4.35% saved)
Product no.:
9709944
Manufacturer no.:
SB2230SG+
SB2230SG+
-12%
HITEC HSB-9380 TH ULTRA TORQUE BRUSHLESS HV SERVO
€149.99*
€169.99*
(11.77% saved)
Product no.:
9709020
Manufacturer no.:
116380
HSB-9380TH Ultra Torque Brushless Servo with titanium gear for constant power. Ideal for large airplanes and 1/8, 1/5 scale on&offroad cars. Data: HV / TG / 12bit / H25T / PRG / NRG.New, sensational power saving technology - up to 90 % less energy consumption! Thanks to the high performance motors from Neu/Castle and a newly developed electronics "Power Miser"", these servos deliver the best values in each case. Our new brushless servos have the advantage over all other brushless servos, that you have a significantly lower power consumption for the same output. This is a new approach and sets us apart from our competitors. This is achieved by feeding back the energy generated when the servo is braked (generator principle) into its drive battery. If you use a battery backer, a BEC voltage of your speed controller, the PAD (PowerAbsorbingDevice) supplied with each servo can simply be plugged in parallel to the servo and the servos behave like any other known servo. A further feature is the slow approach to the neutral position after commissioning. The rudder and its mechanisms on large models are spared and the model gets ready for use at rest. PAD The Power Absorbing Device prevents the reflux of current in the case of incompatible ENERGY EFFICIENT connections. Follow the instructions! Excellent quality at a fair priceSophisticated SMD technologyHigh positioning forces and high actuating speedsRobust mechanical construction of the gear unitExtensive range of accessories Proven competitive materialD: 32-bit resolutionTW: Titanium, wide voltage (4.8V-8.4V)SW: steel, wide voltage (4.8V-8.4V)MW: Metal, wide voltage (4.8V-8.4V)HSB: Brushless MotorSGT: Steel gearbox for high torquePRG: programmableNRG: low current consumptionTH: Titanium drives - 8,4VSH: Steel gearbox - 8,4VMH: Metal gear unit - 8,4VBra: Plastic gear unit - 8,4VTG: Titanium drives with ball bearingsMG: Metal gear unit with ball bearingsHB: Carbonit gearbox with ball bearings BB: ball bearing mountedHD: Carbonite transmissionWP: WaterproofG2: Second Generation 116380
SAVÖX SB-2271SG (7,4V/20KG/0,065) BRUSHLESS DIGITAL HV SERVO
€93.99*
Product no.:
92986
Manufacturer no.:
SB2271SG
The new Savöx SB-2271SG Brushless Digital Servo combines high speed and high torque. Perfect for helicopters, 1/10 and 1/8 onroad and offroad vehicles. SB2271SG
New
KAVAN GO-1088MGW (0.125s/60°, 74kg.cm)
€127.59*
Product no.:
9801773
Manufacturer no.:
KAV20.1088MGW
Super high torque/high speed waterproof programmable digital standard 85g brushless servo with a magnetic encoder, quadruple BB-ed hardened steel gears. Works great in large/giant planes, helicopters, 1:8–1:5 off-road RC cars, speed boats, sailboats etc. An waterproof/dustproof (IP67 standard) all-aluminium case for perfect cooling under high load and thorough protection.GO-1088MGW is programmable using the KAVAN GO servo USB programmer/interface and PC software.Programmable FunctionsServo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).Servo Neutral: Servo neutral (centre) position setting.Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.Reverse: Reverses the servo movement direction.Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:(a) Release: No fail-safe protection.(b) Keep Position: Keeps the position corresponding to the last correct control signal.(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).Default: Restores the factory default setting of the connected servo.Wide input voltage range 4.8-8.4 V (nominal).25T/5.92 mm output shaft. KAV20.1088MGW