Filter
–
–
–
–
–
–
–
–
–
-39%
GRAUPNER DES 806 BB MG DIGITAL SERVO
€39.90*
€64.90*
(38.52% saved)
Product no.:
9778004
Manufacturer no.:
7952
Especially suitable for motor and glider models, helicopters, boat models and RC-Car. Graupner servos represent a product line which provides the right servo for almost every application with a wide range of specifications. Different sizes, gear designs, actuating forces and actuating times designed for the beginner to the competition pilot. - C Series: proven analogue servos from JR, proven a thousand times over- DS series: digital servos from JR, extremely precise neutral position and smooth control characteristics due to 13 bit ACD system with 5,900 steps- DES series: low-cost digital servos, for universal applications in model making with high-quality Atmel microcontroller- HVS series; High-Voltage servos for direct connection to 2-cell Lipo batteries - HBS series: High-Voltage - Brushless servos for direct connection to 2-cell lipo batteries, with incomparable acceleration behaviour- HVC / HCM series: High-Voltage - Corless Servos for direct connection to 2-cell Lipo batteries, highest production quality, some with metal housing (HCM) 7952
GRAUPNER DES 587 BB MG DIGITAL SERVO
€59.90*
Product no.:
9778002
Manufacturer no.:
7932
Especially suitable for motor and glider models, micro helicopters and RC boat models.warning notes of the company Graupner/SJ! Possible malfunction with this servoWith this servo with metal gear the potentiometer operating voltage is transmitted to the metal axis of the servo. The use of aluminium control horns or a non-insulated RDS linkage with a conductive connection, e.g. in a full carbon fibre model, causes mutual interference between the servos, as the above-mentioned voltage is transmitted. Therefore please use either plastic control surface horns or insulate the mountings so that there is no electrical connection.The Graupner/SJ GmbH company as manufacturer recommends that you use only components and accessories which have been tested for suitability and safety by Graupner/SJ and which have been approved for use. In this case Graupner/SJ will assume product responsibility for you. Graupner/SJ accepts no liability for non-approved parts or accessory products from other manufacturers and cannot evaluate every single third-party product. Whether it can be used without safety risk. Graupner servos represent a product line which provides the right servo for almost every application with a wide range of specifications. Different sizes, gear designs, actuating forces and actuating times designed for the beginner to the competition pilot. - C Series: proven analogue servos from JR, proven a thousand times over- DS series: digital servos from JR, extremely precise neutral position and smooth control characteristics due to 13 bit ACD system with 5,900 steps- DES series: low-cost digital servos, for universal applications in model making with high-quality Atmel microcontroller- HVS series; High-Voltage servos for direct connection to 2-cell Lipo batteries - HBS series: High-Voltage - Brushless servos for direct connection to 2-cell lipo batteries, with incomparable acceleration behaviour- HVC / HCM series: High-Voltage - Corless Servos for direct connection to 2-cell Lipo batteries, highest production quality, some with metal housing (HCM) 7932
GRAUPNER DES 707 BB MG Digital Servo
€53.90*
Product no.:
9778005
Manufacturer no.:
7945
Especially suitable for motor- and glider models, boat models and RC-Off-Road-Car, M 1:8 and 1:5. Do not use in full carbon fiber surfaces with RDS linkage with electrical connection or with aluminum levers! The gearbox or the RDS linkage or the alloy levers must be electrically insulated! 2 x ball bearingMetal gearboxes 7945
-24%
GRAUPNER DES 281 BB MG DIGITAL SERVO
€27.90*
€36.90*
(24.39% saved)
Product no.:
95171
Manufacturer no.:
7905
Especially suitable for indoor models and park flyers.- Mounting dimensions in relation to output the same as C261 servo- Smallest dimensions- Absolutely light weight- Parameters adjustable via PC software- ball bearings- metal gearbox Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7905
GRAUPNER DES 678 BB MG DIGITAL SERVO
€54.90*
Product no.:
78328
Manufacturer no.:
7943
Besonders geeignet für Motor- und Segelflugmodelle, Helikopter, Bootsmodelle und RC-Car. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7943
GRAUPNER DES 657 BB DIGITAL SERVO
€40.90*
Product no.:
78323
Manufacturer no.:
7935
Besonders geeignet für Motor- und Segelflugmodelle sowie Helikopter. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7935
GRAUPNER DES 586 BB DIGITAL SERVO
€40.90*
Product no.:
78320
Manufacturer no.:
7931
Besonders geeignet für Motor- und Segelflugmodelle, Micro Helikopter und RC-Car. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7931
-27%
GRAUPNER DES 567 MG DIGITAL SERVO
€39.90*
€54.90*
(27.32% saved)
Product no.:
78317
Manufacturer no.:
7923
Suitable for RC model aircraft and boats. Do not use in carbon wings with RDS. Voltage of potentiometer on the gear must be isulated to carbon parts.Warning - Potential problems with this servo!This servo features metal gears, and the potentiometer operating voltage is passed to the servo’s metal output shaft. If an aluminium control surface horn or a non-insulated RDS linkage is used with the servo, and if an electrically conductive contact with the airframe also exists - e.g. in an all-carbon model - the servos will interact with each, as the aforesaid voltage is transmitted between them. You can avoid this problem either by using a plastic control surface horn, or by insulating the servo mount in such a way that no electrical connection exists.As manufacturer, Graupner/SJ GmbH recommends the exclusive use of accessories which have been tested and approved by Graupner/SJ, as this ensures that they are fit for purpose, work correctly and are safe. If you observe this advice, Graupner/SJ accepts liability to you for the product. Graupner/SJ is not in a position to assess the safety risk of every individual product made by other companies. For this reason we deny all liability If you use non-approved components, or accessories made by other manufacturers. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7923
GRAUPNER DES 448 BB MG DIGITAL AREA SERVO
€54.90*
Product no.:
79954
Manufacturer no.:
7914
This digital servo is the ideal surface servo for your model due to its extremely slim design and highest positioning accuracy. The double ball-bearing precision gear made of metal ensures precise positioning characteristics at high force and speed. Additional, universally applicable mounting brackets allow a comfortable and flexible mounting of the servo even lying on the wing. The perfect solution for cramped mounting conditions. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7914
GRAUPNER DES 577 BB DIGITAL SERVO LOOSE
€27.90*
Product no.:
95175
Manufacturer no.:
7944
The DES 577 BB delivers high torque, high speed and high holding power. The SMT circuitry makes the DES 577 BB the perfect choice for gliders, helicopters, boats and cars. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7944
GRAUPNER DES 658 BB MG DIGITAL SERVO
€54.90*
Product no.:
78324
Manufacturer no.:
7936
Besonders geeignet für RC-Flugmodelle, Micro Helikopter und RC-Bootsmodelle. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7936
Robbe Modellsport FS 155 BB MG DIGITAL SERVO
€18.99*
Product no.:
9756185
Manufacturer no.:
9106
The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality you achieve a maximum of power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio.The Robbe FS 155 BB MG is a typical wing servo of the 11mm class with a full metal gearbox and steel output wheel/shaft, which have been designed for extreme loads and durability.The housing is made of impact-resistant, tough plastic, which is extremely temperature stable. The motor and digital control electronics meet the highest quality standards and the Japan potentiometer ensures maximum reset accuracy.The FS 155 BB MG is very well suited as a wing servo for ailerons and thanks to its robustness also for flaps.It can be used on ailerons in hotliners or in gliders up to 4m wingspan, e.g. F5J. The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality, you achieve maximum power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio. 9106
Robbe Modellsport FS 166 BB MG DIGITAL SERVO
€19.99*
Product no.:
9756143
Manufacturer no.:
9105
The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality you achieve a maximum of power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio.The Robbe FS 166 BB MG is a typical surface servo of the 9mm class with a slim housing. It is made of impact-resistant, tough plastic, which is extremely temperature stable. The motor and digital control electronics meet the highest quality standards.The FS 166 BB MG is very well suited as a wing servo for ailerons and thanks to its robustness also for flaps in thin wing profiles, e.g. in smaller hotliners (F5B), pylon models (F5D), but also in electric gliders of the class F5J. The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality, you achieve maximum power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio. 9105
Robbe Modellsport FS 510 BB MG Servo with partial Aluminium Case, Digital
€23.99*
Product no.:
9755912
Manufacturer no.:
9102
The Robbe FS 510 BB MG Digital is a very strong and robust standard servo. The full metal gearbox is extremely resistant, even under sudden loads, such as flaps in motor planes, large gliders or as a steering servo in RC cars. The housing middle part consists of aluminium for better heat dissipation. The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality, you achieve maximum power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio. 9102
Robbe Modellsport FS 300 BB MG DIGITAL SERVO
€20.49*
Product no.:
9755911
Manufacturer no.:
9101
The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality you achieve a maximum of power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio.The Robbe FS 300 BB MG Digital is a 15/16mm-class servo with high positioning speed. It is mainly flown in 50-60 aerobatic models on all rudders. But it can also be used for gliders up to 5m wingspan as aileron and flap servo. The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality, you achieve maximum power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio. 9101
Robbe Modellsport ROVOR SERVO S0009 DIGITAL MG
€11.99*
Product no.:
9723497
Manufacturer no.:
S0009D
Features:- Type 10-14.9mm - Motor 3 pole - Speed 60° (sec) 4.8V 0.12 - Actuating force (KG) 4.8V 1.3 - Cable 180mm - Connector JR/Futaba - Teeth 21 - Operating temperature in °C -20° to +60° C - Working angle 45° one-sided 500µsec - Power consumption 4.8V 10mA idle, 120mA idle - Power consumption 6.0V 10mA idle, 150mA idle - Power consumption Standstill 4.8V 0.9A - Current consumption Stability 6.0V 1.0A - Dead band 4 µsec - Pulse (PWM) 1500 µsec "ROVOR" High Perfromance Servo Serie S0009D
GRAUPNER DES 261 BB DIGITAL SERVO LOOSE (VE 12)
€334.80*
Product no.:
9793345
Manufacturer no.:
7903.LOSE
Specially suitable for indoor models and parkflyers. Smallest dimensions. Absolutely low weight. Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7903.LOSE
GRAUPNER DES 708 BB MG DIGITAL SERVO
€43.90*
Product no.:
9778003
Manufacturer no.:
7946
Especially suitable for motor- and glider models, boat models and RC-Car. Graupner servos represent a product line which provides the right servo for almost every application with a wide range of specifications. Different sizes, gear designs, actuating forces and actuating times designed for the beginner to the competition pilot. - C Series: proven analogue servos from JR, proven a thousand times over- DS series: digital servos from JR, extremely precise neutral position and smooth control characteristics due to 13 bit ACD system with 5,900 steps- DES series: low-cost digital servos, for universal applications in model making with high-quality Atmel microcontroller- HVS series; High-Voltage servos for direct connection to 2-cell Lipo batteries - HBS series: High-Voltage - Brushless servos for direct connection to 2-cell lipo batteries, with incomparable acceleration behaviour- HVC / HCM series: High-Voltage - Corless Servos for direct connection to 2-cell Lipo batteries, highest production quality, some with metal housing (HCM) 7946
GRAUPNER DES 488 BB MG DIGITAL SERVO
€44.90*
Product no.:
9778001
Manufacturer no.:
7919
Especially suitable for motor and glider models as well as micro-helicopters.warning notes of the company Graupner/SJ! Possible malfunction with this servoWith this servo with metal gear the potentiometer operating voltage is transmitted to the metal axis of the servo. The use of aluminium control horns or a non-insulated RDS linkage with a conductive connection, e.g. in a full carbon fibre model, causes mutual interference between the servos, as the above-mentioned voltage is transmitted. Therefore please use either plastic control surface horns or insulate the mountings so that there is no electrical connection.The Graupner/SJ GmbH company as manufacturer recommends that you use only components and accessories which have been tested for suitability and safety by Graupner/SJ and which have been approved for use. In this case Graupner/SJ will assume product responsibility for you. Graupner/SJ accepts no liability for non-approved parts or accessory products from other manufacturers and cannot evaluate every single third-party product. Whether it can be used without safety risk. Graupner servos represent a product line which provides the right servo for almost every application with a wide range of specifications. Different sizes, gear designs, actuating forces and actuating times designed for the beginner to the competition pilot. - C Series: proven analogue servos from JR, proven a thousand times over- DS series: digital servos from JR, extremely precise neutral position and smooth control characteristics due to 13 bit ACD system with 5,900 steps- DES series: low-cost digital servos, for universal applications in model making with high-quality Atmel microcontroller- HVS series; High-Voltage servos for direct connection to 2-cell Lipo batteries - HBS series: High-Voltage - Brushless servos for direct connection to 2-cell lipo batteries, with incomparable acceleration behaviour- HVC / HCM series: High-Voltage - Corless Servos for direct connection to 2-cell Lipo batteries, highest production quality, some with metal housing (HCM) 7919
GRAUPNER DES 261 BB Digital Servo
€28.90*
Product no.:
9777998
Manufacturer no.:
7903
Don't let the small size fool you: you will be surprised by the precision, torque and speed that the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. 7903
GRAUPNER DES 428 BB MG DIGITAL SERVO
€47.90*
Product no.:
78309
Manufacturer no.:
7911
Besonders geeignet für Motor- und Segelflugmodelle Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7911
GRAUPNER DES 427 BB DIGITAL SERVO
€36.90*
Product no.:
78308
Manufacturer no.:
7910
Especially suitable for motor and glider models.Graupner servos represent a product line which supplies the right servo with the most varied specifications for almost every field of application. Different sizes, gear designs, actuating forces and actuating times designed for the beginner to the competition pilot.C Series: proven analog servos from JR, proven a thousand times overDS series: digital servos from JR, extremely precise neutral position and smooth control characteristics through 13 bit ACD system with 5,900 stepsDES series: low-cost digital servos, for universal applications in model making with high-quality Atmel microcontrollerHVS series; High-Voltage servos for direct connection to 2-cell Lipo batteriesHBS series: High-Voltage - Brushless servos for direct connection to 2-cell lipo batteries, with an incomparable acceleration performanceHVC / HCM series: High-Voltage - Corless Servos for direct connection to 2-cell Lipo batteries, highest production quality, partly with metal housing (HCM) Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models. The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.FEATURESDigital servo featuring dynamic torque, excellent Speed, superior response and holding torqueProgrammable Digital Circuit and SMT circuitry1024 high resolutionSupporting 1-16µ depending on programmingSupports a wide range of frame rates 20Hz-400Hz10-bit processing circuit 7910
New
MULTIPLEX Servo MS-12014 DIGI
Product no.:
9800460
Manufacturer no.:
1-02984
1-02984
This product is currently not available.
-8%
MKS DS1210 Digital Servo
€32.99*
€35.90*
(8.11% saved)
Product no.:
9799027
Manufacturer no.:
S0016001
Torque: 8.05 kg-cm (4.8V) / 9.2 kg-cm (5.5V)Speed: 0.15 s (4.8V) / 0.131 s (5.5V)Weight: 56 gDimensions: 40 x 20 x 40 mmOperating Voltage: 4.8 - 5.5 V DC VoltsWorking frequence: 120hzDead band: 0.002ms (Default)Bearing Type: 2BBMotor Type: DC MotorGear Type: Chrome-Titanium alloy gearNOTE: Use with 4 cell Nicd/NiMH battery or use UBEC (4.8V-5.5V) S0016001
-7%
MKS DS75K-N Digital Servo Typ B
€65.99*
€70.90*
(6.93% saved)
Product no.:
9798919
Manufacturer no.:
S0015009
For DLG, HLG / F3K Competitions S0015009
SAVÖX SH-1290MG+ (6V/5KG/0.05s) CORELESS DIGITAL SERVO
€51.99*
Product no.:
9798365
Manufacturer no.:
SH1290MG+
SH1290MG+
SAVÖX SH-0253+ (6V/2.2KG/0.09s) DIGITAL SERVO
€19.99*
Product no.:
9796802
Manufacturer no.:
SH0253+
The Savox SH-0253 Plus micro, digital servo has a nice balance of torque and speed in addition to using a combination of industrial plastic and metal gears for added durabilty and smoothness."Plus" series servos feature Soft Start and Sanwa SSR compatibility.Features:Aluminum middle case allows for cooler operating temperatures.Industrial plastic and metal gear train ensures durability and longevity.Ideal for small planes, and 450 size helicopters.Specifications:Torque @ 4.8v - 1.8kg/25.0oz-inTorque @ 6v - 2.2kg/30.6oz-inSpeed @ 4.8v - 0.13 sec/60 degSpeed @ 6v - 0.09 sec/60 degDimensions L x W x H (mm):22.8 x 12.0 x 25.4Weight: 13.6g SH0253+
SAVÖX SH-0264MG+ (6V/1,2KG/0,06) DIGITAL SERVO
€25.99*
Product no.:
9796801
Manufacturer no.:
SH0264MG+
The SAVÖX SH-0264MG metal-gear, super speed, digital, micro servo is the ultimate fast micro servo.Features:Metal gear train ensures durability and longevity.Aluminum middle case allows for cooler operating temperatures.Ideal for small planes, and 450 size helicopters.Extremely fast speed for immediate response.Dual ball bearing support.Specifications:Torque @4.8v – 0.8kg/11.1oz-inTorque @6v – 1.2kg/16.7oz-inSpeed @4.8v – 0.08 sec/60 degSpeed @6v – 0.06 sec/60 degDimensions L x W x H (mm):22.8 x 12.0 x 25.4Weight: 15.0g SH0264MG+
SAVÖX SH-0254+ (6V/3,9KG/0,13s) DIGITAL SERVO
€18.99*
Product no.:
9795484
Manufacturer no.:
SH0254+
The Savox SH-0254 Plus micro, digital servo has plenty of torque and uses a combination of industrial plastic and metal gears for added durabilty and smoothness."Plus" series servos feature Soft Start and Sanwa SSR compatibility.Features:Aluminum middle case allows for cooler operating temperatures.Industrial plastic and metal gear train ensures durability and longevity.Ideal for small planes, and 450 size helicopters.Specifications:Torque @4.8v - 3.1kg/43.1oz-inTorque @6v - 3.9kg/54.2oz-inSpeed @4.8v - 0.16 sec/60 degSpeed @6v - 0.13 sec/60 degDimensions L x W x H (mm):22.8 x 12.0 x 29.4Weight: 15.8gOperating Temperature: 14° - 122°F (-10° - 50°C)Running Current (no load): 180mA @4.8V, 240mA @6.0VStall Current (at locked): 1200mA @4.8V, 1400mA @6.0VIdle Current: 5mA @4.8V, 5mA @6.0VWire Length: 250 ± 5mmOutput Gear Spline: 21 ToothBearings: 1BBOperating Travel: 90° (1000 - 2000 µ second)Neutral Position: 1500 µ secondPulse Width Range: 750 - 2250 µ secondMaximum Travel: Appx 145° (750 - 2250 µ second)Refresh Rate: 240 HzMotor Type: BrushedNote: This servo can be upgraded to metal gears by using the gear set for SH0255MG SH0254+
SAVÖX SH-0257MG+ (6V/2.2KG/0.09s) DIGITAL SERVO
€22.99*
Product no.:
9795338
Manufacturer no.:
SH0257MG+
The Savox SH-0257MG Plus metal-gear, high-torque, digital, micro servo produces as much output torque as larger servos, but without sacrificing speed."Plus" series servos feature Soft Start and Sanwa SSR compatibility.Features:Metal gear train ensures durability and longevity.Aluminum middle case allows for cooler operating temperatures.Ideal for small planes, and 450 size helicopters.Specifications:Torque @ 4.8v - 1.8kg/25.0oz-inTorque @ 6v - 2.2kg/30.6oz-inSpeed @ 4.8v - 0.13 sec/60 degSpeed @ 6v - 0.09 sec/60 degDimensions L x W x H (mm):22.8 x 12.0 x 25.4Weight: 14.0gOperating Temperature: 14° - 122°F (-10° - 50°C)Running Current (no load): 150mA @4.8V, 180mA @6.0VStall Current (at locked): 1000mA @4.8V, 1200mA @6.0VIdle Current: 5mA @4.8V, 5mA @6.0VWire Length: 250 ± 5mmOutput Gear Spline: 21 ToothBearings: 1BBOperating Travel: 90° (1000 - 2000 µ second)Neutral Position: 1500 µ secondPulse Width Range: 700 - 2300 µ secondMaximum Travel: Appx 150° (700 - 2300 µ second)Refresh Rate: 240 HzMotor Type: Brushed SH0257MG+