NEWS

This powerful Xerun combo is specifically designed for 1/8 scale off-road cars and includes the latest generation XR8 Pro ESC. This G3 ESC is 15% smaller, more powerful and with an even lower temperature generation compared to its predecessor. There is also an adjustable BEC that allows the use of a wide variety of servos of Your choice. Fittingly, a 4268 SD G3 motor pairs up with it, which with its 2200kV, like the ESC, is a lot more powerful and efficient than its predecessor. In combination with each other, the result is a 100% sensor-controlled drive system and thanks to the Hall sensor system, this combo results in an overall clean and stable sensor mode run.Features:Over 30 different parameters available3 preset profiles for 1/8 Racing (e.g. Zero Timing/Blinky Mode, 1/8 Off-Road Racing, 1/8 On-Road Racing) includedSuper BEC with max. 12A and 6V or 7.4V for using a wide variety of servosEasy programming with the OTA programming module, the LCD programming box or a smartphoneLow heat developmentLow cogging torqueHigh-quality materials and excellent workmanshipEasy constructionTechnical Specifications:ESCType:Brushless SensoredCurrent (cont/peak): 200A/1080ACells: 2S-4S LiPoBEC: 6V/7.4V @ 6A (Switch Mode)Waterproof: NoProgramming: LCD Programm Box G2 / OTA Bluetooth Programmer / Independent programming portDimensions: 54.8x36.8x38.8mmWeight: 102.8gApplication: 1/8 Off-Road, On-Road, Racing,1/10 Short Course, Monster TruckMotorScale: 1/8Type: Brushless SensoredkV Rating: 2200kVNo-Load Current: 4.1ACells: 2-6SPoles: 4Diameter: 42mmLength: 67.8mmShaft Diameter: 5mmWeight: 285gTiming: 20-40 degree (adjustable) HW38020433

HW38020432

HW38020369

Das Furitek STINGER 118 Brushless System kommt mit dem leistungsstarken Micro Komodo Motor und einem Lizard Pro Esc mit Bluetooth-Modul.Durch das integrierte Bluetooth Modul können sie jederzeit Einstellungen an ihrem Modell, bequem per App ändern. Das System ist NICHT mit der Originalen TRX-4M Steuerung und Empfänger kompatibel, sie benötigen einen externen Empfänger. FUR2260

The Ezrun Max10 G2 Combo with its updated 80A ESC combo is here, including several updates and tweaks that make driving 1/10 short courses and trucks even more enjoyable. The ESC comes with a 3652SD motor with 5400kV.In a direct comparison to the regular MAX10 combo, it is clear that the sensor mode and the accompanying waterproof cable have been heavily revised and now ensure great throttle response. The fantastic acceleration with stable output power as well as the nice linearity at low speeds are also among the aspects that have been particularly improved. When it comes to heat development, the MAX10 G2 Combo really outperforms other comparable products. This is partly due to the optimizations in the design and of course also due to the larger capacitors.The perfect introduction to get started right away with a 1/10 car!Features:Improved sensorExcellent throttle responseEven faster with its constant output powerLarger capacitors with up to 74% more capacityTurbo timing adjustment up to 32°4-pole rotor for high torqueEasily dismantled motor for maintenance work HW38020348

Thanks to this powerful combo which includes the Quicrun WP1080 G2 ESC and the 540 Quicrun Brushed motor with 30T, the next 1/10 scale crawler adventure will turn into a fantastic experience.The Hobbywing Quicrun WP1080 is with its G2 version one of the first ESCs with a real "Car Mode". This means that the direction of the motor can be switched in real time. This is possible by using the idle channel on the transmitter and thus providing a unique driving experience unlike any seen before. The handbrake force can also be adjusted in real time, which would otherwise have to be changed via external programming as known from other ESCs. Compared to the previous model, the Quicrun WP1080 G2 controller offers different upgrades. For example the BEC not only can be set to 6V and 7.4V - even 8.4V at 6A are now possible. A whopping 15 adjustable parameters and over 90 values also ensure that the ESC can be completely adapted to Your own needs.Crawlers are well equipped with the matching motor, which is made of high-quality materials and has an adjustable timing from -20° up to +20°.Features:Specially designed for 1/10 Rock CrawlersBEC: 4A continuous and up to 6A peak, adjustable to 6V, 7.4V or 8.4VWaterproof according to the IP67 standard15 parameter items for personal ESC settingsPerfectly adjustable drag brakeSeparate programming portSmall, light and yet robustXT60 connector installedGreat efficiency with adjustable timingZero-togging torque designIncl. PCB board to avoid interferenceEasily dismantled for maintenance work HW38020349

Thanks to this powerful combo which includes the Quicrun WP1080 G2 ESC and the 540 Quicrun Brushed motor with 40T, the next 1/10 scale crawler adventure will turn into a fantastic experience.The Hobbywing Quicrun WP1080 is with its G2 version one of the first ESCs with a real "Car Mode". This means that the direction of the motor can be switched in real time. This is possible by using the idle channel on the transmitter and thus providing a unique driving experience unlike any seen before. The handbrake force can also be adjusted in real time, which would otherwise have to be changed via external programming as known from other ESCs. Compared to the previous model, the Quicrun WP1080 G2 controller offers different upgrades. For example the BEC not only can be set to 6V and 7.4V - even 8.4V at 6A are now possible. A whopping 15 adjustable parameters and over 90 values also ensure that the ESC can be completely adapted to Your own needs.Crawlers are well equipped with the matching motor, which is made of high-quality materials and has an adjustable timing from -20° up to +20°.Features:Specially designed for 1/10 Rock CrawlersBEC: 4A continuous and up to 6A peak, adjustable to 6V, 7.4V or 8.4VWaterproof according to the IP67 standard15 parameter items for personal ESC settingsPerfectly adjustable drag brakeSeparate programming portSmall, light and yet robustXT60 connector installedGreat efficiency with adjustable timingZero-togging torque designIncl. PCB board to avoid interferenceEasily dismantled for maintenance workSpecifications:ESCType: BrushedCurrent (cont./peak): 80A/400ACells: 2-3S LiPo / 5-9 cells NiMHBEC: Switch Mode: 6V/7.4V @ 3A, 6A peakBattery Plug: XT60Dimensions: 37.2x31.9x18.4mmWeight: 70.2gWaterproof: YesApplication: 1/10 Rock CrawlerMotorType: BrushedTurns: 40TRPM @ 7.4V: 10 500Input Voltage:

The Ezrun Max10 G2 Combo with its updated 140A ESC combo is here, including several updates and tweaks that make driving 1/10 short courses and trucks even more enjoyable. The ESC comes with a 3665SD motor with 4000kV.In a direct comparison to the regular MAX10 combo, it is clear that the sensor mode and the accompanying waterproof cable have been heavily revised and now ensure great throttle response. The fantastic acceleration with stable output power as well as the nice linearity at low speeds are also among the aspects that have been particularly improved. When it comes to heat development, the MAX10 G2 Combo really outperforms other comparable products. This is partly due to the optimizations in the design and of course also due to the larger capacitors.The perfect introduction to get started right away with a 1/10 car!Features:Improved sensorExcellent throttle responseEven faster with its constant output powerLarger capacitors with up to 74% more capacityTurbo timing adjustment up to 32°4-pole rotor for high torqueEasily dismantled motor for maintenance work HW38020345

The Ezrun Max10 G2 Combo with its updated 80A ESC combo is here, including several updates and tweaks that make driving 1/10 short courses and trucks even more enjoyable. The ESC comes with a 3652SD motor with 3300kV.In a direct comparison to the regular MAX10 combo, it is clear that the sensor mode and the accompanying waterproof cable have been heavily revised and now ensure great throttle response. The fantastic acceleration with stable output power as well as the nice linearity at low speeds are also among the aspects that have been particularly improved. When it comes to heat development, the MAX10 G2 Combo really outperforms other comparable products. This is partly due to the optimizations in the design and of course also due to the larger capacitors.The perfect introduction to get started right away with a 1/10 car!Features:Improved sensorExcellent throttle responseEven faster with its constant output powerLarger capacitors with up to 74% more capacityTurbo timing adjustment up to 32°4-pole rotor for high torqueEasily dismantled motor for maintenance work HW38020346

The Ezrun Max10 G2 Combo with its updated 80A ESC combo is here, including several updates and tweaks that make driving 1/10 short courses and trucks even more enjoyable. The ESC comes with a 3652SD motor with 4100kV.In a direct comparison to the regular MAX10 combo, it is clear that the sensor mode and the accompanying waterproof cable have been heavily revised and now ensure great throttle response. The fantastic acceleration with stable output power as well as the nice linearity at low speeds are also among the aspects that have been particularly improved. When it comes to heat development, the MAX10 G2 Combo really outperforms other comparable products. This is partly due to the optimizations in the design and of course also due to the larger capacitors.The perfect introduction to get started right away with a 1/10 car!Features:Improved sensorExcellent throttle responseEven faster with its constant output powerLarger capacitors with up to 74% more capacityTurbo timing adjustment up to 32°4-pole rotor for high torqueEasily dismantled motor for maintenance work HW38020347

The Ezrun Max10 G2 Combo with its updated 140A ESC combo is here, including several updates and tweaks that make driving 1/10 short courses and trucks even more enjoyable. The ESC comes with a 3665SD motor with 2400kV.In a direct comparison to the regular MAX10 combo, it is clear that the sensor mode and the accompanying waterproof cable have been heavily revised and now ensure great throttle response. The fantastic acceleration with stable output power as well as the nice linearity at low speeds are also among the aspects that have been particularly improved. When it comes to heat development, the MAX10 G2 Combo really outperforms other comparable products. This is partly due to the optimizations in the design and of course also due to the larger capacitors.The perfect introduction to get started right away with a 1/10 car!Features:Improved sensorExcellent throttle responseEven faster with its constant output powerLarger capacitors with up to 74% more capacityTurbo timing adjustment up to 32°4-pole rotor for high torqueEasily dismantled motor for maintenance work HW38020343

The Ezrun Max10 G2 Combo with its updated 140A ESC combo is here, including several updates and tweaks that make driving 1/10 short courses and trucks even more enjoyable. The ESC comes with a 3665SD motor with 3200kV.In a direct comparison to the regular MAX10 combo, it is clear that the sensor mode and the accompanying waterproof cable have been heavily revised and now ensure great throttle response. The fantastic acceleration with stable output power as well as the nice linearity at low speeds are also among the aspects that have been particularly improved. When it comes to heat development, the MAX10 G2 Combo really outperforms other comparable products. This is partly due to the optimizations in the design and of course also due to the larger capacitors.The perfect introduction to get started right away with a 1/10 car!Features:Improved sensorExcellent throttle responseEven faster with its constant output powerLarger capacitors with up to 74% more capacityTurbo timing adjustment up to 32°4-pole rotor for high torqueEasily dismantled motor for maintenance work HW38020344

This combo consisting of the new MAX8 G2 ESC and a matching 2250kV motor is the ideal solution for anyone looking for quick start into the 1/8 scale scene. Perfectly working together, this combo introduces You to performance-oriented on-road action, monster trucks and short course trucks.The MAX8 G2 controller is the next evolutionary step for all 1:8 on-roaders and trucks and is just as famous as its predecessor. Modern demands are optimally met by the dynamic specifications. This includes strong output power as well as excellent low-speed linearity in full-sensored mode. Matching these specs the combo contains a 4278 G2 motor with 2250kV. A very strong solution for all 1/8 off-road and truck models - especially in connection with the matching MAX8 G2 ESC. After all it can increase the speed of this motor by another 25%. Thanks to its durable construction and innovative new design, it simply makes it the heart of the car.FeaturesGreat flexibility & versatilityNew sensor cable for better protection against water and dustVersatile applicationsLow heat generationPlug & Play and almost maintenance-freeReal-time data & data recording possibleESCCurrent (cont./peak): 160A / 1050ANo. of Cells: 3-6S LiPoMotor Limit: 4S LiPo: KV=3000 / 6S LiPo: KV=2400 (4278 Motor)BEC Voltage: 6V / 7.4V / 8.4V with 10A (adjustable)Dimensions: 60x48x40.5mmWeight: 192gApplication: 1/8 On-Road, Short Course Truck and Monster TruckMotorType: Brushless, SensorlessNo. of Cells: 3-6S LiPoPoles: 4RPM: 2250kVOuter Diameter: 42mmLength: 78mmShaft Diameter: 5mmShaft Length: 18.5mmWeight: 455gApplication: 1/8 Truck, Crawler HW38010405

This combo consisting of the new MAX8 G2 ESC and a matching 2500kV motor is the ideal solution for anyone looking for quick start into the 1/8 scale scene. Perfectly working together, this combo introduces You to performance-oriented on-road action, monster trucks and short course trucks.The MAX8 G2 controller is the next evolutionary step for all 1:8 on-roaders and trucks and is just as famous as its predecessor. Modern demands are optimally met by the dynamic specifications. This includes strong output power as well as excellent low-speed linearity in full-sensored mode. Matching these specs the combo contains a 4268 G2 motor with 2500kV. A very strong solution for all 1/8 off-road and truck models - especially in connection with the matching MAX8 G2 ESC. After all it can increase the speed of this motor by another 25%. Thanks to its durable construction and innovative new design, it simply makes it the heart of the car.FeaturesGreat flexibility & versatilityNew sensor cable for better protection against water and dustVersatile applicationsLow heat generationPlug & Play and almost maintenance-freeReal-time data & data recording possibleESCCurrent (cont./peak): 160A / 1050ANo. of Cells: 3-6S LiPoMotor Limit: 4S Lipo: KV=3000 / 6S Lipo: KV=2400 (4278 Motor)BEC Voltage: 6V / 7.4V / 8.4V with 10A (adjustable)Dimensions: 60x48x40.5mmWeight: 192gApplication: 1/8 On-Road, Short Course Truck and Monster TruckMotorType: Brushless, SensorlessNo. of Cells: 3-4S LiPoPoles: 4RPM: 2500kVOuter Diameter: 42mmLength: 68mmShaft Diameter: 5mmShaft Length: 18.5mmWeight: 335gApplication: 1/8 Off-Road, 1/10 Truck, Crawler HW38010404

2in1: Motor and ESC combined as oneThe SE edition of the regular Quicrun Fusion offers a number of improvements and optimizations that have been made to this very special motor/ESC combo in order to continue making crawling as fun and beautiful as possible. Visually, the most striking thing is the design, which is atypical for a fusion combo but is also quite appealing.Of course, space in the car is often very limited and there is little room to properly accommodate the various cables and other electronic items. But the Quicrun Fusion SE is just as big as a typical 550 motor and with a weight of only 201g You simply don't notice that the motor and ESC have been combined here. Thanks to the intelligent torque and speed control, a crawler can easily adapt to any situation. This combo is supported by an excellent waterproof and dustproof casing. So the fun really knows no bounds. Even the electronic switch is protected accordingly. The technology used is called FOC (Field-Oriented-Control) and is responsible for this super control feel. Due to the sinusoidal motor control, the ESC and motor remain cooler and You can achieve a smooth, quiet motor running.Features2in1: Motor and ESC combined as oneWith a length of almost only 58mm, it is now even smaller, more compact and lighter than beforeStrong torque even at slow speedWaterproof and dustproofPowerful built-in BEC with Switch Mode for the voltageVarious safety mechanisms against: undervoltage, overheating, loss of gas, etc.Programmable with the LED programming boxSpecifications:Type: Brushless FOC / SensoredCurrent (continuous): 40ACells: 2s-3s LiPo, 6s-9s NiMHBEC: 6V/7.4V @ 4A (Switch-Mode)Poles: 4kV Raring: 1800kVOuter Diameter: 36mmLength: 58.1mmShaft Diameter: 3.175mmShaft Length: 16.5mmWaterproof: Yes, according to IP-67 StandardProgramming:- compatible with the LED Program Box / - independent programming interface (switch position)Weight: 201gApplication: 1/10 Rock Crawler HW30404317

2in1: Motor and ESC combined as oneThe SE edition of the regular Quicrun Fusion offers a number of improvements and optimizations that have been made to this very special motor/ESC combo in order to continue making crawling as fun and beautiful as possible. Visually, the most striking thing is the design, which is atypical for a fusion combo but is also quite appealing.Of course, space in the car is often very limited and there is little room to properly accommodate the various cables and other electronic items. But the Quicrun Fusion SE is just as big as a typical 550 motor and with a weight of only 201g You simply don't notice that the motor and ESC have been combined here. Thanks to the intelligent torque and speed control, a crawler can easily adapt to any situation. This combo is supported by an excellent waterproof and dustproof casing. So the fun really knows no bounds. Even the electronic switch is protected accordingly. The technology used is called FOC (Field-Oriented-Control) and is responsible for this super control feel. Due to the sinusoidal motor control, the ESC and motor remain cooler and You can achieve a smooth, quiet motor running.Features2in1: Motor and ESC combined as oneWith a length of almost only 58mm, it is now even smaller, more compact and lighter than beforeStrong torque even at slow speedWaterproof and dustproofPowerful built-in BEC with Switch Mode for the voltageVarious safety mechanisms against: undervoltage, overheating, loss of gas, etc.Programmable with the LED programming boxSpecifications:Type: Brushless FOC / SensoredCurrent (continuous): 40ACells: 2s-3s LiPo, 6s-9s NiMHBEC: 6V/7.4V @ 4A (Switch-Mode)Poles: 4kV Raring: 1200kVOuter Diameter: 36mmLength: 58.1mmShaft Diameter: 3.175mmShaft Length: 16.5mmWaterproof: Yes, according to IP-67 StandardProgramming: - compatible with the LED Program Box / - independent programming interface (switch position)Weight: 201gApplication: 1/10 Crawler HW30404318

The QuicRun Fusion Pro is the evolution and improvement of Hobbywing's first ever created 2-in-1 combo, the regular Quicrun Fusion. 1/10 crawlers get a space and weight-saving motor and ESC in one item combined. Now even stronger and better.Space in the car is often very limited and there is only little room to accommodate the various cables properly. But that's finally over now. With a length of only 58mm and thus just as big as a typical motor and with a weight of only 209g You wouldn't notice that motor and controller are combined here. Thanks to the intelligent torque and speed control, a crawler with this combo can easily adapt to any situation. Of course, the Fusion Pro is equipped with an excellent waterproof and dustproof casing. So the fun really knows no bounds. Even the electronic switch is protected accordingly.The technology used here is called FOC (Field-Oriented-Control) and is responsible for this great feeling of control. The performance of this drive has increased by a whopping 8% compared to its predecessor and the power consumption has even been reduced by 30%. This consumes less battery capacity and increases the driving time.Features2in1: Motor and controller combined in oneCompact design ideal for gaining space and reducing weightNoticeable improvement in performanceFOC drive, ideal for crawlers3 operating modes • Normal (Forward, Reverse with brake) • Normal (Forward, Reverse) • Constant Speed (Forward, Reverse)Refined parameter settings as well as 4 new parameters • Max Braking Power • RPM Decrease Rate • Punch • Neutral RangePowerful torque even at slow speedsSuitable for all weather and track conditionsStrong built-in BEC with voltage switching functionVarious safety mechanisms against: undervoltage, overheating, loss of gas, etc.Programmable with the LED programming boxTechnical Specifications:Type:Brushless FOC SensoredCurrent (cont./peak):60A/200ANo. of Cells:2-3S LiPo, 6-9 cells NiMHBEC:6V/7.4V with 6APoles:4RPM:2300kVOuter Diameter:37mmLength:58mmShaft Diameter:3.175mmShaft Length:16mmWaterproof:YesConnection:XT60Programming:- LED Program Box- integrated Programming InterfaceWeight:209gApplication:1/10 Crawler HW30120402

The Spektrum Firma Sensored 2-in-1 System is specifically engineered to be used with 10th scale Crawlers and Scalers. Featuring advanced Field-orientated Control (FOC) and professional drag brake performance and torque control.Key FeaturesPro-level Drag Brake performance and adjustabilityCompact for easy installation in most applicationsReady to install — no soldering requiredIntegrated 40A / 160 A ESCIndustry leading waterproof designKey Benefits2-in-1 ESC Motor Combo: Compact option for detailed scale builds where space is limitedAdvanced Sensored Motor Control: Great for slow speed driving and next level drag brake performanceIndustry Leading Waterproof Design: The Firma 2-in-1 Brushless Crawler Motor/ESC provides industry leading waterproof and dustproof operation for worry-free driving in mud, sand, snow and waterMulti-point Protection:Over-current protectionAutomatic LiPo low-voltage cutoffThermal protectionFailsafe protectionFeaturesPro-level Drag Brake performance and adjustabilityRPM/Throttle Matching enabledFOC (Field-Oriented Control) equippedIntegrated 40-amp ESC (160amp burst)2-3S LiPo/6-9 Cell NiMH input voltage rangeIndustry Leading Waterproof DesignFully programmable with optional Spektrum ESC Programmer Box (not included)Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC and Brushless Motor manufacturerCompact for easy installation in most applicationsReady to install — no soldering requiredAdjustable high-power BEC (6V or 7.4V)Firmware updatable through the Spektrum ESC Programming BoxHigh heat resistant IC3 connectors, backwards compatible with EC3 connectorsLimited 1-year warrantyThe Ultimate Compact Crawler SolutionThe Spektrum Firma Sensored 2-in-1 System is specifically engineered to be used with 10th scale Crawlers and Scalers. Featuring advanced Field-orientated Control (FOC) and professional drag brake performance and torque control, all while being fully waterproof.The compact 2-in-1 design grants builders the ability to reduce clutter and components, giving you the most room for scale accessories and customization. The integrated design makes the size similar to a 550 can size motor, making it a easy drop-in option for most 1/10 scale crawler, scaler and trailer models.Available in a low speed 1400Kv option for extreme slow speed and high angle of attack performance. And a high speed 2300Kv for excellent control for trailers and rock bouncers.Field-oriented ControlThe Spektrum Firma Sensored 2-in-1 System features a high-precision magnetic encoder and rotor position sensor that provides excellent 1 to 1 control feel when driving at any speed and at any angle. Perfectly suited for trail driving, rock crawling competitions and rock racing setups. This advancement in sensored motor control allows the ESC to match your throttle input to the motors RPM with unmatched precision.Intelligent Speed And Torque ControlThe Spektrum Firma Sensored 2-in-1 System provides a closed loop control, ensuring that the esc maintains torque and RPM levels even as driving conditions change. Giving unprecedented control when driving uphill or downhill and even when in wet or loose traction conditions. No matter the terrain, the Spektrum Firma Crawler system keeps you in complete control.Maximum Power Efficiency Provides Longer Battery LifeWhen driving with the Spektrum Firma Sensored 2-in-1 System, drivers are better equipped for the long trails ahead. The Spektrum Firma Sensored 2-in-1 System only uses the power it needs to match your desired throttle output, providing substantially more efficient current levels and extremely long battery life when compared with similar sensorless systems.Pro-Level Drag Brake AdjustmentThe Spektrum Firma Sensored 2-in-1 System features a huge range of drag brake adjustability, allowing for drivers to expertly tune their crawlers and scalers depending on their driven train and vehicle weight. Allowing up to 200% drag power, no matter the setup, the Spektrum Firma Sensored 2-in-1 System can keep your vehicle parked at nearly any incline.WaterproofThe all-weather, waterproof design of Spektrum™ Firma™ ESCs allows them to perform in nearly any terrain under almost any conditions. Firma ESCs keep you going through dust, gravel, snow, and water.High-adjustability Programming Options High-adjustability Programming OptionsUsing the Spektrum ESC Programming Box (version V2 required) , you can easily change settings on the trail to suit driving conditions. An easy-to-use Smart Link USB Updating and PC Programmer app is also available. SPMXSEM1040B

The Spektrum Firma Sensored 2-in-1 System is specifically engineered to be used with 10th scale Crawlers and Scalers. Featuring advanced Field-orientated Control (FOC) and professional drag brake performance and torque control.Key FeaturesPro-level Drag Brake performance and adjustabilityCompact for easy installation in most applicationsReady to install — no soldering requiredIntegrated 40A / 160A ESCIndustry leading waterproof designKey Benefits2-in-1 ESC Motor Combo: Compact option for detailed scale builds where space is limitedAdvanced Sensored Motor Control: Great for slow speed driving and next level drag brake performanceIndustry Leading Waterproof Design: The Firma 2-in-1 Brushless Crawler Motor/ESC provides industry leading waterproof and dustproof operation for worry-free driving in mud, sand, snow and waterMulti-point Protection:Over-current protectionAutomatic LiPo low-voltage cutoffThermal protectionFailsafe protectionFeaturesPro-level Drag Brake performance and adjustabilityRPM/Throttle Matching enabledFOC (Field-Oriented Control) equippedIntegrated 40-amp ESC (160amp burst)2-3S LiPo/6-9 Cell NiMH input voltage rangeIndustry Leading Waterproof DesignFully programmable with optional Spektrum ESC Programmer Box (not included)Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC and Brushless Motor manufacturerCompact for easy installation in most applicationsReady to install — no soldering requiredAdjustable high-power BEC (6V or 7.4V)Firmware updatable through the Spektrum ESC Programming BoxHigh heat resistant IC3 connectors, backwards compatible with EC3 connectorsLimited 1-year warrantyThe Ultimate Compact Crawler SolutionThe Spektrum Firma Sensored 2-in-1 System is specifically engineered to be used with 10th scale Crawlers and Scalers. Featuring advanced Field-orientated Control (FOC) and professional drag brake performance and torque control, all while being fully waterproof.The compact 2-in-1 design grants builders the ability to reduce clutter and components, giving you the most room for scale accessories and customization. The integrated design makes the size similar to a 550 can size motor, making it a easy drop-in option for most 1/10 scale crawler, scaler and trailer models.Available in a low speed 1400Kv option for extreme slow speed and high angle of attack performance. And a high speed 2300Kv for excellent control for trailers and rock bouncers.Field-oriented ControlThe Spektrum Firma Sensored 2-in-1 System features a high-precision magnetic encoder and rotor position sensor that provides excellent 1 to 1 control feel when driving at any speed and at any angle. Perfectly suited for trail driving, rock crawling competitions and rock racing setups. This advancement in sensored motor control allows the ESC to match your throttle input to the motors RPM with unmatched precision.Intelligent Speed And Torque ControlThe Spektrum Firma Sensored 2-in-1 System provides a closed loop control, ensuring that the esc maintains torque and RPM levels even as driving conditions change. Giving unprecedented control when driving uphill or downhill and even when in wet or loose traction conditions. No matter the terrain, the Spektrum Firma Crawler system keeps you in complete control.Maximum Power Efficiency Provides Longer Battery LifeWhen driving with the Spektrum Firma Sensored 2-in-1 System, drivers are better equipped for the long trails ahead. The Spektrum Firma Sensored 2-in-1 System only uses the power it needs to match your desired throttle output, providing substantially more efficient current levels and extremely long battery life when compared with similar sensorless systems.Pro-Level Drag Brake AdjustmentThe Spektrum Firma Sensored 2-in-1 System features a huge range of drag brake adjustability, allowing for drivers to expertly tune their crawlers and scalers depending on their driven train and vehicle weight. Allowing up to 200% drag power, no matter the setup, the Spektrum Firma Sensored 2-in-1 System can keep your vehicle parked at nearly any incline.WaterproofThe all-weather, waterproof design of Spektrum™ Firma™ ESCs allows them to perform in nearly any terrain under almost any conditions. Firma ESCs keep you going through dust, gravel, snow, and water.High-adjustability Programming OptionsUsing the Spektrum ESC Programming Box (version V2 required) , you can easily change settings on the trail to suit driving conditions. An easy-to-use Smart Link USB Updating and PC Programmer app is also available. SPMXSEM1040A

The Ezrun Series are sensorless brushless power systems for high-end entertainment. They are for satisfying drivers desire for great power, and for providing powerful power solutions to intermediate/high-end RTR vehicles ranges from 1/18th scale to 1/5th scale.The Set contain:Ezrun MAX5 ESC 200A 3-8s suitable for 1/5Ezrun SL 56113 Motor 800kV suitable for 1/5Features:Applicable to All Weather ConditionsOutstanding waterproof and dust-proof capability makes the ESC applicable to all weather conditions, no matter the track is covered with dust, gravel, snow or puddles.Advanced and Secure Electronic SwitchThe electronic switch with the lifespan of over 50000 times of switching on & off features a completely waterproof, dust-proof and shock-resistant design, completely solved problems like stuck reed and rust contact points caused by dust and moisture, switching off automatically caused by violent dash (like landing after flying over slopes) conventional mechanical switches often have. Super Built-in BECThe MAX5 has adopted the worlds 1st HV built-in BEC with the max. output current of up to 25A and switchable output voltage (6V/7.2V). The high voltage BEC is designed to handle today's high voltage servos on demand used by many large scale or 1/8 vehicles.Plug and PlayStandard 6.5mm gold-plated connectors at the ESCs output end are perfectly compatible with stock motor connectors of many popular brushless engines. Moreover, TRAXXAS style plug has been soldered to the ESCs input end for different battery connectors, driver can plug and play and free from possible re-soldering work.Wide ApplicabilityThe EZRUN MAX5 provides the ultimate power upgrade solution for many popular 1/5 scale vehicles like HPI Baja buggy, Losi 5T Nitro-to-electric truck, and Desert Buggy XL Nitro-to-electric buggy. It's also suitable for various other brands of 1/5 scale on-road cars, buggies, truggies or SCT.Maintenance FreeThe ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.Specifications ESC:Current Cont./Peak:200A/1300ACellsLiPo: 3-8SNiMH: 9-24SBEC:6-7.4V (adjustable)Dimensions:93.35x58.12x47.81mmWeight:342gApplication:1/5 Touring Car, Buggy, Truggy, TruckSpecifications Motor:Type:SensorlessPoles:4RPM/Volt800kVOuter Diameter:56mmLength:113mmShaft Diameter:8mmApplication:1/5 with 3-8S LiPo HW38010600

HW38020319

HW38020321

HW38020320

A combination of the JUSTOCK 3650SD G2.1 motor and the XR10 JUSTOCK G3 ESC, this combo is perfectly matched for the ambitious stock or races. The XR10 JUSTOCK G3 ESC was specially developed for races and training drives. The brand new "RPM Limit" programming option ensures that the limit can be adjusted depending on the racing requirements - from 12.500RPM up to 25.000RPM as well as unlimited. In addition, there is the well-known fixed 0-Timing, which is often required in races. So get ready for a fair and successful race.Thanks to new programming options compared to its predecessor, it is now also possible to determine the direction of rotation of the motor as well as to set the BEC voltage to a certain value.Features (ESC)Perfect for competition thanks to RPM limits and 0 timingDirection of motor rotation free choosable (CW or CCW)Adjustable BEC voltage (6V or 7,4V)Robust aluminum housing for ideal heat dissipationBuilt-in capacitors as a space-saving solution compared to external capacitorsVarious protective functions against polarity reversal, overheating, Fail-safe and moreNumerous possibilities for programming (LED / LCD programming, WiFi / OTA module, ...)Firmware upgrades possible to always be up to dateFeatures (Motor)Heat-resistant magnet and double insulated windingsPrecision bearingsCool look and good heat-dissipationLinear and smooth controlRe-buildable designTechnical Specifications (ESC)Type: Brushless, SensoredPower cont./peak 60A / 380AInput Voltage: 2S LipoBEC: 6V / 7.4V @ 4AMotor Types: Brushless Motors (sensored and sensorless)Motor Limit: >=10.5T 3650 MotorFan: Yes, Input via BECProgramming: SET-Button, LED Programming Box, LCD Programming Box, Wifi Module, OTA Module, separate Programming PortDimensions: 40.9x33.9x32.1mmWeight: 75.4gApplication: 1/10, 1/12 On-Road and Off-Road Competition and Training (e.g. Touringcar, Buggy)Technical Specifications (Motor)Typ: Brushless / SensorPole: 2KV Rating: 1600KVWindings: 25.5TLiPo Cells: 2-3sNo load Cutrrent: 2.8AOuter Diameter: 35.9mmLength: 52.5mmShaft Diameter: 3.17mmWeight: 173gTiming: FixedApplications: 1/10, 1/12 Crawler and F1 (Stock Class) HW38020323

A combination of the JUSTOCK 3650SD G2.1 motor and the XR10 JUSTOCK G3 ESC, this combo is perfectly matched for the ambitious stock or races. The XR10 JUSTOCK G3 ESC was specially developed for races and training drives. The brand new "RPM Limit" programming option ensures that the limit can be adjusted depending on the racing requirements - from 12.500RPM up to 25.000RPM as well as unlimited. In addition, there is the well-known fixed 0-Timing, which is often required in races. So get ready for a fair and successful race.Thanks to new programming options compared to its predecessor, it is now also possible to determine the direction of rotation of the motor as well as to set the BEC voltage to a certain value.Features (ESC)Perfect for competition thanks to RPM limits and 0 timingDirection of motor rotation free choosable (CW or CCW)Adjustable BEC voltage (6V or 7,4V)Robust aluminum housing for ideal heat dissipationBuilt-in capacitors as a space-saving solution compared to external capacitorsVarious protective functions against polarity reversal, overheating, Fail-safe and moreNumerous possibilities for programming (LED / LCD programming, WiFi / OTA module, ...)Firmware upgrades possible to always be up to dateFeatures (Motor)Heat-resistant magnet and double insulated windingsPrecision bearingsCool look and good heat-dissipationLinear and smooth controlRe-buildable designTechnical Specifications (ESC)Type:Brushless, SensoredPower cont./peak60A / 380AInput Voltage:2S LipoBEC:6V / 7.4V @ 4AMotor Types:Brushless Motors (sensored and sensorless)Motor Limit:>=10.5T 3650 MotorFan:Yes, Input via BECProgramming:SET-Button, LED Programming Box, LCD Programming Box, Wifi Module, OTA Module, separate Programming PortDimensions:40.9x33.9x32.1mmWeight:75.4gApplication:1/10, 1/12 On-Road and Off-Road Competition and Training (e.g. Touringcar, Buggy)Technical Specifications (Motor)Typ: Brushless / SensorPole: 2KV Rating: 2050KVWindings: 21.5TLiPo Cells: 2-3sNo load Cutrrent: 3.0AOuter Diameter: 35.9mmLength: 52.5mmShaft Diameter: 3.17mmWeight: 175gTiming: FixedApplications: 1/10, 1/12 Crawler and F1 (Stock Class) HW38020322

Intelligent torque and speed control for precise driving manoeuvres with your 1/10 Rock Crawler!The XeRun AXE "R2" brushless controller in conjunction with the corresponding AXE "R2" motor automatically controls torque and speed according to load requirements. This technology is also called FOC (Field-Oriented-Control) and is responsible for this really great control feeling.The XeRun AXE "R2" 540 motor with 3.175mm shaft and 2800KV also contributes to this. Built in Hobbywing's patented Staggered Pole Rotor Design, the 4-pole motor has hardly any detent torque and runs smoothly under all conditions. With the professional handbrake function your vehicle is now 100% immobile even on the steepest slopes. In addition, the waterproof sensor port provides special protection and has an even more functional design than its predecessor.For the professional, the controller also offers extensive adjustment options. Connected via Bluetooth and APP, relevant data can be read out, settings can be changed or firmware updates can be carried out, all simply and easily.Technical data controller:Type: Brushless FOCCurrent continuous/short: 80A/480ACell count: 2s-3s LiPo, 6-9 cells NiMHMotor Limits: only XeRun-AXE "R2" motor seriesBEC: 6V/7.4V with 6AProgramming: via Bluetooth and APP "HW LINKWaterproof: YesDimensions: 47,4 x 36,2 x 26,5mmweight: 108gInsert: 1/10th of a Rock CrawlerTechnical data motor:Type: Sensored Brushless FOCPoles: 4Speed: 2800KVNumber of LiPo cells: 2s-3sNo-load current: 3.6Aouter diameter: 36,0mmlength: 57,8mmshaft diameter: 3,175mmwavelength: 16mmWaterproof: Yesweight: 213gInsert: 1/10th of a Rock Crawler HW38020313

Product information "Hobbywing Xerun Axe540L R2-2100kV FOC Combo for Rock CrawlersIntelligent torque and speed control for precise driving manoeuvres with your 1/10 Rock Crawler!The XeRun AXE "R2" brushless controller in conjunction with the corresponding AXE "R2" motor automatically controls torque and speed according to load requirements. This technology is also called FOC (Field-Oriented-Control) and is responsible for this really great control feeling.The XeRun AXE "R2" 540 motor with 3.175mm shaft and 2100KV also contributes to this. Built in Hobbywing's patented Staggered Pole Rotor Design, the 4-pole motor has hardly any detent torque and runs smoothly under all conditions. With the professional handbrake function your vehicle is now 100% immobile even on the steepest slopes. In addition, the waterproof sensor port provides special protection and has an even more functional design than its predecessor.For the professional, the controller also offers extensive adjustment options. Connected via Bluetooth and APP, relevant data can be read out, settings can be changed or firmware updates can be carried out, all simply and easily.Technical data controller:Type: Brushless FOCCurrent continuous/short: 80A/480ACell count: 2s-3s LiPo, 6-9 cells NiMHMotor Limits: only XeRun-AXE "R2" motor seriesBEC: 6V/7.4V with 6AProgramming: via Bluetooth and APP "HW LINKWaterproof: YesDimensions: 47,4 x 36,2 x 26,5mmweight: 108gInsert: 1/10th of a Rock CrawlerTechnical data motor:Type: Sensored Brushless FOCPoles: 4Speed: 2100KVNumber of LiPo cells: 2s-3sNo-load current: 2.7Aouter diameter: 36,0mmlength: 57,8mmshaft diameter: 3,175mmwavelength: 16mmWaterproof: Yesweight: 212gInsert: 1/10th of a Rock Crawler HW38020312

Intelligent torque and speed control for precise driving manoeuvres with your 1/10 Rock Crawler!The XeRun AXE "R2" brushless controller in conjunction with the corresponding AXE "R2" motor automatically controls torque and speed according to load requirements. This technology is also called FOC (Field-Oriented-Control) and is responsible for this really great control feeling.The XeRun AXE "R2" 540 motor with 3.175mm shaft and 1400KV also contributes to this. Built in Hobbywing's patented Staggered Pole Rotor Design, the 4-pole motor has hardly any detent torque and runs smoothly under all conditions. With the professional handbrake function your vehicle is now 100% immobile even on the steepest slopes. In addition, the waterproof sensor port provides special protection and has an even more functional design than its predecessor.For the professional, the controller also offers extensive adjustment options. Connected via Bluetooth and APP, relevant data can be read out, settings can be changed or firmware updates can be carried out, all simply and easily.Technical data controller:Type: Brushless FOCCurrent continuous/short: 80A/480ACell count: 2s-3s LiPo, 6-9 cells NiMHMotor Limits: only XeRun-AXE "R2" motor seriesBEC: 6V/7.4V with 6AProgramming: via Bluetooth and APP "HW LINKWaterproof: YesDimensions: 47,4 x 36,2 x 26,5mmweight: 108gInsert: 1/10th of a Rock CrawlerTechnical data motor:Type: Sensored Brushless FOCPoles: 4Speed: 1400KVNumber of LiPo cells: 2s-3sNo-load current: 1.7Aouter diameter: 36,0mmlength: 57,8mmshaft diameter: 3,175mmwavelength: 16mmWaterproof: Yesweight: 211gInsert: 1/10th of a Rock Crawler HW38020311

Intelligent torque and speed control for precise driving manoeuvres with your 1/10 Rock Crawler!The XeRun AXE "R2" brushless controller in conjunction with the corresponding AXE "R2" motor automatically controls torque and speed according to load requirements. This technology is also called FOC (Field-Oriented-Control) and is responsible for this really great control feeling.The XeRun AXE "R2" 550 motor with 5mm shaft and 3300KV also contributes to this. Built in Hobbywing's patented Staggered Pole Rotor Design, the 4-pole motor has hardly any detent torque and runs smoothly under all conditions. With the professional handbrake function your vehicle is now 100% immobile even on the steepest slopes. In addition, the waterproof sensor port provides special protection and has an even more functional design than its predecessor.For the professional, the controller also offers extensive adjustment options. Connected via Bluetooth and APP, relevant data can be read out, settings can be changed or firmware updates can be carried out, all simply and easily.

Controller Combo for 1/8 scale trucksThe Ezrun series offers numerous sensorless brushless systems for ambitious hobby racers and those who want to become one. They are the perfect choice when it comes to replacing your RTR equipment with high quality electronics with a lot of entertainment value.The Max8 is the perfect choice for 1/8th scale monster trucks that want more power. Suitable for up to 6S lipos it can get the most out of all sensorless motors. The extremely powerful BEC provides more than enough power for the receiver as well as the servos. The electric switch is extremely robust and reliable, and thanks to the special cooling system the controller always runs in an optimal temperature range.The set consists of the following components:- Controller Ezrun MAX8 V3 150A BEC 6A 3-6s WP with XT90 connector for 1/8- Electric motor Ezrun 4268 Lite SL 2600kV Sensorless for 1/8- Hobbywing LED programming card (HW30501003)Features:Great flexibility & versatility: The controller has a very high & stable output power, so the models can do a lot of moves without any problems. Whether it's an aggressive start or wheelie, a 720 degree flip or a killer jump, even high speed tests are easily mastered. In addition, the controller can be programmed with a wide range of parameters in order to achieve excellent control of the model and to react as sensitively as possible in the throttle/brake curve.Suitable for all weather conditions: Excellent sealing against water and dust make this controller a weapon in all weather or conditions. No matter if extremely dusty slopes, rain-wet roads, snow, foxes or gravel, with the MAX8 it always goes on.Advanced and safe electronic switch: This electronic switch has a lifetime of more than 50,000 switching operations and is also completely water & dust proof and has a shockproof design. This makes problems like rusty contacts or moisture in the switch a thing of the past. Also it cannot switch itself off after hard landings or accidents like a conventional mechanical switch.Super built-in BEC: The world's first regulator with a built-in Super BEC which can provide a maximum output power of up to 15A. The output voltage is also adjustable between 6V & 7.4V. This allows the use of a wide variety of servos such as high current (HV) servos to maintain maximum control of the model.Plug & Play: Equipped with 6.5mm gold plated sockets as standard, the connectors of most motors such as those from Traxxas or HPI can be plugged directly into the controller. Also on the battery side, the widely used T-connector / Deans is already soldered, so in most cases the tiresome soldering is omitted and the controller can be put into operation immediately.The housing has already some mounting holes to install the controller in Traxxas models.Wide range of applications: This controller is the perfect upgrade choice for most 1/8th monster truck models like Traxxas E-Revo & E-Maxx, HPI Savage or Thunder Tiger E-Mat as well as other 1/8th monster trucks that need a performance boost.Virtually maintenance free: The whole controller except the fan is basically maintenance free. All you need to do is remove the fan cover to replace the fan if necessary. There is no need to open the housing or similar and the whole process can be done quickly and smoothly HW38010402