NEWS

Our High Selection battery cells consist of patented components of electrolytes, which have an excellent performance at low temperatures (with high discharge current even below -10 ?) and higher discharge rates compared to other conventional batteries with a similar density. By adding special nano-tech materials and using automatic / semi-automatic devices during cell processing, we get TPRO battery packs with high energy density, low internal resistance, long service life and high consistency. Meanwhile, a reasonable amount of Li3V2 (PO4) 3 added to the anode of our battery packs can effectively reduce the voltage drop rate in the early stage of the battery discharge procedure and ensure a flat discharge curve during normal use.Such unsurpassed properties make our TPRO battery packs ideal for use in the RC car sector. They are lighter than most Li-Po batteries on the market with the same discharge and capacity; In other words, they offer more capacity and output power than most Li-Po batteries of the same weight on the market!Properties:Ultra high voltage under load, flat discharge curve, excellent performance at low temperature and high rate of discharge. High quality consistency. Powerful, power density. Patented electrolytes and ultrasonic welding ensure low resistance, high reliability and lightweight properties. Longer life compared to most standard batteries on the market TP73003

Die ANSMANN Energy-Akkus sind die Top-Energiespender für alle RC-Anwendungen und viele weitere Einsatzzwecke in Taschenlampen, Fernbedienungen, Fotoapparaten und mobilen Geräten.- sofort einsetzbar, da vorgeladen!- lange benutzbar, da minimale Selbstentladung!- liefern viel Strom, da echte 800 mAh!- 360 Tage outdoor-tauglich, da kälteunempfindlich!- langlebig, da bis zu 1000x wiederaufladbar!Technische DatenSpannung: 1,2 VKapazität: 800 mAhBaugröße: Micro/AAA/LR03 500609040

SpecificationsCapacity = 3700mAhVoltage = 18,5VEnergy (Watt Hours) = 468,5 WhConfiguration = 5S1PContinuous Current max. = 259A (70C)Burst Current max. = 444A (120C)Dimensions (LxWxH) = 142 x 44 x 38Weight with cables = 498gBalance Plug Type = XH LEMONRC LiPo batteries are some of the most popular lithium polymer batteries for R/C. The current 30C/60C series delivers plenty of power for most R/C sports applications. Trust a brand that is famous for quality and longevity since 2004.Extremely low internal resistance for high current loadCompact sizes and premium craftmanshipFeatures XH-type balance plugEspecially developed for R/C modelsportsStrictly selected Top-QualityFresh material from latest production30-Points Quality Check C8472

DESCRIPTIONThis charger can be used to charge special LiPo transmitter batteries which have an integrated balancer (e.g. the MaxPro LiPo TX battery 7.4V 2800mAh with order number 100031MAX2049). Charging is done via the charging socket of the transmitter, suitable only for Futaba FX36Important note: the charger may only be used if the transmitter is operated with a LiPo battery with integrated balancer ! Under no circumstances should it be used with normal LiPo batteries without an integrated balancer, otherwise both the battery and the transmitter may be damaged. Be sure to pay attention to the instructions on the transmitter battery, or if in doubt ask the ACT / Futaba Service Department.TECHNICAL DATA- Input: 100 - 240V 50/60 Hz- Output: 8.4 V / 500mAh 330025011

XT60-TRAXXAS

This WiFi module allows you to change your charger settings all from a convenient APP. Just download the APP from online, connect the Charger to the EOS Wifi Module and you are ready to charge! Never has been controlling or analyzing your charge data been easier, either at the field or home.Details:Charger Compatibility: HP-EOS0840iPhone Compatibility: Android or iOS SmartphonesDefault Password: 12341234 HP-EOSWIFIMOD

Sensor extension cable for system XH with 30cm length! 56484

Sensor extension cable for system XH with 30cm length! 56482

o) Ideal for E-batteries, NO high-current cell*) High-current cell, fast-chargeable, particularly suitable for drive batteries of electric motors1) Standard cell f. univ. utilisation 117313

The Ro-Power LOOP batteries are high-quality, already precharged batteries of the sizes AA and AAA.They are used immediately wherever a high energy demand but also a low self-discharge is expected. So also in remote controls and receiver batteries, but also in all other household electronic devices, like cameras, telephones, TV remote controls, toys, etc.The Ro-Power LOOP batteries are also fast charging, have a high capacity even at low temperatures and are very durable. Even after one year of storage they still have up to 85% of their capacity.Features:-pre-charged NiMH battery (approx. 75%) for immediate use-universal application, also in household appliances-Accu formats AA and AAA-lowest self-discharge (after one year storage still up to 85% capacity)-high load capacity, even at low temperatures -no memory effect, can always be recharged 7388

The new Robbe Ro-Power ULTRA HP and MAXAMP are selected high-performance cells with a novel chemical structure. They have a very low internal resistance and maintain their voltage even under high loads. It goes without saying that the packs are manufactured to the highest quality standards and are manufactured to the highest standards and carefully selected best components. Thus we can also guarantee a very high cycle stability. The discharge currents (C-rates) are deliberately kept very conservative and can therefore be removed permanently.The ULTRA HP series is made with 25(50)C for all standard requirements in the entire RC range.The MAXAMP series has an even higher load capacity of 35(70)C and is used in the high performance range, where higher currents and voltage stability under load are required.The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series. 7315

The new Robbe Ro-Power ULTRA HP and MAXAMP are selected high-performance cells with a novel chemical structure. They have a very low internal resistance and maintain their voltage even under high loads. It goes without saying that the packs are manufactured to the highest quality standards and are manufactured to the highest standards and carefully selected best components. Thus we can also guarantee a very high cycle stability. The discharge currents (C-rates) are deliberately kept very conservative and can therefore be removed permanently.The ULTRA HP series is made with 25(50)C for all standard requirements in the entire RC range.The MAXAMP series has an even higher load capacity of 35(70)C and is used in the high performance range, where higher currents and voltage stability under load are required.The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series. 7309

The new Robbe Ro-Power ULTRA HP and MAXAMP are selected high-performance cells with a novel chemical structure. They have a very low internal resistance and maintain their voltage even under high loads. It goes without saying that the packs are manufactured to the highest quality standards and are manufactured to the highest standards and carefully selected best components. Thus we can also guarantee a very high cycle stability. The discharge currents (C-rates) are deliberately kept very conservative and can therefore be removed permanently.The ULTRA HP series is made with 25(50)C for all standard requirements in the entire RC range.The MAXAMP series has an even higher load capacity of 35(70)C and is used in the high performance range, where higher currents and voltage stability under load are required.The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series. 7304

46218

46207

46206

46211

46202

46201

46093

46067

46066

46064

46061

46054

TRX2950X

4150009

- max. charging current 6A- max. discharge current 35A- Weight / Cell: 104g- 2 pcs / package- 2600mAh Capacity 143538

"WELLPOWER" Lipo batteries with the sensational price, performance ratio! "SE" series = high-quality workmanship + outstanding performance data + best price-performance ratio! Depending on type -100C loadable (peak current) and charging currents of up to 8 times the nominal capacity make our "Wellpower" Lipos the first choice for the ambitious model builder. Balancer plug system "XH". Version "V2" is supplied as standard with a Liposafe specially manufactured according to battery size (from 1000mAh). For maximum safety during transport and storage. The battery and Liposafe can even be installed directly in the model. (Note temperature development!). For price-conscious model builders we offer the "ECO" series especially, with somewhat lower nominal load capacity and without Liposafe, but with the well-known quality features at an unbeatable price. Splitpack´s have two balancer and 4 main power connections. Version "ULTIMA" with real 35C or 60C continuous load and peak between 70C and 90C (1sec.) or 120C (max.0,5sec.) for uncompromising applications like e.g. in competition. "CHECK" version with standard built-in LED voltage indicator for quick test of battery charge status.Discharge currents "SE/V2": The values in brackets are only valid for short-term load! (max. 5 seconds)Charge currents: "CHx" Data indicate the maximum permissible charge current. For CH2, for example, twice the value of the rated capacity (i.e. max. 4A for 2.0Ah battery), CH6 six times the value, etc.Tip: - The max. continuous discharge current is only recommended with active temperature monitoring!- Preheating cold batteries increases performance and service life- Never allow batteries to become hotter than 60°C.- Recommended bearing voltage 3,70... 3,80 V / cell- Protect from short circuit, mechanical damage, overheating, deep discharge and overcharging.- Only charge with a suitable lipolader on a fireproof surface. - Do not continue to use damaged cells !- never charge or discharge unattended ! 2*114484SP 4000 30C(SHORTY)

Ideal for T-Rex 250 and similar applications with higher performance requirements. "WELLPOWER" Lipo batteries with the sensational price, performance ratio! "SE" series = high-quality workmanship + outstanding performance data + best price-performance ratio! Depending on type -100C loadable (peak current) and charging currents of up to 8 times the nominal capacity make our "Wellpower" Lipos the first choice for the ambitious model builder. Balancer plug system "XH". Version "V2" is supplied as standard with a Liposafe specially manufactured according to battery size (from 1000mAh). For maximum safety during transport and storage. The battery and Liposafe can even be installed directly in the model. (Note temperature development!). For price-conscious model builders we offer the "ECO" series especially, with somewhat lower nominal load capacity and without Liposafe, but with the well-known quality features at an unbeatable price. Splitpack´s have two balancer and 4 main power connections. Version "ULTIMA" with real 35C or 60C continuous load and peak between 70C and 90C (1sec.) or 120C (max.0,5sec.) for uncompromising applications like e.g. in competition. "CHECK" version with standard built-in LED voltage indicator for quick test of battery charge status.Discharge currents "SE/V2": The values in brackets are only valid for short-term load! (max. 5 seconds)Charge currents: "CHx" Data indicate the maximum permissible charge current. For CH2, for example, twice the value of the rated capacity (i.e. max. 4A for 2.0Ah battery), CH6 six times the value, etc.Tip: - The max. continuous discharge current is only recommended with active temperature monitoring!- Preheating cold batteries increases performance and service life- Never allow batteries to become hotter than 60°C.- Recommended bearing voltage 3,70... 3,80 V / cell- Protect from short circuit, mechanical damage, overheating, deep discharge and overcharging.- Only charge with a suitable lipolader on a fireproof surface. - Do not continue to use damaged cells !- never charge or discharge unattended ! 3*602568XP-850MAH-45C