According to Wikipedia, in the West of the USA, especially in the 19th century, a wild horse was also called BRONCO. This also fits quite well to this vehicle because you can get ready for a wild ride.The ABSIMA "BronX" is a high-end "Ready-to-Run" crawler in 1:8 scale which is based on the successful ABSIMA CR3.4 chassis. All the features that made its smaller brothers in 1/10th scale (Sherpa, Khamba) so successful have been adopted. Due to the 1:8 chassis, even more extreme maneuvers are possible and due to the size of the body, details could be emphasized even better, which give the vehicle a beautiful driving image.Highlights:Programmable 80A Hobbywing speed controller2-speed transmissionLocking front & rear differentials (independently) Lightning front/rearPortal axes20kg Steering servo with metal gear2-3S* LiPo suitable (Note the dimension of the battery box)+30km/h (in 3S mode)In addition, there is an 80A speed controller from Hobbywing which is fully programmable (optional program box 2110060). In combination with the larger and more powerful 775 motor, the vehicle reaches a top speed of over 30km/h in 3S LiPo operation. Thus, not only the obstacle, but also the way there is the goal.A realistically designed 5mm CNC machined aluminum frame with a heavy-duty aluminum 4-link suspension system.Oil-filled shock absorbers with 5mm piston rods provide a silky smooth and realistic response.Portal AxlesPortal axles not only offer a greater distance from the differential housing to the ground than conventional axles, but they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle jumps over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure smooth running.Steering SystemA unique hydraulic steering shock absorber design combined with a 20kg (actuating force) digital and waterproof steering servo with aluminum servo arm allow a steering angle of up to 43°.Drive System3* 0.9kg mini servos for the 2-speed transmission and the differential locks/unlocks are already installed. All servos are waterproof.The BronX Crawler has a 2-speed manual transmission that lets you overcome difficult terrain and get to the next obstacle quickly. Simply press a button on the remote control and switch from the standard 1/37.1 (low speed) to 1/15.1 (high speed) gear ratio.Lock and unlock the front and rear differentials independently for maximum performance on the track - all controlled remotely with your radio and 2 built-in mini servos. Leave the differential unlocked for smooth handling at high-speed. On technically challenging trails, you can lock the front differential, the rear differential, or even both to handle extreme terrain.An aluminum motor mount and adjustable slipper clutch provide extra protection in extreme conditions. Hardened steel differential gears and drive parts - designed for high loads.ElectronicsThe drive concept - powered by HOBBYWING - includes an 80A (440A peak) waterproof speed controller and a 775 motor. With an optionally available program box, 15 different parameters can be set:Run. Mode / Bat. Type / Initial Start Force / Max. Forward / Max. Reverse / Max Brake / Drag Brake / Drag Brake Rate / Neutral Range / Punch / PWM Frequency / BEC V / FreewheelingThe battery box has the dimension of approx. (L/W/H) 160x48x25mm and is thus designed for 2S or flat 3S LiPo batteries which also corresponds to our recommendation.In 3S LiPo battery operation +30km/h can be reached! Thus, this crawler is probably the fastest off-road vehicle of its kind. ATTENTION: The speed controller is also "4S LiPo" capable which we absolutely do not recommend! The vehicle (gearbox, axles...) is exposed to extreme force transmission in 4S operation. Also, the handling of the crawler deteriorates with increasing speed which can lead to accidents and costly damage (no warranty claim).The 6-channel 2.4 GHz radio system gives you total control over your vehicle - whether it's the light unit, 2-speed transmission, differential locks or setting the top speed. Lightning SystemHead lightsTaillightsTurn signals (for steering movements)Daytime running lightHazard warning lights (front and rear)Brake lightLight bar on the roofMore Scale DetailsStylish 2.2-inch wheelsSuper soft tires with realistic sidewall flex for maximum traction on any rock.12mm aluminum standard hubs fit all standard crawler wheels (Note: portal axles!).Rocksliders and molded inner fenders protect the chassis from dirt and damage.1.2mm PC "flip-top" body with magnetic and screw mountComplete interior Tow hook (front)Rear view mirrorFull size spare wheel Roof rackDoor handlesCar SpecsLength: 668mmWidth: 295mmHeight: 285mmGround clearance: 95mmWheelbase: 380mmWeight: 4430gApproach angle: 50°Departure angle: 55°Steering angle: 43°Wheels: 2.2" Wheels with 12mm Hex-Hub Tires: 50x135mm including foam inlayElectronic SpecsSpeed controller (ESC): Hobbywing 80A brushed/waterproof with T-plug, programmable, BEC 6V@4A, 2S-3S* LiPo suitableMotor: 775 "high torque" brushed motorSteering Servo: 20kg metal gear, digital & waterproof Mini Servos: 0,9kg, waterproofRadio System: 6-channel 2.4GHz radio (4.8 - 12.0V LiPo-suitable) Shock absorber length: 100mmViscosity shock absorber oil: 500cpsTransmission ratio: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote controlled Gears: Modul 0.8/32dp - Pinion 16Z / Main gear 44TDrive system: 4WD 13004

According to Wikipedia, in the West of the USA, especially in the 19th century, a wild horse was also called BRONCO. This also fits quite well to this vehicle because you can get ready for a wild ride.The ABSIMA "BronX" is a high-end "Ready-to-Run" crawler in 1:8 scale which is based on the successful ABSIMA CR3.4 chassis. All the features that made its smaller brothers in 1/10th scale (Sherpa, Khamba) so successful have been adopted. Due to the 1:8 chassis, even more extreme maneuvers are possible and due to the size of the body, details could be emphasized even better, which give the vehicle a beautiful driving image.Highlights:Programmable 80A Hobbywing speed controller2-speed transmissionLocking front & rear differentials (independently) Lightning front/rearPortal axes20kg Steering servo with metal gear2-3S* LiPo suitable (Note the dimension of the battery box)+30km/h (in 3S mode)In addition, there is an 80A speed controller from Hobbywing which is fully programmable (optional program box 2110060). In combination with the larger and more powerful 775 motor, the vehicle reaches a top speed of over 30km/h in 3S LiPo operation. Thus, not only the obstacle, but also the way there is the goal.A realistically designed 5mm CNC machined aluminum frame with a heavy-duty aluminum 4-link suspension system.Oil-filled shock absorbers with 5mm piston rods provide a silky smooth and realistic response.Portal AxlesPortal axles not only offer a greater distance from the differential housing to the ground than conventional axles, but they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle jumps over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure smooth running.Steering SystemA unique hydraulic steering shock absorber design combined with a 20kg (actuating force) digital and waterproof steering servo with aluminum servo arm allow a steering angle of up to 43°.Drive System3* 0.9kg mini servos for the 2-speed transmission and the differential locks/unlocks are already installed. All servos are waterproof.The BronX Crawler has a 2-speed manual transmission that lets you overcome difficult terrain and get to the next obstacle quickly. Simply press a button on the remote control and switch from the standard 1/37.1 (low speed) to 1/15.1 (high speed) gear ratio.Lock and unlock the front and rear differentials independently for maximum performance on the track - all controlled remotely with your radio and 2 built-in mini servos. Leave the differential unlocked for smooth handling at high-speed. On technically challenging trails, you can lock the front differential, the rear differential, or even both to handle extreme terrain.An aluminum motor mount and adjustable slipper clutch provide extra protection in extreme conditions. Hardened steel differential gears and drive parts - designed for high loads.ElectronicsThe drive concept - powered by HOBBYWING - includes an 80A (440A peak) waterproof speed controller and a 775 motor. With an optionally available program box, 15 different parameters can be set:Run. Mode / Bat. Type / Initial Start Force / Max. Forward / Max. Reverse / Max Brake / Drag Brake / Drag Brake Rate / Neutral Range / Punch / PWM Frequency / BEC V / FreewheelingThe battery box has the dimension of approx. (L/W/H) 160x48x25mm and is thus designed for 2S or flat 3S LiPo batteries which also corresponds to our recommendation.In 3S LiPo battery operation +30km/h can be reached! Thus, this crawler is probably the fastest off-road vehicle of its kind. ATTENTION: The speed controller is also "4S LiPo" capable which we absolutely do not recommend! The vehicle (gearbox, axles...) is exposed to extreme force transmission in 4S operation. Also, the handling of the crawler deteriorates with increasing speed which can lead to accidents and costly damage (no warranty claim).The 6-channel 2.4 GHz radio system gives you total control over your vehicle - whether it's the light unit, 2-speed transmission, differential locks or setting the top speed. Lightning SystemHead lightsTaillightsTurn signals (for steering movements)Daytime running lightHazard warning lights (front and rear)Brake lightLight bar on the roofMore Scale DetailsStylish 2.2-inch wheelsSuper soft tires with realistic sidewall flex for maximum traction on any rock.12mm aluminum standard hubs fit all standard crawler wheels (Note: portal axles!).Rocksliders and molded inner fenders protect the chassis from dirt and damage.1.2mm PC "flip-top" body with magnetic and screw mountComplete interior Tow hook (front)Rear view mirrorFull size spare wheel Roof rackDoor handlesCar SpecsLength: 668mmWidth: 295mmHeight: 285mmGround clearance: 95mmWheelbase: 380mmWeight: 4430gApproach angle: 50°Departure angle: 55°Steering angle: 43°Wheels: 2.2" Wheels with 12mm Hex-Hub Tires: 50x135mm including foam inlayElectronic SpecsSpeed controller (ESC): Hobbywing 80A brushed/waterproof with T-plug, programmable, BEC 6V@4A, 2S-3S* LiPo suitableMotor: 775 "high torque" brushed motorSteering Servo: 20kg metal gear, digital & waterproof Mini Servos: 0,9kg, waterproofRadio System: 6-channel 2.4GHz radio (4.8 - 12.0V LiPo-suitable) Shock absorber length: 100mmViscosity shock absorber oil: 500cpsTransmission ratio: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote controlled Gears: Modul 0.8/32dp - Pinion 16Z / Main gear 44TDrive system: 4WD 13005

According to Wikipedia, in the West of the USA, especially in the 19th century, a wild horse was also called BRONCO. This also fits quite well to this vehicle because you can get ready for a wild ride.The ABSIMA "BronX" is a high-end "Ready-to-Run" crawler in 1:8 scale which is based on the successful ABSIMA CR3.4 chassis. All the features that made its smaller brothers in 1/10th scale (Sherpa, Khamba) so successful have been adopted. Due to the 1:8 chassis, even more extreme maneuvers are possible and due to the size of the body, details could be emphasized even better, which give the vehicle a beautiful driving image.Highlights:Programmable 80A Hobbywing speed controller2-speed transmissionLocking front & rear differentials (independently) Lightning front/rearPortal axes20kg Steering servo with metal gear2-3S* LiPo suitable (Note the dimension of the battery box)+30km/h (in 3S mode)In addition, there is an 80A speed controller from Hobbywing which is fully programmable (optional program box 2110060). In combination with the larger and more powerful 775 motor, the vehicle reaches a top speed of over 30km/h in 3S LiPo operation. Thus, not only the obstacle, but also the way there is the goal.A realistically designed 5mm CNC machined aluminum frame with a heavy-duty aluminum 4-link suspension system.Oil-filled shock absorbers with 5mm piston rods provide a silky smooth and realistic response.Portal AxlesPortal axles not only offer a greater distance from the differential housing to the ground than conventional axles, but they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle jumps over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure smooth running.Steering SystemA unique hydraulic steering shock absorber design combined with a 20kg (actuating force) digital and waterproof steering servo with aluminum servo arm allow a steering angle of up to 43°.Drive System3* 0.9kg mini servos for the 2-speed transmission and the differential locks/unlocks are already installed. All servos are waterproof.The BronX Crawler has a 2-speed manual transmission that lets you overcome difficult terrain and get to the next obstacle quickly. Simply press a button on the remote control and switch from the standard 1/37.1 (low speed) to 1/15.1 (high speed) gear ratio.Lock and unlock the front and rear differentials independently for maximum performance on the track - all controlled remotely with your radio and 2 built-in mini servos. Leave the differential unlocked for smooth handling at high-speed. On technically challenging trails, you can lock the front differential, the rear differential, or even both to handle extreme terrain.An aluminum motor mount and adjustable slipper clutch provide extra protection in extreme conditions. Hardened steel differential gears and drive parts - designed for high loads.ElectronicsThe drive concept - powered by HOBBYWING - includes an 80A (440A peak) waterproof speed controller and a 775 motor. With an optionally available program box, 15 different parameters can be set:Run. Mode / Bat. Type / Initial Start Force / Max. Forward / Max. Reverse / Max Brake / Drag Brake / Drag Brake Rate / Neutral Range / Punch / PWM Frequency / BEC V / FreewheelingThe battery box has the dimension of approx. (L/W/H) 160x48x25mm and is thus designed for 2S or flat 3S LiPo batteries which also corresponds to our recommendation.In 3S LiPo battery operation +30km/h can be reached! Thus, this crawler is probably the fastest off-road vehicle of its kind. ATTENTION: The speed controller is also "4S LiPo" capable which we absolutely do not recommend! The vehicle (gearbox, axles...) is exposed to extreme force transmission in 4S operation. Also, the handling of the crawler deteriorates with increasing speed which can lead to accidents and costly damage (no warranty claim).The 6-channel 2.4 GHz radio system gives you total control over your vehicle - whether it's the light unit, 2-speed transmission, differential locks or setting the top speed. Lightning SystemHead lightsTaillightsTurn signals (for steering movements)Daytime running lightHazard warning lights (front and rear)Brake lightLight bar on the roofMore Scale DetailsStylish 2.2-inch wheelsSuper soft tires with realistic sidewall flex for maximum traction on any rock.12mm aluminum standard hubs fit all standard crawler wheels (Note: portal axles!).Rocksliders and molded inner fenders protect the chassis from dirt and damage.1.2mm PC "flip-top" body with magnetic and screw mountComplete interior Tow hook (front)Rear view mirrorFull size spare wheel Roof rackDoor handlesCar SpecsLength: 668mmWidth: 295mmHeight: 285mmGround clearance: 95mmWheelbase: 380mmWeight: 4430gApproach angle: 50°Departure angle: 55°Steering angle: 43°Wheels: 2.2" Wheels with 12mm Hex-Hub Tires: 50x135mm including foam inlayElectronic SpecsSpeed controller (ESC): Hobbywing 80A brushed/waterproof with T-plug, programmable, BEC 6V@4A, 2S-3S* LiPo suitableMotor: 775 "high torque" brushed motorSteering Servo: 20kg metal gear, digital & waterproof Mini Servos: 0,9kg, waterproofRadio System: 6-channel 2.4GHz radio (4.8 - 12.0V LiPo-suitable) Shock absorber length: 100mmViscosity shock absorber oil: 500cpsTransmission ratio: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote controlled Gears: Modul 0.8/32dp - Pinion 16Z / Main gear 44TDrive system: 4WD 13006