NEWS

Aluminum bottle cap for standard "Cola", mineral water, and similar PET bottles. KAG02481B

Weight: 10,2 g KAG02451

KAG0234B

L-connector for tanks with an inner diameter of 3mm. The mounting hole is 7mm. With rubber seals. KAG02468

“ Outer diameter: 28mm. “ Hole for mounting: 14mm. With magnetic holder of the closure plug. KAG0235U

KAG02452

KAG0233B

For all Kavan tanks or tanks with an opening of approximately 16.5mm inside diameter. KAV0032.1

For all Kavan tanks or tanks with an opening of approximately 16.5mm inside diameter. KAV0033.1

677

19

Tank valve special for easy operation when refuelling and an optical upgrading of your model.- Outside-Ø: approx.32 mm- countersunk-Ø: approx.20 mm- Valve-Ø: 4 mm- Height funnel without valve: approx. 17 mm TV-SMOKE

Fuelling valve with two receptacles for 4-cylinder engines with two tanksThe offer consists of an aluminium tank valve with the inscription FUEL engraved with black 2K lacquer. The valve has a screw cap made of brass. The small handle on the lid means that no tools are required for opening. The valve is sealed by an O-ring in the cover. This system has proven itself for many years. Two nipples for internal hose diameters of 4mm are installed in the valve. This valve is used in models with 4-cylinder engines. In these engines, two tanks are used to check more precisely whether both carburetors draw petrol at the same time. With this valve refuelling is easier and you will see your model on.It is fastened with 6 self-tapping screws which are screwed into a cleanly milled plywood bottom plate, so that no loosening due to vibrations is possible. Outer diameter on fuselage Outer:32mmHull diameter:19,5mmdepth in the fuselage: about 28mmOffer consists of:Tank valve with handle capbottom plate6 screws TV2X

Tank valve special for easy operation when refuelling and an optical upgrading of your model.- Outside-Ø: approx.32 mm- countersunk-Ø: approx.20 mm- Valve-Ø: 4 mm- Height funnel without valve: approx. 17 mm TV-FUEL

Tank cap for engine and jet models for installation in the fuselage. The lock is installed in the fuselage with 8 corresponding Phillips wood screws. The cylindrical part that enters the fuselage has a diameter of 19.5 mm and projects 37 mm into the fuselage interior, the round part on the surface has a diameter of 32 mm, the part consists of high-strength aluminum which is not anodized, thus the valve is not sensitive to scratches. The lid itself is made of cleanly turned brass. The lid also has a groove with a rubber O-ring to prevent loosening due to vibrations. A non-return valve for 4 mm PE pipes is installed in the whole unit. The non-return valve is available as a spare part in case of wear. The valve is kerosene and gasoline solid. Two 5 cm long pieces for 4 mm PE cables are supplied. They can also be used as adapters for normal fuel hoses. The difference to the old version is that the blue operating button no longer stands out of the valve. This is covered with a brass lid. As a result, the operating button is no longer visible. The use of high-strength aluminium and the replaceable check valve gives you a very durable product made in Germany. XXX

Tankventil Spezial für eine leichte Bedienung beim tanken und eine optische Aufwertung ihres Modelles.Aussen-Ø: ca.32 mmversenkter-Ø: ca.20 mmVentil-Ø: 4 mmHöhe-Trichter ohne Ventil: ca. 17 mm XX

Idealer Austausch zu den originalen Tankbeschlägen von Sullivan oder Dubro Kraftstofftanks. Für Methanol oder Benzin geeignet. Ansaugrohr weist größeren Durchmesser als die beiden anderen Messingrohre auf. 38478

Complete set, suitable for all KAVAN tanks as well as tanks with an opening of approximately 16.5 mm inner diameter. To convert KAVAN tanks to gasoline or diesel, order no. KAV0032.1 is required. Order No. KAV0033 / Order No. KAV0033.1 is suitable for glow ignition fuel, not for gasoline. KAV0033

ACC/19048/000

005-00202

Speziell für Grossmodelle mit größerem Innendurchmesser von 3mm! 240009

Speziell für Grossmodelle mit größerem Innendurchmesser von 3mm! 240007

Speziell für Grossmodelle mit größerem Innendurchmesser von 3mm! 240005

232500

Complete set, suitable for all KAVAN tanks as well as tanks with an opening of approximately 16.5 mm inner diameter. To convert KAVAN tanks to gasoline or diesel, order no. KAV0032.1 is required. Order No. KAV0033 / Order No. KAV0033.1 is suitable for glow ignition fuel, not for gasoline. KAV0032

MPJ 4151 BR

Der saubere und sichere Weg zum Auftanken Ihres Kraftstofftanks ohne Abnahme der Benzinleitung vom Vergaser. Für Methanol Motoren! MPJ 4040

Durch Austausch des Gummipfropfens (schwarz) kann jeder DU-Bro Tank zu einem benzinfesten Tank umgebaut werden! Hinweis: Die Kraftstoffleitungen müssen benzinfest sein! 400

MPJ 4150 BR

MPJ 4003 BR