Filter
–
–
–
–
–
-46%
CARSON 1: RC Tractor JCB 2,4Ghz 100% RTR + tanker
€69.99*
€130.00*
(46.16% saved)
Product no.:
9799397
Manufacturer no.:
590907653
Yellow RC agricultural machine!The RC tractor with a license from the British manufacturer JCB scores with extensive equipment and numerous functions, which are controlled by the included 2.4 GHz transmitter. In addition to LED headlights and a horn, the tractor has a 1:16 scale sound module for realistic driving noise. The tractor demonstrates all functions via the demo function. Apart from the easy handling, the yellow tractor is particularly impressive with its enormous driving performance: The efficient NiMH battery ensures an extra long driving time of 30 minutes. If the tractor alone is not enough, you should take a closer look at our JCB tractor with trailer (500907654) Buy - Shop - Action!ATTENTION!Please keep these notes for possible correspondence, subject to colour and technical changes. Not suitable for children under three years of age, there is a risk of suffocation due to swallowable small parts! Use under the direct supervision of adults.Adult assistance is required to remove the transport locks.Product detailsLED headlight with flashing functionSound module for realistic driving noiseHorn controllable via transmitterDemo functionInterference-free 2.4GHz remote control systemOff-road capability through locked rear axleTechnical data:Length 340 mmWidth 165 mmHeight 200 mmWeight 837 gTravel time 30 minSuitable replacement battery 500608248 590907653
-29%
RC4WD SLEDGE HAMMER HEAVY HAUL 6X6 1/14 OFF-ROAD HYDRAULIC DUMPER
€1,999.99*
€2,834.00*
(29.43% saved)
Product no.:
9792228
Manufacturer no.:
RC4VVJD00060
Specifications:Hard Plastic European Style Front CabFull Metal 2 Speed Transmission (Planetary Gears)Transfer Case (Billet Aluminum)Scale Fuel Tank (Billet Aluminum)Super Scaled Leaf Spring Suspension SetupScale Rims (Billet Aluminum)Remote Lockable Rear Axle (Locking Differential)Full Metal Front and Rear Axle HousingSteel Scale Drive ShaftRealistic Front Cab LatchRetractable Steel LadderMolded Functional Fuel TankFully Controllable Truck BedAutomatic Trailer Gate (Do Not Attempt to Open by Hand)Rear Light Guard (Protects Against Rocks)Scale Light Buckets (Fits 3-5mm LED)Recommended Payload: 15kg / 33lbsMaximum Load: 25kg / 55lbsLiPo CutoffFully PaintedScale Wheel/TireCylinder Maximum Thrust: 109kg / 231lbsBrushed Driven Motor300KV Brushless Motor-Driven Micro Hydraulic PumpLength: 26.5in / 674mmWidth: 8.93in / 227mmHeight: 10.7in / 273mm (Including Antenna)Weight: 10kg / 22lbsAxle Gear Ratio: 2.6:1Transfer Case Gear Ratio: 1:1First Gear 1:64, Second Gear 1:16 (Transmission)Basic 6 Channel 2.4Ghz Radio RC4VVJD00060
-41%
DRIVE & FLY MODELS Bruggy BL brushless 1/10XL RTR
€209.00*
€354.95*
(41.12% saved)
Product no.:
9787608
Manufacturer no.:
3173
Strong,Stronger, XL-Line!Consistently further thought ... for everyone who could not decide between a lively buggy and an extremely all-terrain truck, we now have the solution.The new TW-1 Truggy. The mixture of buggy and truck is characterized by its sprightliness and a very stable road holding as well as off-road capability.The wheelbase is the same as the 1/10XL models, but the track has been widened a bit.1:10XL Line - These models are designed for everyone who is not satisfied with just stability. As XL already indicates, this is not a pure 1/10th scale model, rather high quality parts from 1/8th scale models have been used to ensure maximum strength. The additional 2.5mm aluminum chassis in df Models Orange in combination with its matching upper deck is almost indestructible. Additional aluminum steering knuckles, aluminum parts dampers, adjustable camber/track, and many other innovations are the result of years of further development of this model series.And the integrated, waterproof motor-controller system, the encapsulated gearbox together with the strong 9kg steering servo with metal gearbox make these models unbeatable!You want to heat at full throttle over unpaved terrain? You want to jump? With the XL-Line all this is no problem, the 3421kv brushless motor accelerates the model to about 60 km/h, with 3S LiPo operation over 70 km/h are possible! 3173
-19%
SWORKZ S35-GT2 1/8 Pro Nitro GT Kit 4WD Verbrenner Chassis Bausatz
€599.99*
€739.00*
(18.81% saved)
Product no.:
9780786
Manufacturer no.:
SW910037
What a remarkable date January the 18th 2020 was. SWORKz won its first World championship. And not just one title, no, but two titles. SWORKz Factory Team driver Jörn Neumann won the GT World Championship with his SWORKz S35-GT in the Nitro category and his SWORKz S35-GTE in Electric.Based on the world champion winning car S35-GT platform, SWORKz further developed their nitro GT and came out with the S35-GT2. The S35-GT2 is designed for pure On-road racing. It has a unique brand new design front and rear suspension system. The new front Ackerman steering system now comes direct from the 1/8th S35-4 nitro Buggy.Updated from S35-GT and a recalculated new center 2 speed ratio transmission system gives plenty of improvements to the S35-GT2. The S35-GT2 features a T7075 hard anodized and lightened aluminum wide layout chassis that was tested for a long time by our factory pilots to guarantee the best performance. The new S35-GT2 comes with a lower shock layout for the front and rear. The latest steering geometry, with new Ackerman and steering plates, gives the driver very accurate feedback and control over the S35-GT2. The new development in the SWORKz S35-GT2 is a totally new rear hub system. Composite material combined with Carbon plates gives you the possibility for various setups.The newly developed Composite material works perfectly together with the HET differentials to provide maximum traction and control. here are many more small changes and smart ideas put into your new SWORKz S35-GT2, that make the car a real winner.FeaturesNew T7075 Hard Anodized, Lightened Aluminum ChassisNew F/R Shock TowersNew Shock CapsNew 3mm Updated Rear Shock StudsNew Ackerman PlateNew Steering SystemNew Servo Saver Aluminum PartNew Servo Saver Fixable NutNew Servo Saver PlateNew Servo Saver Post Locking DesignNew Steering BallsNew Steering Knuckle PlatesNew Updated Toe In Plates with Square InsertsNew Lower Front and Rear ArmsNew Front Upper ArmsNew Composite Rear Hubs with Carbon PlatesNew Multi Adjustable Ball System for Rear Upper ArmsNew Anti-clock Screws for ShocksFront/Rear HET Differentials IncludedNew center 2 speed on-road transmission gear ration system2 Front Chassis Braces IncludedMore Balance Weight PositionsStronger Down stop AreaOptimized Composite Material Aluminum Parts in T7075 SW910037
-38%
TAMIYA DARK IMPACT EP 4WD 1/10 DF-03 Buggy
€159.99*
€260.00*
(38.47% saved)
Product no.:
61704
Manufacturer no.:
300158370
This 1/10 scale 4WD buggy is specially designed to excel in off-road buggy racing. It features a mid-rear mounted motor and longitundinally mounted battery for optimum balance for jumping. Battery is inserted through the bottom of the chassis, eliminating need to remove body, which makes routine maintenance easy and quick. High performance shaft drive 4WD combines with suspension system featuring extra long suspension arms for improved stability and off-road handling.High performance 1/10 4WD buggy chassis designed for offroad racing4-wheel independent double wishbone suspension featuresCVA oil dampers and extra long suspension arms for improved stability and handlingIncludes sealed diff gearbox indispensable for off-road runningFeatures full ball bearingsElectronic Speed Controller (Not Included)Includes 540 type motorNewly designed off-road tires and wheels featured larger diameter and width, and new tread pattern designed for excellent running and control on hard dirt tracksTires: High Density Spike Tires K (4WD/Front, 62/25), HighDensity Spike Tires K (Rear, 62/35)Wheels: Large Dish Wheels (4WD/Front, 62/25), Large DishWheels (Rear 62/35) 2.94 internal gear ratio. 300158370
-29%
TAMIYA SCANIA R620 6X4 1/14 CONSTRUCTION KIT blue prepainted
€349.99*
€495.00*
(29.29% saved)
Product no.:
95992
Manufacturer no.:
300056327
The TAMIYA Scania R620 in the Blue Edition is a truly impressive tractor, as it is often seen on Europe's roads. The cab is already pre-painted in blue (TS-51 Racing Blue) and covered with clear lacquer. The over 50 cm long and around 3 kg heavy replica of the Scania R620 allows impressive teams to be put together. Under the forward tilting cab is the well-proven Tamiya truck technology. A type 540 electric motor transfers its power to the two rear axles via a shiftable 3-speed gearbox. A robust aluminium ladder frame gives the RC model the required stability. The Scania R620 Blue Edition can be coupled to numerous TAMIYA and CARSON-MODEL SPORT trailers thanks to its high weight and semi-trailer plate.Features:true to original 2-axle drive Polystyrene cab Cab tiltable (forward) aerodynamic package authentic interior Aluminium ladder frame with plastic reinforcements Rear axle with metal bevel gears metal bevel gear differential 3-speed manual gearbox semi-trailer plate (suitable for all Tamiya and Carson trailers) Leaf spring packages with shock absorbers on front and rear axle aluminium front axle Aluminium drive shafts Electric motor type 540 300056327
-35%
TAMIYA FORMULA E GEN2 CH.LIV. TC01 1/10 4WD EP KIT
€199.99*
€310.00*
(35.49% saved)
Product no.:
9777629
Manufacturer no.:
300058681
In recent years, Formula E has established itself more and more as a global racing series and finally also received the status of an official world championship from the FIA. The series uses exclusively electric vehicles and it was therefore obvious that TAMIYA, as the world's leading manufacturer of RC electric models, would also offer them as models. The Fomula E vehicle is a replica of the GEN 2 models in the original sponsor design.The chassis has been redesigned by TAMIYA to meet the requirements for an ultra-flat design. The TC-01 chassis has four-wheel drive and can be used with both Formula E bodies and normal touring car bodies (257 mm wheelbase). It is driven by cardan drive and oil-filled differentials. Highlight is the new axle geometry with horizontal oil-filled shock absorbers and push rods - known from real formula racing.Technical details:Kit model in scale 1/10length: 430 mm, width: 188 mm, height: 99 mmHighly detailed polycarbonate body that faithfully replicates the ultra-flat shape of Gen Formula E cars. Rear spoiler and side panels made of separate polycarbonate attachments.Halo safety bar and rearview mirror on white ABS plasticincl. extensive sticker sheet with the original sponsorsTAMIYA TC-01 chassis in ultra-flat design with 4WD driveBoth Formula E bodies and standard touring car bodies can be used on the chassis.wheelbase: 257 mmChassis in hybrid construction, consisting of a monocoque and an upper frame - known from the TA-07 chassis. Thereby very torsion resistant and many setup possibilitiesNew inboard suspension system front and rear with horizontal dampers and identical wishbones for identical leverage front and rear.Control of the oil-pressure shock absorbers via push rods and rocker armsAdjustable track, camber and casterRammer and body holder can be changed from Formula E to touring cars4WD drive via cardan shaft (known from TB-05) with oil filled differentialsCompatible with IFMAR homologated battery packsnumerous tuning parts available 300058681
-38%
DRIVE & FLY MODELS FIGHTER TRUGGY 5 BRUSHLESS RTR 1/10 4WD
€179.99*
€289.95*
(37.92% saved)
Product no.:
9775450
Manufacturer no.:
3166
The consistent further development of the 10,000 times proven BasicLine models now features steel gears (motor pinion and main gear) in an encapsulated gearbox, thus reducing wear on the gears to a minimum. The front and rear wishbone mounts are now made of aluminium, which gives the model even more stability. Standard on our BasicLine models is still the metal gearbox servo. The cables of the brushlee controller as well as the servo cables run safely in the model thanks to the new cable holders, damage caused by contact of rotating parts is almost completely excluded. The water-protected electronics as well as a high quality controller which convinces by reliability and quality are still a matter of course. The model is completely equipped with ball bearings and aluminium damper parts.With the powerful 3000 kv brushless motor, top speeds of over 60 km/h are possible.The spare parts of BasicLine 2 to 5 are fully compatible. We rely on continuity to be able to offer the best possible service. This ensures that you will receive spare parts for your model for years to come.The BasicLine models are always delivered RTR (Ready To Run) with battery and charger. 3166
-35%
ABSIMA AB3.4BL BUGGY BRUSHLESS RTR 4WD 1/10
€169.99*
€259.95*
(34.61% saved)
Product no.:
9762250
Manufacturer no.:
12242
Warning!Vehicle mutates into an untamed beast when operated with 3S (11.1V) Lipo battery!!!!!!!UNBELIEVABLE POWER - the new Hotshot 3.4BL series is equipped with a powerful brushless electric motor and waterproof electronic speed controller (ESC). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio SystemFull Aluminum ShocksSteel Motor TransmissionGENERAL CHASSIS FEATURES:4WDComplete ball bearing Adjustable aluminum oil shocksGear differential front/rearAluminum motor mountComplete covered transmissionNew chassis layout for better performanceAdjustable turnbucklesAdjustable wishbonesAero disc racing wheelsFull printed bodySticker sheet for a unique designA lot tune-up parts available!TECHNICAL SPECIFICATION:Measure (L/W/H): 380x255x155 mmWeight: 1400gWheelbase: 270 mmChassis clearance: 35 mmTire width: 33 mm front / 42 mm rearTire Ø ± 88 mmShock spring force: medium / Length: 85mm f/rDifferential oil viscosity: 1.000 front / 3.000 rearShock oil viscosity: 400 f/rSteel Motor transmission: Pinion 26T / Gear 64TPinion module: 0.6MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3300KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming 12242
-25%
ABSIMA AT3.4 Truggy Kit 4WD Race Truck 1/10 Kit
€74.99*
€99.95*
(24.97% saved)
Product no.:
9762259
Manufacturer no.:
12223KIT
"The Hot-Blooded-Shot" is probably the best description for action-packed racing with the new Absima RC Car generation. The Edition 3 comes up with some technical refinements next to racy and newly designed bodies. For example, the chassis was completely designed in the race layout and is now much lighter, for even longer driving pleasure. The smooth-running transmission and fibre-reinforced plastic parts round off the quality image.HIGHLIGHTSKIT Version for self assemblingRacing Body DesignIncluding 2 Versions of Motor Transmissions for Brushed & Brushless (Steel Version)NOTE: KIT Version don`t includes any electronic components!PRODUCT FEATURES Ball bearing transmissionOil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesMotor heat sinkAero disc racing wheelsFull printed bodySticker sheet for a unique designPerformance hop ups available!TECH SPECSDrive System: 4 Wheel DriveWheelbase: 270mmGround Clearance: 40mmMeasure (L/W/H): 405x325x165 mmWeight: 1375gTire width: 55 mm front / 55 mm rearTire Ø ± 105 mmShock spring force: medium / Length: 85mm f/rDifferential oil viscosity: 3.000 front /1.000 rearShock oil viscosity: 400 f/rMotor transmission: Pinion 23T / Gear 64TPinion module: 0.6 12223KIT
-39%
DRIVE & FLY MODELS BIGHAMMER 5 1/10XL RTR BRUSHED 4WD
€149.99*
€244.95*
(38.77% saved)
Product no.:
9742132
Manufacturer no.:
3075
Strong,Stronger, XL-Line!These models are intended for everyone who simply needs more than just stability. As XL already suggests, this is not a purebred model on a scale of 1/10, but rather high-quality parts from 1/8 models have been used, which guarantee maximum strength.The additional 2.5mm aluminium chassis in df Models Orange in combination with its matching upper deck is almost indestructible. Additional aluminium uprights, aluminium part dampers, adjustable camber/track, as well as many other innovations are the result of years of further development of this model series. And the integrated, waterproof motor control system, the encapsulated gearbox together with the powerful 9kg steering servo with metal gearbox make these models unbeatable! You want to heat over unpaved terrain at full throttle? You want to jump? With the XL-Line this is no problem, the 550 brushed motor accelerates the model to approx. 40 km/h. 3075
-35%
TAMIYA SUZUKI JIMNY JB23 MF-01X 1/10 4WD EP
€109.99*
€170.00*
(35.3% saved)
Product no.:
9718698
Manufacturer no.:
58614
The Suzuki Jimny is based on the MF-01X all-wheel drive M chassis. The Suzuki Jimny has been built since 1970 and is a legend in the offroad sector. The JB23 is the third generation and was introduced in 1998. The original was powered by a 658ccm turbocharged engine.Features:Kit model in scale 1:10Polycarbonate body of Suzuki Jimny JB23 incl. side mirrors4WD universal joint drive for on- and off-road use. The frame consists of 3 segmentsRally Block tyres (27 mm wide, 69 mm diameter)2-part chassis frame with gearbox housing540 Torque Tuned engineCompatible with previous M-chassis bodiesIncl. Brushless/Brushed speed controller TBLE-02S 58614
-23%
TAMIYA SUBARU WRX STI ARAI XV-01 1/10 EP 4WD
€199.99*
€260.00*
(23.08% saved)
Product no.:
9700280
Manufacturer no.:
300058528
Tamiya presents the latest XV-01 chassis - with the Subaru Impreza! Tamiya presents the latest XV-01 chassis - with the Subaru Impreza! The first RC model on the XV-01 chassis is the Subara Impreza WRX Sti, which was launched in 2011 by Team Subara Arai. Led by Toshihiro Arai, winner of the 2005 and 2007 championships, the Production Car World Rally Championship (PWRC) season, the team took the Impreza into the 2011 Intercontinental Rally Challenge (IRC) series. The team also drove at the Hokkaido Rally in the Asia-Pacific Rally Championship (APRC) in 2011, where the car impressively drove to victory. Features:This is a kit on a scale of 1:10XV-01 ChassisThe sporty shape of the Impreza has been realistically recreated with a robust polycarbonate body.A decal sheet is included to show the Arai Rallye team decoration.The chassis has a 4WD system driven by a toothed belt.Covers protect actuator and RC unit from dirt and depositsDouble wishbone with suspension struts on all wheels features high stroke and is equipped with rally block tread tyres to provide a dynamic RC rally ride on gravel and asphalt surfaces guarantee.separately shaped side mirror parts included.Electric motor type 540 300058528
-22%
PROLINE TOYO OPEN COUNTRY ROCKTERRAINTIRE V/H 1.9 G8
€27.99*
€35.99*
(22.23% saved)
Product no.:
9792849
Manufacturer no.:
PRO10211-14
The 1/10 Toyo Open Country R/T tire by PRO-LINE in the legendary G8 compound offers excellent traction even on the roughest terrain. Its open sipe profile improves overall grip in muddy, sandy or snowy conditions while allowing mud and snow to be ejected through the large open spaces.Dimensions:Size: 113mmWidth: 38mm PRO10211-14
-60%
ABSIMA Warning sign with sticker sheet
€1.99*
€4.95*
(59.8% saved)
Product no.:
9792630
Manufacturer no.:
2320092
2320092
-42%
Pelikan Foxy 700 race 9.6V DC motor
€14.99*
€25.99*
(42.32% saved)
Product no.:
9790261
Manufacturer no.:
3BD1040
Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.FOXY 700 Race 9.6V is a brushed electric motor size "700" with a shaft with a diameter 5.0mm and plain bearings. It is suitable for powering aircraft models with direct drive (9x4" propeller) or with a gearbox for a small car and boat models (35–40mm propeller).For controlling the RPM, you will need an ESC with a load capacity of 60–80A.FOXY 700 Race 9.6V is a suitable replacement for a motor SPEED 700 Race 9.6V.Set contains:Brushed electric motor FOXY 700 Race 9.6VUser manualSpecifications:Voltage (jmenovité) [V]9.6Voltage (provozní) [V]4.8 - 20RPM at rated voltage [ot./min]18000ESC [A]60 - 80Diameter [mm]42.2Length (sk?ín?) [mm]66Shaft diameter [mm]5Free shaft length [mm]10.5Weight [g]370 3BD1040
-44%
Pelikan Foxy 600 7.2V DC motor
€9.99*
€17.99*
(44.47% saved)
Product no.:
9790264
Manufacturer no.:
3BD1025
Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.FOXY 600 7.2 V is a brushed electric motor size "550" with a shaft with a diameter 3.175mm and plain bearings. It is suitable for powering aircraft models (for example motor gliders with a wingspan of 1800–2000mm) with direct drive (7x4" propeller) or with a gearbox for a small car and boat models (30–35mm propeller).For controlling the RPM, you will need an ESC with a load capacity of 30–40A.FOXY 600 7.2V is a suitable replacement for a motor SPEED 600 7.2V.Set contains:Brushed electric motor FOXY 600 7.2VUser manualSpecifications:Voltage [V]7.2Voltage [V]3.6 - 8.4RPM at rated voltage [ot./min]18500ESC [A]30 - 40Diameter [mm]36Length [mm]57Shaft diameter [mm]3.175Free shaft length [mm]9Weight [g]235 3BD1025
-38%
Pelikan Foxy 500 race 7.2V DC motor
€9.99*
€15.99*
(37.52% saved)
Product no.:
9790265
Manufacturer no.:
3BD1020
Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.FOXY 500 Race 7.2 V is a brushed electric motor size "540" with a shaft with a diameter 3.175mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (5x5" propeller) or with a gearbox for a small car and boat models (30mm propeller).For controlling the RPM, you will need an ESC with a load capacity of 30–40A.FOXY 500 Race 7.2V is a suitable replacement for a motor SPEED 500 Race 7.2V (product number 7306).Set contains:Brushed electric motor FOXY 500 Race 7.2VUser manualSpecifications:Voltage [V]7.2Voltage [V]3.7 - 12RPM at rated voltage [ot./min]23500ESC [A]30 - 40Diameter [mm]36Length [mm]50Shaft diameter [mm]3.175Free shaft length [mm]12.5Weight [g]189 3BD1020
-40%
Pelikan Foxy 180 4.5V DC motor
€2.99*
€4.99*
(40.08% saved)
Product no.:
9790269
Manufacturer no.:
3BD1000
Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.FOXY 180 4.5 V is a brushed electric motor size "180" with a shaft with a diameter 1.5mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (3x1.2" propeller) or with a gearbox for a small car and boat models.For controlling the RPM, you will need an ESC with a load capacity of 3–6A.FOXY 180 4.5V is a suitable replacement for a motor SPEED 180 4.5V (product number 6392).Set contains:Brushed electric motor FOXY 180 4.5VUser manualSpecifications:Voltage [V]4.5Voltage [V]3.7 - 7.4RPM at rated voltage [ot./min]12600ESC [A]3 - 6Diameter [mm]17.1Length [mm]18Shaft diameter [mm]1.5Free shaft length [mm]3Weight [g]16 3BD1000
-24%
GPM ALU+STAINLESS STEEL ADJUSTABLE FRONT STEERING TIE ROD -6PCS GPM ARRMA LIMITLESS INFRACTION TY
€18.99*
€24.90*
(23.73% saved)
Product no.:
9783936
Manufacturer no.:
GPMMAF162SBK
GPMMAF162SBK
-74%
TAMIYA A-PARTS CASTER EN (1) BENGAL TIGER 5601
€1.50*
€5.79*
(74.09% saved)
Product no.:
9725914
Manufacturer no.:
300005923
300005923
-41%
ABSIMA Snow chains for 108mm tyre diameter 2 pieces
€9.99*
€16.95*
(41.06% saved)
Product no.:
9780682
Manufacturer no.:
2320104
2320104
-25%
ABSIMA Aluminium motorpinion 18 teeth 48DP
€8.99*
€11.95*
(24.77% saved)
Product no.:
9780519
Manufacturer no.:
H478
H478
-69%
KILLER BODY Doorhandleset chrome-plated
€3.99*
€12.99*
(69.28% saved)
Product no.:
9780113
Manufacturer no.:
KB48235
KB48235
-55%
KILLER BODY Fuel filler cap with mechanism
€4.99*
€10.99*
(54.6% saved)
Product no.:
9780112
Manufacturer no.:
KB48231
KB48231
-20%
KILLER BODY Wheel nuts aluminium grey (4 pcs)
€7.99*
€9.99*
(20.02% saved)
Product no.:
9780098
Manufacturer no.:
KB48365GY
KB48365GY
-24%
ABSIMA NUMBER PLATES US CHROME (2)
€2.99*
€3.95*
(24.3% saved)
Product no.:
9776547
Manufacturer no.:
2320006
2320006
-67%
TRAXXAS TRACTION BOARDS, YELLOW
€2.99*
€8.95*
(66.59% saved)
Product no.:
9775951
Manufacturer no.:
TRX8121A
TRX8121A
-20%
TPRO FUEL BOOST RACING 16% RTR 2L SPRIT
€19.99*
€24.99*
(20.01% saved)
Product no.:
9775644
Manufacturer no.:
TPRS916T2
First Choice in terms of a reliable and high quality fuel for Hobby, RTR but Racing too. The lubricant system has been studied to get the best from the engine, maintaining an easy tuning and obtaining long life of the engine. Well proven formula with adapted Castor/Synthetic ratio und using the best raw materials and additives. TPRO "Boost" gets a double quality check within each batch of fuel.It comes in certified white 2l TPRO plastic cans with red security caps.- Methanol with optimal acid and moisture content- Nitromethane with optimal purity and selected acid specification- Castor oil from first pressing, degummed and filtered and with ideal indicators e.g. iodine indicator- Synthetic oil with different viscosities, depending on the application- Corrosion Inhibitor- Friction modifier- Defoamer TPRS916T2
Content: 2 l (€10.00* / 1 l)
-62%
ABSIMA MINIATURE GOLF CLUB SET GREEN 1/10
€2.99*
€7.95*
(62.39% saved)
Product no.:
9771617
Manufacturer no.:
2320093
For the shot from the sand pit - Scale golf club set on a scale of 1:10 Features : -Material metal golf clubs / plastic golf bag -single racket removable -dimensions incl. golf bag : length 83 mm / Ø 19 mm -Weight complete approx. 12 g -Colour golf bag green - grey / club silver with black handles Scope of delivery : -2 pcs. "iron" -1 pc. putter -1 pc Golf bag 2320093