Filter
–
–
–
–
–
–
–
–
–
-42%
SAVÖX SH-1357 (6V/2,6KG/0,07s) Mini Size Coreless Digital Servo
€26.99*
€46.90*
(42.45% saved)
Product no.:
9795923
Manufacturer no.:
SH1357
The Savox SH-1357 is a micro sized, digital servo that is extremely fast for its size without having to use higher voltage batteries which makes it great for a number of applications.Features:Light weightCoreless Motor provides high speed, incredible efficiency, and low power consumptionThe Aluminum Case design not only looks good but also allows for lower operating temperatures.Totally Green - from materials to production, these servos are environmentally friendly.Ideal as a rudder servo on 450 class helis, and as a CCPM servo on 500 class helis.Specifications:Speed @ 6.0V: 0.07 sec/60degTorque @ 6.0V: 34.7 oz-in / 2.5 kg-cmWeight: 26gBearing: DualType: MiniGear: Industrial PlasticCase: AluminumOutput Shaft: 25T SplineCase Size (LxWxH): 35x15x29.2mm SH1357
-50%
MODELLBAU LINDINGER EC-2 (CT) BUCHSEN 1STK.
€0.99*
€1.99*
(50.25% saved)
Product no.:
9707683
Manufacturer no.:
81216
81216
-50%
MODELLBAU LINDINGER EC-2 (CT) STECKER 1STK.
€0.99*
€1.99*
(50.25% saved)
Product no.:
9707684
Manufacturer no.:
81215
81215
-25%
HITEC HS-5565 MH DIGI HV UNI SERVO
€59.99*
€79.99*
(25% saved)
Product no.:
96034
Manufacturer no.:
114565
The inexpensive and fast 2S LiPo Servo with metal gear for the ambitious aerobatic pilot. Excellent quality at a fair priceSophisticated SMD technologyHigh positioning forces and high actuating speedsRobust mechanical construction of the gear unitExtensive range of accessories Proven competitive materialD: 32-bit resolutionTW: Titanium, wide voltage (4.8V-8.4V)SW: steel, wide voltage (4.8V-8.4V)MW: Metal, wide voltage (4.8V-8.4V)HSB: Brushless MotorSGT: Steel gearbox for high torquePRG: programmableNRG: low current consumptionTH: Titanium drives - 8,4VSH: Steel gearbox - 8,4VMH: Metal gear unit - 8,4VBra: Plastic gear unit - 8,4VTG: Titanium drives with ball bearingsMG: Metal gear unit with ball bearingsHB: Carbonit gearbox with ball bearings BB: ball bearing mountedHD: Carbonite transmissionWP: WaterproofG2: Second Generation 114565
-50%
ACT AFL-5 5V USB powersource USB interface for charging smartphones etc.
€9.99*
€19.95*
(49.92% saved)
Product no.:
9778411
Manufacturer no.:
01008014
DescriptionCell phone & tablet charge from (almost) any model making battery. We are constantly working with rechargeable batteries in model making - i.e. with electrical energy. And yet it happens that the power goes out at the airfield ... that doesn't have to happen! For model builders this problem is solved. The AFL-5 turns almost every model building battery into a powerful power bank.The AFL-5 generates the necessary 5V at the USB output from every model building battery with a nominal voltage of 6V or higher. When using receiver or drive batteries with T-socket (2-6S LiPo or 5-16 cells NiMH), the AFL-5 USB interface always provides the required 5V - just like a smartphone charger.The charging current is up to 3 Ampere. The maximum charge current flows automatically when the smartphone battery is almost empty and is then reduced as the battery becomes full. In addition to the AFL-5 USB interface, a suitable battery and the appropriate USB charging cable to the smartphone are required.By the way: The FUTABA T32MZ transmitter can also be charged via the USB interface.Technical dataInput voltage at T-connector: 6-24VOutput voltage at the USB socket: 5VOutput current: max. 3AFeaturesUSB interface for charging Smartphone, Tablets & moreAlso suitable for FUTABA T32MZMaximum 3A charge currentT-Connector ConnectionSuitable for 2-6S LiPo / 5-16 cells NiMHLED for charge control 01008014
-72%
ACT T12K 3D-Film Carbonlook 4er Set (4 Colours)
€13.99*
€49.90*
(71.96% saved)
Product no.:
9778278
Manufacturer no.:
01008084
FUTABA T12K - Now in an exclusive 3D carbon look...!The powerful feature & software package of the Futaba T12K, now shines in an attractive 3D carbon look...! You can choose between the color variants blue, red, silver-grey and black. Of course all four colors can be mixed on one transmitter. Just let your creativity run free...!The film is NOT a printed film, but a specially developed structural film with 3D carbon surface structure.The film elements are cleanly plotted and can be applied exactly to the transmitter housing. For this purpose, the adhesive surface of the foil and the surface of the transmitter to be glued are thinly coated with rinsing water so that the decorative parts can still be moved when applied. We expressly recommend this wet bonding method described in the instructions.There are 3D air channels in the adhesive surface of the foil, which allow air and water to be brushed out easily. If used properly, the decors can be removed from the transmitter later without leaving any residue. In the end, you will hold your T12K in your hands with an individual exclusive design. 01008084
-63%
ACT T12K 3D-Film Carbonlook silver
€5.59*
€14.95*
(62.61% saved)
Product no.:
9778276
Manufacturer no.:
01008082
FUTABA T12K - Now in an exclusive 3D carbon look...!The powerful feature & software package of the Futaba T12K, now shines in an attractive 3D carbon look...! You can choose between the color variants blue, red, silver-grey and black. Of course all four colors can be mixed on one transmitter. Just let your creativity run free...!The film is NOT a printed film, but a specially developed structural film with 3D carbon surface structure.The film elements are cleanly plotted and can be applied exactly to the transmitter housing. For this purpose, the adhesive surface of the foil and the surface of the transmitter to be glued are thinly coated with rinsing water so that the decorative parts can still be moved when applied. We expressly recommend this wet bonding method described in the instructions.There are 3D air channels in the adhesive surface of the foil, which allow air and water to be brushed out easily. If used properly, the decors can be removed from the transmitter later without leaving any residue. In the end, you will hold your T12K in your hands with an individual exclusive design. 01008082
-63%
ACT T12K 3D film Carbonlook blue metallic
€5.59*
€14.95*
(62.61% saved)
Product no.:
9778274
Manufacturer no.:
01008080
FUTABA T12K - Now in an exclusive 3D carbon look...!The powerful feature & software package of the Futaba T12K, now shines in an attractive 3D carbon look...! You can choose between the color variants blue, red, silver-grey and black. Of course all four colors can be mixed on one transmitter. Just let your creativity run free...!The film is NOT a printed film, but a specially developed structural film with 3D carbon surface structure.The film elements are cleanly plotted and can be applied exactly to the transmitter housing. For this purpose, the adhesive surface of the foil and the surface of the transmitter to be glued are thinly coated with rinsing water so that the decorative parts can still be moved when applied. We expressly recommend this wet bonding method described in the instructions.There are 3D air channels in the adhesive surface of the foil, which allow air and water to be brushed out easily. If used properly, the decors can be removed from the transmitter later without leaving any residue. In the end, you will hold your T12K in your hands with an individual exclusive design. 01008080
-27%
ACT DPS SPLITTER 10 PWM HIGH POWER SUPPLY
€79.99*
€109.95*
(27.25% saved)
Product no.:
9776624
Manufacturer no.:
01008006
FEATURESDPS splitter for high current supply of receiver and servos18 servo outputs2x battery connector XT60DESCRIPTIONThe DPS Splitter 10 PWM is designed for high current supply of receiver and servos (receivers and servos of all brands). The servos are usually connected to the appropriate sockets (contact is pin) in the receiver. These supply the servos with power and with the position and control signal. A single socket on the receiver is then responsible for connecting the battery or switch cable. If several servos are required to operate simultaneously at high power and/or high speed, this is always a problem for the power supply to the servos, because power and speed always go hand in hand with high current consumption.This power requirement cannot be made available in sufficient quantity to the battery via the individual plug connection on the receiver, and this creates a "bottleneck" for the necessary servo current. If necessary the voltage drops, the servos become less powerful or slower, or both. In the worst case these even stop and the receiver fails. Depending on the current requirement.Principle battery backerBattery backers are used to provide redundant power to a system by using a second battery. This results in "battery redundancy". Two batteries are used so that in case of failure of one battery, the other battery maintains the power supply of a system. In principle, this would be easy to solve by simply connecting a second battery in parallel to the system. Unfortunately, the "Ohm's law" gets in the way: Current always flows from a higher voltage to a lower voltage... So from the battery with the higher voltage to the one with the lower voltage - always. Never will two batteries have the same voltage or load capacity. So the current of the better battery does not flow to the system, but to the "worse or empty battery". This usually leads to the complete destruction of both batteries and to a crash from the model.The ACT high current battery splitter system therefore solves the following problems:Servos with high current requirements are connected to the battery splitter, not to the receiver.A splitter has two high-current connections for two receiver batteries via the integral battery backer, and the voltage from these is then fed (via the integral battery backer) directly and without loss to the servo sockets on the splitter.The position and control signal for the servos is fed to the individual sockets separately from the receiver. To enable the receiver to operate, it receives its voltage from the splitter via a single patch lead. ( S.BUS signal, all parallel )The control and position signal is separately routed to the plug connections of the splitter. Either via the S.BUS on Futaba receivers, or via patch signal cables when using other than Futaba receivers.The operating current for servos and receiver is therefore "split".Why high current for servos, what happens if there is a shortage?The large, dynamic, very short fluctuations in the current demand (current peaks) of today's servos require an unimpeded supply of current to the servos, so not only must high-current batteries be used, but also connectors and cables must be able to deliver the high current to the servo sockets.This is one reason why any voltage control system tends to work unsatisfactorily; it is always "slower" than the fast (dynamically) fluctuating current demand of the servos, and slower than a high-current battery, which can certainly supply these current peaks.However, modern servos need precisely these current peaks in order to be able to deliver their actual performance. So there is nothing better for supplying power to such servos than to lead the battery voltage to the servos in the most direct way possible, without any voltage regulation or other resistors such as unsuitable plugs or long or thin cables.The best way to adapt to different servo voltages is to use appropriate battery types. LiFe batteries for all servos, or LiPo batteries for LiPo(HV) servos. Voltage regulation is therefore not necessary.TECHNICAL DATASplitter: 10 PWMServo outputs: 10Battery connection: 2x XT60Continuous current max: 60Avoltage range: 5-8,4VInput voltage = output voltageDimensions: 68x47x17mmWeight: 59g 01008006
-40%
ACT RESIDUAL CURRENT CONDENSE 4700µF FOR RECEIVER IN BATTERY SWITCH MODE
€5.99*
€9.95*
(39.8% saved)
Product no.:
9771573
Manufacturer no.:
01008003
DESCRIPTIONWhen using battery backers on receiver systems with many servos, the servo return currents which occur cannot be stored in the battery (the diode in the battery backer prevents this) and then flow directly into the receiver electronics. Although there are also storage capacitors there, these are usually too small to provide adequate protection when many servos are used simultaneously.The ACT power capacitor solves this problem. It stores the reverse current energy and then returns it back to the "system receiving system" even when high current peaks are required, thus even supporting the battery for a short time. However, this is only possible with special types of capacitors with "Low ESR Technology", a technology that allows capacitors to be charged and discharged very quickly. Our ACT Power-Condesator uses this technology.In general, the higher the capacity of the capacitor, the better the protection and recovery energy. It is difficult to give a clear recommendation, because the servo return currents depend on the servo types and functions used, and the capacitors in the servo electronics can also absorb energy from each other. You can find more details in the section "Quality and Engineering" on the start page of our homepage. In general we recommend using the ACT Power capacitor when using 6 (and more) powerful servos in conjunction with a battery backer on the receiver.The connection is simply made to a free servo or battery socket on the receiver. 01008003
-35%
ACT PLUG CHARGER 500MAH ONLY FOR LIPO TRANSMITTER- RECHARGEABLE BATTERY FX-36
€12.99*
€19.95*
(34.89% saved)
Product no.:
9770560
Manufacturer no.:
330025011
DESCRIPTIONThis charger can be used to charge special LiPo transmitter batteries which have an integrated balancer (e.g. the MaxPro LiPo TX battery 7.4V 2800mAh with order number 100031MAX2049). Charging is done via the charging socket of the transmitter, suitable only for Futaba FX36Important note: the charger may only be used if the transmitter is operated with a LiPo battery with integrated balancer ! Under no circumstances should it be used with normal LiPo batteries without an integrated balancer, otherwise both the battery and the transmitter may be damaged. Be sure to pay attention to the instructions on the transmitter battery, or if in doubt ask the ACT / Futaba Service Department.TECHNICAL DATA- Input: 100 - 240V 50/60 Hz- Output: 8.4 V / 500mAh 330025011
-65%
MODELLBAU LINDINGER XT-60 TO TRAXXA'S FEMALE ADAPTER
€0.69*
€1.99*
(65.33% saved)
Product no.:
9725819
Manufacturer no.:
XT60-TRAXXAS
XT60-TRAXXAS
-26%
FUTABA R 7006SB 6/(18) CHANNEL RECEIVER SOCKET/SOCKET TEST, S-BUS, S-BUS 2 COMPA
€79.99*
€108.45*
(26.24% saved)
Product no.:
9723042
Manufacturer no.:
FPR7006SB
The R7006SB is a compact and lightweight 2.4GHz receiver with modulation modes FASST and FASSTest. Up to 6 conventional and 18 S.BUS servos can be connected.Features:- Channels: 6 PWM or 18 S.BUS- Operating voltage: 3.7 - 7.4V- Modulation: FASSTest & FASST- S.BUS: S.BUS & S.BUS2 FPR7006SB
-50%
RCSOLUTIONS SERVO FRAME DES 427BB /428BB MG / DS 09 AND SIMILAR
€5.99*
€11.99*
(50.04% saved)
Product no.:
9720019
Manufacturer no.:
A90326
Serves for the Graupner DES 427BBB and DES 428 BB MG and the Altlas HP-DS09.Features:- Width 36.0mm - Height 31.6mm - Thickness of the contact surface approx. 0.7mm - Weight (incl. screws) 2.0g Servo mounting frames from RCsolutions are characterised by robustness, high precision and easy assembly. Many competition pilots trust RCsolutions servo mounting frames!Characteristics: Perfect fitting accuracy Servo can be mounted and removed in the shortest possible time Servo does not press on the wing shell Very light Robust (competitive tested!) Increases the thickness of the wing required for installation by a few tenths of a millimetre A90326
-19%
SAVÖX SB-2261MG (6V/10KG/0,076s) BRUSHLESS DIGITAL LOW PROFILE SERVO
€64.99*
€79.90*
(18.66% saved)
Product no.:
9715063
Manufacturer no.:
SB2261MG
The new Savöx SB-2261 Low Profile Brushless Digital Servo is equipped with 12 bit resolution and extremely strong metal gears. The extremely light construction and the low weight make the SB-2261 an absolute top servo. SB2261MG
-50%
WELLPOWER BALANCER V-CABLE XH 2X3S IN 6S
€0.99*
€1.99*
(50.25% saved)
Product no.:
9712968
Manufacturer no.:
2*4PMALE CHANGE TO 1 7P FEMALE
2*4PMALE CHANGE TO 1 7P FEMALE
-35%
SAVÖX SB-2283MG (7,4V/10KG/0,048s) BRUSHLESS DIGITAL HV SERVO
€64.99*
€99.99*
(35% saved)
Product no.:
9710602
Manufacturer no.:
SB2283MG
Field of application: helicopter, airplane SB2283MG
-33%
ABSIMA ACS1615SG COMBAT SERIES SERVO
€39.95*
€59.95*
(33.36% saved)
Product no.:
9709974
Manufacturer no.:
2030011
...is the revolutionary servo generation "Made by Absima". Reliable, powerful and extremely robust - the elitist way to move a model. Combat - Safety: All servo gears are made of extremely robust quality steel and are therefore much more resistant than titanium alloys. Application area: Car and flight for racer and competition 2030011
-67%
MODELLBAU LINDINGER TRANSMITTER STRAP COMFORT 25MM TRANSMITTER WITH "LINDINGER" IMPRINT
€4.99*
€14.99*
(66.71% saved)
Product no.:
9707115
Manufacturer no.:
987654321
Comfort shoulder strap for remote controls with 25mm width and neck cushion for extra comfort. Imprint www.lindinger.at. 987654321
-29%
SAVÖX SB-2272MG (7,4V/7KG/0,032s) BRUSHLESS DIGITAL HV SERVO
€66.99*
€94.99*
(29.48% saved)
Product no.:
92987
Manufacturer no.:
SB2272MG
The new Savöx SB-2272MG Brushless Digital Servo combines high speed and high torque. Perfect for helicopters, 1/10 and 1/8 onroad and offroad vehicles. SB2272MG
-59%
MODELLBAU LINDINGER SENSOR EXTENSION 30CM 4S XH
€4.54*
€10.99*
(58.69% saved)
Product no.:
87098
Manufacturer no.:
56484
Sensor extension cable for system XH with 30cm length! 56484
-75%
MODELLBAU LINDINGER HEAT SHRINK TUBING 15MM RED/BLACK 1 METER
€0.50*
€1.99*
(74.87% saved)
Product no.:
71933
Manufacturer no.:
AM-1518-15MM
AM-1518-15MM
-81%
MODELLBAU LINDINGER GOLD CONNECTOR PLUGS 3MM (FEMALE) 5 PCS.
€0.50*
€2.59*
(80.69% saved)
Product no.:
63402
Manufacturer no.:
AM-1001B-FEMALE
AM-1001B-FEMALE
-77%
FUTABA TRANSMITTER STRAP 1-POINT
€3.99*
€16.99*
(76.52% saved)
Product no.:
45287
Manufacturer no.:
P-D70004
Weicher, längenverstellbarer Umhängeriemen, mit Karabinerhaken und Wirbellager. Passend für Sender Attack, F-14, FC-16, FF3, FF8, Skysport 4, und ähnliche. P-D70004
-60%
Robbe Modellsport SERVO EXTENSION CABLE 0.3MM² 100 CM
€1.99*
€4.99*
(60.12% saved)
Product no.:
9747637
Manufacturer no.:
4646
4646
-25%
Robbe Modellsport SERVO EXTENSION CABLE 0,3MM² 40 CM
€2.99*
€3.99*
(25.06% saved)
Product no.:
9747635
Manufacturer no.:
4645
4645
-33%
Robbe Modellsport ADAPTER TRX FEMALE TO 5,5MM GOLD PLUG CONNECTORS 1PCS
€3.99*
€5.99*
(33.39% saved)
Product no.:
9767534
Manufacturer no.:
46218
46218
-40%
Robbe Modellsport ADAPTER MPX FEMALE TO 5,5MM GOLD PLUG CONNECTORS 1PCS
€2.99*
€4.99*
(40.08% saved)
Product no.:
9767529
Manufacturer no.:
46213
46213
-40%
Robbe Modellsport ADAPTER EC-3 FEMALE TO 5,5MM GOLD PLUG CONNECTORS 1PCS
€2.99*
€4.99*
(40.08% saved)
Product no.:
9767523
Manufacturer no.:
46207
46207
-40%
Robbe Modellsport ADAPTER EC-3 MALE TO 5,5MM GOLD PLUG CONNECTORS 1PCS
€2.99*
€4.99*
(40.08% saved)
Product no.:
9767522
Manufacturer no.:
46206
46206