Filter
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
from
1350 U/V
to
1480 U/V
-17%
VALUEPLANES VP2600 Glider ARF with GRP fuselage
€299.99*
€359.99*
(16.67% saved)
Product no.:
9798178
Manufacturer no.:
VP-VP2600B
"VP2600" is a simple, yet very powerful glider or electric model with a compact wingspan of 2.6 metres. It is controlled via 2 axes with elevator and rudder. The tail is attached with a conical carbon tube. The tailplane is attached to this with a carbon fibre bracket in the form of a pendulum tailplane. The assembly of the kit does not present any major obstacles for the average experienced modeller. The building instructions are in English but contain many self-explanatory pictures. The building plan is printed in M1:1 to simplify assembly considerably.If the model is to be used as an electric glider, the nose of the fuselage must be cut off first. This has the advantage that the spinner diameter and motor can be varied to a certain extent. Spinners with a diameter of 32 mm have proven to be ideal.The recommended motor is a 22-29 motor for a 3S setup with a 10x8" propeller.We recommend a 9mm servo for the tailplane in the fuselage. As a special feature, the rudder is mounted directly in the vertical stabiliser. The servo used here should not be wider than 8mm as space is limited.The position of the receiver, the battery and the controller in the case of an electric version, is not specified by the manufacturer. The modeller can incorporate his personal preferences here. VP-VP2600B
-10%
VALUEPLANES VP2600 Glider kit with GRP fuselage
€179.99*
€199.99*
(10% saved)
Product no.:
9798177
Manufacturer no.:
VP-VP2600A
"VP2600" is a simple, yet very powerful glider or electric model with a compact wingspan of 2.6 metres. It is controlled via 2 axes with elevator and rudder. The tail is attached with a conical carbon tube. The tailplane is attached to this with a carbon fibre bracket in the form of a pendulum tailplane. The assembly of the kit does not present any major obstacles for the average experienced modeller. The building instructions are in English but contain many self-explanatory pictures. The building plan is printed in M1:1 to simplify assembly considerably. If the model is to be used as an electric glider, the nose of the fuselage must be cut off first. This has the advantage that the spinner diameter and motor can be varied to a certain extent. Spinners with a diameter of 32 mm have proven to be ideal.The recommended motor is a 22-29 motor for a 3S setup with a 10x8" propeller. We recommend a 9mm servo for the tailplane in the fuselage. As a special feature, the rudder is mounted directly in the vertical stabiliser. The servo used here should not be wider than 8mm as space is limited. The position of the receiver, the battery and the controller in the case of an electric version, is not specified by the manufacturer. The modeller can incorporate his personal preferences here. VP-VP2600A
-9%
FREEWING F-15C Eagle Super Scale High Performance 90mm EDF Jet (9B) - PNP
€519.99*
€569.00*
(8.61% saved)
Product no.:
9797045
Manufacturer no.:
FJ30913P
Freewing F-15C Eagle Super Scale High Performance 9-Blade 90mm EDF Jet in "Gulf Spirit" Scheme - PNP Version Info: This is the 9-Blade High Performance version of the Freewing F-15C. This version includes a powerful 3672-1900Kv inrunner motor with new lightweight 9-blade fan. The pictures show the optional drop tank and weapon set which is not included with the plane. These can be purchased separately by clicking the "upgrades" tab.The F-15C Eagle is arguably the world’s most successful fourth generation fighter jet. It delivered the highest thrust, fastest top speed, furthest range, highest combat kill ratio and longest service life among its contemporaries. Our team worked closely with Freewing to develop an RC model which brings the excitement and scale performance of this hallmark aircraft to your local flying field. We chose the livery of AF85102 “Gulf Spirit” of the 58th TFS/33rd TFW, whose pilots combined for three kills during the Gulf War in 1991 and continued on strength with the 12th FS into the 2000s.Freewing’s F-15C boasts a powerful single 90mm power system and features a range of scale details which set it apart from any other electric F-15. Accurate aircraft lighting using “Daybright” LEDs, sequenced gear doors and landing light, aluminum landing gear struts with ample compression for operation on short grass or pavement, and metal trunnion retracts for durability. The aircraft also features highly detailed 30 piece plastic exhaust nozzles which rival the 3D detail level of RC turbine jets costing thousands of dollars, and an electric speed brake which works in conjunction with the flaps to stabilize that perfect scale landing approach. The elevator mounting and control hardware is reinforced to provide rigidity in high-G maneuvers. Each F-15C also uses over 100 waterslide decals, meticulously applied at the factory by hand to finish off the iconic look of an F-15C Eagle.Beyond its outer scale fidelity, we optimized this F-15 for ease of use, making it a great choice for weekend flying. A single 90mm powers the aircraft for better efficiency versus a twin 70mm setup, and the bifurcated outlets are sized at 88% FSA total. The fiberglass nose cone easily detaches with magnets, and the wings can be removed for transport. In fact, the model assembles entirely with only 14 screws, and all surfaces can be removed for transport, repair, or replacement.Intended as a "Scale Plus" flyer, the Freewing F-15C excels in scale maneuvers and stability throughout its flight envelope. The aircraft's wing and elevator use semi-scale airfoils, and at the middle throttle range the aircraft is "floaty." Compared to other 90mm jets, we would rank the F-15 as one of the more easy to fly. With speed brakes and flaps deployed, we clocked the F-15’s landing speed at 23mph, and we clocked an average top speed of 100mph in level flight. With mixed throttle, an Admiral 6s 5000 mAh 50c battery gives 3-4 minutes of flight.As of September 2021, new Freewing F-15s include the following improvements:1) Additional carbon reinforcement inside the forward fuselage2) Plastic reinforcement along the exterior of the forward fuselage3) Modified foam cradle to eliminate cracking stress points during shipping4) Enlarged the nose retract to a larger size: SKU# ET8403.FEATURES:Large scale electric ducted fan RC jet sporting an accurate USAF liveryNEW! Now includes High Performance 3672-1900Kv inrunner motor with new lightweight 9-blade fanHobbywing 130 Amp Hobbywing ESC with 8A UBECElectric retracts with scale, shock-absorbing struts and main operation, CNC'd from 6061 aluminum and suitable for pavement or short grassElectric wormgear-driven air brakeSequenced gear doors provide added realism and reduced dragRemoveable wings and flight surfaces, including a magnetic nose cone, for easy transport and compact storageMachine screws and brass threaded inserts are used to attach the wings for a secure fit and longevityBright LED navigation lights for enhanced realism and dawn/dusk maneuversCarbon fiber wing spars and reinforced body partsUpgraded pushrod clevis and metal ball head connectors on elevators provide a robust connection between servo and control surface and eliminate "slop"Nylon, gapless hinges on all control surfaces (superior to foam hinges)All electronics and components are pre-installed for your convenience. Just plug in your receiver, your charged battery, and fly! (PNP only) FJ30913P
-60%
ideecon Junior Wing throwing glider "Wingo Edition
€5.99*
€14.99*
(60.04% saved)
Product no.:
9795914
Manufacturer no.:
+
Rugged free flight model made of EPP with decoration set and rubber skid. "Wingo Edition" leads to the legendary entry-level model "Wingo" via QR code on the decal set. +
-7%
Seagull Models ( SG-Models ) Magic Bird 40e 46" PNP Pylon Racing ARF model, with Dualsky drive, yellow/blue
€369.99*
€398.99*
(7.27% saved)
Product no.:
9795701
Manufacturer no.:
SEA380PNP-Green
"Seagull-Models" / "SG-Models" are inexpensive models mostly made of wood with an excellent price/performance ratio! The product line includes many beautiful and unusual aircraft types that bring variety to every airfield. Almost all models can be used with both combustion and electric drives. The required accessories are included in the scope of delivery for these models. All models are supplied with comprehensive, illustrated and easy-to-understand English assembly instructions. The high degree of prefabrication enables a short remaining assembly time. All models are subjected to extensive flight tests before series production and therefore have very good flight performance. SEA380PNP-Green
-31%
PLANET-HOBBY Rasant wooden kit combustion version (B-goods from zero series!)
€89.99*
€129.99*
(30.77% saved)
Product no.:
9794493
Manufacturer no.:
2689
Special price because "zero series" kits with minor errors in instructions, accuracy of fit and scope of delivery!This offer is therefore only aimed at buyers who are able to make adjustments.To fly the RASANT, you do not have to be an expert. Nevertheless, the model requires some experience from the pilot, his "temperament" can range from harmless to wild speedingand turns. In the vertical climb, the visibility is quickly reached due to the high speed. For the landing the RASANT can move slowly "hovered". There is no situation from which the model cannot be safely recovered. When throttled down, the relatively large surface depth allows marvellous slow flights, only to climb almost vertically into the sky at full throttle the next moment. Controlled via all riders, the Rasant is fully aerobatic. If you are more fond of "speeding", you can dispense with the rudder linkage. 2689
-16%
FMS Ranger PNP + float - 122 cm - Combo incl. Reflex Gyro System
€199.99*
€239.00*
(16.32% saved)
Product no.:
9791866
Manufacturer no.:
DPFMS111PF-REF
As the newest member of the FMS multi-purpose aircraft lineup,the 1220mm Ranger retains all of the fantastic features that pilots have come to expect from FMS- stable flight characteris-tics, easy to assemble airframe and realistic,general-aviation inspired design.Built with ultralight EPO foam, the large, high-winged airframe configuration gives the Ranger low wing-loading and extraordi-nary amounts of lift, even at slow speeds. Robust plastic struts give extra strength to the wings during aerobatic maneuvers and the patented high-strength tricycle landing gear makes ground handling a breeze.A great aircraft is nothing without a great, dependable power system- FMS has equipped the Ranger with a 3136/1200KV outrunner motor with 20A Predator ESC, which allows the Ranger to climb almost vertically on demand! In the box, the Ranger comes with two sets of landing gears- a high-strength metal landing gear for ground operations and a pair of floats with an integrated rudder for water operations.Designed with a yellow and white high-visibility color scheme,the Ranger can always be easily orientated even in gloomy,overcast weather.Like the Super-EZ and the Kingfisher, the Ranger is designed with ease of assembly in mind. Requiring only 6 (wheeled landing gear) or 10 (floats) screws to completely assemble, the longest wait time is the time it takes to charge the battery!Features:High-spec power system: 3136/1200KV motor, Predator 20A ESC Two landing gear types included- Tricycle and floats!High strength, lightweight metal landing gear for all-ter-rain operations.Screw-together and twist-lock assembly,completed in 3-10 minutes10-15 minute flight times (RTF specification)One piece horizontal stabilizer for precise flight character-istics DPFMS111PF-REF
-57%
JTA Innovations Gamebird ( yellow/RED ) new 33" EPP 3D Aerobatic Model
€29.99*
€69.99*
(57.15% saved)
Product no.:
9781948
Manufacturer no.:
A406-Y/R
Based off the high performance full scale aerobatic machine, the Game Composites GB-1 Gamebird, the new JTA Innovations 33” 6mm EPP model is sure to catch attention both on the ground and in the air. Developed under approval by Philipp Steinbach, there is no doubt it compliments the outstanding characteristics of the full scale. The Gamebird is constructed with the same carbon fiber technique that has held up on the 32” Yak, and high quality hardware that will greatly increase the longevity of the airframe. Excelling in all areas of flying, the Gamebird is aimed to please any type of RC aerobatic pilot whether that is the beginner 3D pilot or advanced freestyle pilot. Not many other foamies have the wide range of flight envelope of the JTA Gamebird.Weight: Approximately 175g-190g without batteryRecommended EquipmentMotor: T-Motor AT2303 2300, Hacker A10-9L or equivalent/similarESC: 10-15 ampServos: 6-12g (MKS HV6100 highly recommended)Propeller: 8”-9” (APC 3D SF Indoor props highly recommended)Battery: 2S or 3S 300-700mAh (depending on motor/ESC setup) Note: JTA models do NOT come with assembly instructions! However, these are available in the download area! A406-Y/R
-33%
Seagull Models ( SG-Models ) P-47D "Little Bunny" MK II ARF 1,4m with NACA leading edge
€299.99*
€445.99*
(32.74% saved)
Product no.:
9770751
Manufacturer no.:
SEA338
KEY FEATURESIt is perfect for the entry-level pilot. It will allow you to go from training to advanced sport maneuvers without upgrading or purchasing a new plane. Once you’ve mastered the basics with the help of a flight instructor, simply remove the NACA droops and advance to sport maneuvers and it has incredible scale detail.· Progressive design allows smooth advancement to the next level of RC flight· Removable plastic NACA droops for extra stabilization during training.3-D computer engineering produces parts that fit with absolute precision for straight, strong assembly.Slotted flaps provide function as well as scale appearance to maintain scale lines.The wood is of high quality of balsa and balsa plywood and birch plywood from Russia and the laser-cutting is very well done.The Seagull P-47D MkII is not your average trainer. After the first takeoff, all doubt was removed. With the NACA droops and low rates it is a tame flier. It easily flies big gentle patterns so you can work on abusing that landing gear, opps - I mean work on landings. I would recommend that you install the optional servos for flaps.I would recommend that if you are learning to fly, do two things. The first is join your local club and find a qualified, experienced instructor. The second is to get a computer simulator and practice every chance you get!When you're ready to step up, go to a 2 blade propeller and spinner, remove the NACA droops and kick up the control throws. Then the Seagull P-47D MK II becomes a great second airplane. You will learn aerobatics while perfecting those spot-landing skills with the flaps. If you want to progress to a warbird, I feel that this airplane is a good stepping stone.By using the "NACA" preflights (removable) they increase the stability and good-naturedness additionally and thus the model is also well controllable for less experienced pilots. "Seagull-Models" / "SG-Models" are inexpensive models mostly made of wood with an excellent price/performance ratio! The product line includes many beautiful and unusual aircraft types that bring variety to every airfield. Almost all models can be used with both combustion and electric drives. The required accessories are included in the scope of delivery for these models. All models are supplied with comprehensive, illustrated and easy-to-understand English assembly instructions. The high degree of prefabrication enables a short remaining assembly time. All models are subjected to extensive flight tests before series production and therefore have very good flight performance. SEA338
-32%
Seagull Models ( SG-Models ) YAK 11 71" 1.8M ARF Warbird "AIRRACE" Perestroika
€339.99*
€499.99*
(32% saved)
Product no.:
9750311
Manufacturer no.:
SEA302
Realistic replica of the legendary Rene Airrace classic "Perestroika". This YAk-11 is originally a highly modified race version to achieve maximum speed in the circuit. The model is delivered with a mechanical retractable undercarriage and can be operated either with an internal combustion engine in the class approx. 20ccm or an electric motor approx. 1100-2000W (8-10S).Features:- agile, aerobatic model- high-quality, light balsa/plywood construction- demountable wings - detailed cockpit- GRP bonnet- extensive accessoriesDimensions engine hood:Diameter approx. 215mm / depth approx. 245mm "Seagull-Models" / "SG-Models" are inexpensive models mostly made of wood with an excellent price/performance ratio! The product line includes many beautiful and unusual aircraft types that bring variety to every airfield. Almost all models can be used with both combustion and electric drives. The required accessories are included in the scope of delivery for these models. All models are supplied with comprehensive, illustrated and easy-to-understand English assembly instructions. The high degree of prefabrication enables a short remaining assembly time. All models are subjected to extensive flight tests before series production and therefore have very good flight performance. SEA302
-26%
Seagull Models ( SG-Models ) MESSERSCHMITT BF-109 (ME-109) ARF WARBIRD MIT MECHANICAL RETRACTABLE LANDING GEAR
€349.99*
€469.99*
(25.53% saved)
Product no.:
9737697
Manufacturer no.:
SEA278
The Messerschmitt BF 109 was the German standard fighter in World War II and, with over 33,000 units built, the most built fighter aircraft in the world. This beautiful replica of the famous classic convinces with numerous elaborate details and agile flight characteristics. A great model for comfortable or fast aerobatics.Features:stable and light wooden construction elaborate scale detailsoptionally for electric or combustion driveAccessories incl. pilot bust and illustrated instructions "Seagull-Models" / "SG-Models" are inexpensive models mostly made of wood with an excellent price/performance ratio! The product line includes many beautiful and unusual aircraft types that bring variety to every airfield. Almost all models can be used with both combustion and electric drives. The required accessories are included in the scope of delivery for these models. All models are supplied with comprehensive, illustrated and easy-to-understand English assembly instructions. The high degree of prefabrication enables a short remaining assembly time. All models are subjected to extensive flight tests before series production and therefore have very good flight performance. SEA278
-17%
Seagull Models ( SG-Models ) CHRISTEN HUSKY 2,0M ARF with flaps, electric/glow engine
€349.99*
€419.99*
(16.67% saved)
Product no.:
9707234
Manufacturer no.:
SEA180
"Seagull-Models" / "SG-Models" are inexpensive models mostly made of wood with an excellent price/performance ratio! The product line includes many beautiful and unusual aircraft types that bring variety to every airfield. Almost all models can be used with both combustion and electric drives. The required accessories are included in the scope of delivery for these models. All models are supplied with comprehensive, illustrated and easy-to-understand English assembly instructions. The high degree of prefabrication enables a short remaining assembly time. All models are subjected to extensive flight tests before series production and therefore have very good flight performance. SEA180
-57%
JTA Innovations Extra JD RED /black/white 32" EPP 3D Aerobatic Model
€29.99*
€69.99*
(57.15% saved)
Product no.:
9781952
Manufacturer no.:
A416-R/B/W
From drawing, scaling, flight testing, etc., the Extra JD is the product of worldwide team collaboration. We are confident that this product will bring joy and satisfaction to many outdoor and indoor RC pilots around the globe. Along with the rest of our current JTA Innovations lineup, the Extra JD is constructed with 6mm EPP and showcases a next-gen carbon fiber construction that has been tested and approved by many top pilots including former ETOC competitors. In the air, the Extra JD will provide a stable yet aggressive feel that won’t disappoint even the most demanding pilots. Characteristics such as a rapid roll rate without a noticeable amount of drag, insane rudder authority, solid and floaty high alpha tendencies, smooth tracking, and more are going to set the Extra JD a part. On the ground, the sleek lines are certainly noticed. The color scheme designed by Alex Ames matches the attitude of the airplane perfectly. A carbon fiber texture will be noticed when looking at the black portions of the scheme.Wingspan- 32” (6mm EPP)Weight- Approximately 175-195gMotor- T-Motor AT2303 or 2304 or equivalentESC- 10-15amp (T-Motor AT12A available at JTA)Servos- 7g-12g (Spektrum A3030, MKS HV6100, EMax ES08, JR E397, etc.)Prop- 8”-9” (8” for 3S setup, 9” for 2S setup)Battery- 350-800mah 2S or 3S depending on motor/ESC combo max cell capabilities Note: JTA models do NOT come with assembly instructions! However, these are available in the download area! A416-R/B/W
-57%
PLANET-HOBBY REPLACEMENT BLADES FOLDING PROPELLER 11/8 PH
€2.99*
€6.99*
(57.22% saved)
Product no.:
77267
Manufacturer no.:
11X8
Low-priced folding propeller made of plastic for standard drives. Note: this propeller is not approved for very powerful drives! 11X8
-25%
Robbe Modellsport Aluminium spinner 25/3.17mm, black anodized 5mm blade mount
€11.20*
€14.99*
(25.28% saved)
Product no.:
9789083
Manufacturer no.:
268707
268707
-67%
Robbe Modellsport Spare blades 6x3 plastic, 5mm root
€1.99*
€5.99*
(66.78% saved)
Product no.:
9789084
Manufacturer no.:
268708
268708
-22%
Kuza Wheel axles 3.5x29mm stainless steel total length 39mm, for 18mm wheel width, 5mm thread 2pcs.
€6.99*
€8.99*
(22.25% saved)
Product no.:
9788647
Manufacturer no.:
KA07NH
Weight: 8 g/kit KA07NH
-50%
Kuza Rods 3x60mm stainless L/R thread 4pcs. 4.5mm hexagon
€4.99*
€9.99*
(50.05% saved)
Product no.:
9788653
Manufacturer no.:
KA10CB2
KA10CB2
-42%
Kuza Rods 3x112mm stainless steel L/R thread 4pcs. 4.5mm hexagon
€6.99*
€11.99*
(41.7% saved)
Product no.:
9788655
Manufacturer no.:
KA10CB7
KA10CB7
-46%
Robbe Modellsport Wingtips Sapphire ARF 2,8m
€15.00*
€27.99*
(46.41% saved)
Product no.:
9781097
Manufacturer no.:
267706
267706
-38%
Robbe Modellsport Wing set l/r Sapphire 2,8m without servos
€149.99*
€239.99*
(37.5% saved)
Product no.:
9781092
Manufacturer no.:
267701
267701
-28%
Robbe Modellsport V-tail Sapphire ARF 2,8m
€28.60*
€39.99*
(28.48% saved)
Product no.:
9781094
Manufacturer no.:
267703
267703
-25%
Robbe Modellsport Fuselage Sapphire ARF 2,8m without electronics
€149.99*
€199.99*
(25% saved)
Product no.:
9781093
Manufacturer no.:
267702
267702
-35%
Robbe Modellsport Canopy Sapphire ARF 2,8m
€15.00*
€22.99*
(34.75% saved)
Product no.:
9781095
Manufacturer no.:
267704
267704
-58%
Robbe Modellsport Wingjoiner carbon Sapphire ARF 2,8m
€8.30*
€19.99*
(58.48% saved)
Product no.:
9781096
Manufacturer no.:
267705
267705
-67%
MEJZLIK Reduzierhülse 6/4 - 3,5mm
€3.00*
€9.00*
(66.67% saved)
Product no.:
9788039
Manufacturer no.:
1340
1340
-67%
MEJZLIK Reduzierhülse 8/6 - 3,5mm
€3.00*
€9.00*
(66.67% saved)
Product no.:
9788038
Manufacturer no.:
1336
1336
-69%
Robbe Modellsport Center part LS 3223/10, 20mm, 2,5°, 4mm
€2.80*
€8.99*
(68.85% saved)
Product no.:
9784444
Manufacturer no.:
58322000
58322000
-69%
Robbe Modellsport Center part LS 3522/5, 20mm, 2,5°, 5mm
€2.80*
€8.99*
(68.85% saved)
Product no.:
9784445
Manufacturer no.:
58332000
58332000
-68%
Robbe Modellsport Middle part LS 5030/14;LS 6330/15, 30mm, 2,5°, 6mm
€3.20*
€9.99*
(67.97% saved)
Product no.:
9784447
Manufacturer no.:
58352000
58352000