mipa RAL 9005SM Black silk matt 1K acrylic paint spray 400ml

Product number: 9793622
Manufacturer number: 214009005SM
GTIN/EAN: 4016176261844


In stock. Usually ships within 1 business day.

Description "mipa RAL 9005SM Black silk matt 1K acrylic paint spray 400ml"

Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Greece, Hungary, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Serbia,  Slovakia, Slovenia, Spain, and the United Kingdom!

Intended use
Mipa Lack Spray "RAL COLOR" is a high-quality acrylic paint in standard RAL colours. Ensures colour-matched paintworks and touch-ups in RAL colours. Suitable for all substrates. Especially suitable for refinishing machines, machinery parts, tools, vehicles, etc.

  • Fast-drying
  • Excellent hiding power
  • Lightfast and non-yellowing
  • High surface hardness Scratch- and shock-resistant
  • Highly pigmented, pure 1K acrylic quality
  • glossy except matt and silk matt (see item description)

Processing instructions:

Fully cured and sanded old paintworks, well dried Mipa 1K and 2K filler materials.

Pre-treatment / cleansing
Pre-clean with Mipa Silikonentferner. Please refer to the section “Substrate preparation“ for detailed information.

Before use, shake can vigorously for 1 - 2 minutes!

Spray to test - spray distance approx. 20 - 30 cm 2 - 3 coats, dry film thickness: 40 - 50 ?m

Flash-off time
3 - 5 min between coats

After use
After use, turn can upside down and spray until the valve is clean, this prevents the valve from clogging up.

Drying times at 20 °C
  • Dust dry after approx. 5 - 10 min
  • Set to touch after approx. 20 - 30 min
  • Ready for assembly after approx. 12 h

Processing conditions
From +10 °C and up to 80 % relative air humidity. Ensure adequate air ventilation.

Can be stored for 2 years in cool and dry places.

EU limit value for this product (cat. B/e): 840 g/l
This product contains max. 700 g/l of VOC.

Substrate preparation:

Remove old coatings or primers that have not cured or are not sound.
Do not use on thermoplastic substrates.

Intact, sound old paintworks, factory paintings:
1. Pre-clean with Mipa Silikonentferner.
2. Then sand with P 400 - 500.
3. Afterwards, degrease with Mipa Silikonentferner.

Cathodic e-coating / shop primer:
1. Pre-clean with Mipa Silikonentferner.
2. Then sand with MP Softpad Superfine or with P 400 - 500.
3. Afterwards, degrease with Mipa Silikonentferner.

2.2 Label elements 3/2021
· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.

· Signal word Danger
· Hazard-determining components of labelling:
n-Butyl acetate
2-Methoxy-1-methylethyl acetate

· Hazard statements
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

· Precautionary statements
P101 If medical advice is needed, have product container or label at hand
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

· Additional information:
EUH066 Repeated exposure may cause skin dryness or cracking.
Buildup of explosive mixtures possible without sufficient ventilation.

· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.

Technical data
Content: 400 ml
Untergrund: Universal
Besondere Kennzeichnung: EUH066
Color: Black Matt
Gefahrenhinweise: H220, H222, H223, H224, H225, H226, H228, H229, H280, H319, H336
Art: Spray
Sicherheitshinweise: P101, P102, P103, P210, P211, P251, P305, P351, P338, P410, P412, P501
Piktogramme: GHS02, GHS07