NEWS

46341

46307

46308

A85061

Plastic mounting frame for XT90 sockets. The mounting frames can be fixed in the model with the screws supplied. A85100

Plastic mounting frame for XT90 connectors. The mounting frames can be fixed in the model with the screws supplied. A85089

Plastic mounting frame for XT30 connectors. The mounting frames can be fixed in the model with the screws supplied. A85103

Our soldered connectors are - simply put - a piece of heat shrinkable tubing in which a soldering sleeve or solder ring is located.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, fast solution for tensile cable connections - Available in 4 different dimensions.Technical dataShrinkage rate 3:1Continuous operating temperature IEC 216 -40°C to +110°CTensile strength 11.5 mPaElongation at break 250%Shrink temperature +110°C to 200°C C5536

Our soldered connectors are - simply put - a piece of heat shrinkable tubing in which a soldering sleeve or solder ring is located.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, fast solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5528

Our soldered connectors are - simply put - a piece of heat shrinkable tubing in which a soldering sleeve or solder ring is located.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, fast solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5532

Soldering and shrinking without a soldering iron in one operation!Our soldering connectors are - simply put - a piece of shrink tubing containing a soldering sleeve or soldering ring.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, quick solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5530

Soldering and shrinking without a soldering iron in one operation!Our soldering connectors are - simply put - a piece of shrink tubing containing a soldering sleeve or soldering ring.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, quick solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5531

MPX boards 6-pin e.g. suitable for assembling MPX plugs and sockets. A86012

MPX housing with safety clips for attaching MPX plugs. E.g. suitable for battery connections. 725110

725100

MPX board Adapter board , which enables the direct soldering of the MPX plugs/sockets. The individual cables (e.g. servo cables) can then simply be soldered onto the large solder pads. A suitable heat-shrink tubing (item no. A84025) is sufficient for insulation. Especially suitable for the production of the servo supply for surface connectors. In combination with the MPX housings included in the MPX connector sets (article no. A85020 or A85021), there is even no need to glue them to the housings, as the circuit board fixes the high-current connector firmly in the housing by soldering. Suitable for the MPX connectors, this board is 1.6mm thick. A86010-4-PINS

MPX board Adapter board , which enables the direct soldering of the MPX plugs/sockets. The individual cables (e.g. servo cables) can then simply be soldered onto the large solder pads. A suitable heat-shrink tubing (item no. A84025) is sufficient for insulation. Especially suitable for the production of the servo supply for surface connectors. In combination with the MPX housings included in the MPX connector sets (article no. A85020 or A85021), there is even no need to glue them to the housings, as the circuit board fixes the high-current connector firmly in the housing by soldering. Suitable for the MPX connectors, this board is 1.6mm thick. A86010/832

Soldering boards 8-pole e.g. suitable for assembling plugs and sockets (article no. 9710353 or 9710356, not included in delivery). A85315

Features:- Locking clip for the MPX high current connector system - The housing is simply attached to a bulkhead or similar with small screws - An optionally mountable bevelled mounting plate makes it easier to remove the connector - The perfect protection against vibrations! A86013

- L/W/H: 25.4/15.5/- mm- Cable holder-Ø-W/H: 11.6/7.8 mm Material: Nylon 66Colour: naturalTemperature range: -30°C - 85°CAdhesive film: -30°C - 104°Cflammable according to UL94V-2 X7062-11

- L/B/H: 13/13/3.2 mm Material: Nylon 66Colour: naturalTemperature range: -30°C - 85°CAdhesive film: -30°C - 104°Cflammable according to UL94V-2 X7063-13

- L/W/H: 19.1/19.1/15.1 mm- Cable holder-Ø: 9,5 mm - Material: PVC- Colour: grey- Temperature range: 0°C - 50°C- Adhesive film: -40°C - 90°C- flammable according to UL94V-2 X7061-9

Mit Hilfe dieser Steckerplatine bringen Sie auf einfache Weise System in Ihre Modelle. Ideal für Steckverbindungen zu Flächenservos, z.B. im F3J oder F3B Segler. Und so gehts: Multiplex Hochstromstecker oder -buchse mit der Steckerplatine verlöten, Kabel anlöten und das Ganze nun komfortabel an einer geeigneten Stelle mit zwei Schrauben befestigen. 9002

Mounting frame especially for the green or red high current plugs, e.g. for charging sockets. The cover frame is available as an option. Simply screw into the fuselage, insert the high current plug and secure with a drop of superglue. If it is not intended as a servo connection, use the short version.Height 11 mm 50048

Mounting frame for the green or red high current plugs, e.g. for the wing connection. Simply screw into the surface and the fuselage, insert the multiplex plug and secure with a drop of superglue.Height 6 mm 50047

Der Sicherungsklipp für die Multiplex-Hochstromstecker lässt sich auf alle Hochstromstecker montieren. Den Sicherungsklipp einfach über den Hochstromstromstecker schieben, mit Sekundenkleber sichern, fertig! 9010

Holder for multi-connector for installation in the fuselage or in the wing root. Application: Surface connector, power supply, charging socket. Contents without multi-connector. 89793000

00704

00704

A85011