- AIRPLANES
- DRONES & HELICOPTERS
- CARS & BOATS
-
RC ELECTRONICS
- TRANSMITTERS
- Servos & Accessories
- SIMULATORS
- SOUND & LIGHTING
-
CABLES & CONNECTORS
- Servo Connection Cables
- Servo Cables per Meter
- V-(Y)-Cables for Servos
- Extension Cables for Servos
- Connectors for Batteries & ESCs
- Connectors for Servos & Receivers
- Charging cables
- Adaptor cables
- Accessories for Servo Cables and Connectors
- Shrinkage hoses
- Switch cables
-
Silicon High Current Cables
- Receiver Connection Cables
- Accessories for High Current Cables & Connectors
- FPV EQUIPMENT
- POWER SUPPLY & BUS SYSTEM
- CHARGERS & POWER SUPPLIES
- BATTERIES
- SUPPLIES & MISC
- NEW
- SALE
- RC Blog
- BRANDS
Filter
–
MULDENTAL Buchsenkabel 2-polig PH 0,25mm² 30cm
€1.99*
Product no.:
9798822
Manufacturer no.:
58868
58868
POWERBOX SYSTEMS MPX EXTENSION, SOCKET AND PLUG, CABLE 1.00MM², LENGTH 20CM
€11.00*
Product no.:
9776666
Manufacturer no.:
1124/20
The PowerBox PIK connector range combines tried and tested connector systems from the modelling sector with modern hot-melt technology.The cables are soldered in our factory and then checked by a second employee for correct polarity and perfect workmanship. The cable is then placed in a specially made injection mould and welded with a special plastic at 220°C and 10bar pressure.This process permanently seals and relieves the strain on the soldered joints. Neither mechanical stress nor environmental influences such as moisture or heat can negatively affect this connection. The plastic is resistant to vibration, oxidation, oils, acids, alkalis and fuels, and is also temperature-resistant from -30°C to +90°C.Features- High-strength insulation of the solder joints- Excellent long-term use properties- no oxidation of the solder joints possible- vibration protection- kink protection- Resistant to chemical influences- temperature resistant from -30°C to +90°C 1124/20
MODELLBAU LINDINGER SILICONE CABLE 6MM² RED / BLACK 1M EACH
€11.99*
Product no.:
93171
Manufacturer no.:
30022-2
highly flexible, especially suitable for high currents, e.g. during E-flight, temperature range from -100 to +300 degrees C, largely resistant to chemical influences or contact with the soldering iron. 30022-2
POWERBOX SYSTEMS DEANS-PIK PLUG WITH CABLE 2,5MM² 30CM
€6.60*
Product no.:
81476
Manufacturer no.:
1307/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1307/30
POWERBOX SYSTEMS DEANS-PIK PLUG WITH CABLE 1,5MM² 30CM
€6.00*
Product no.:
81471
Manufacturer no.:
1306/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1306/30
-41%
POWERBOX SYSTEMS DEANS-PIK SOCKET WITH CABLE 1,5MM² 30CM
€3.53*
€6.00*
(41.17% saved)
Product no.:
81470
Manufacturer no.:
1406/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1406/30
POWERBOX SYSTEMS MULTIPLEX-PIK EXTENSION 2,5MM² 40CM
€15.40*
Product no.:
81469
Manufacturer no.:
1127/40
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1127/40
POWERBOX SYSTEMS MULTIPLEX-PIK EXTENSION 2,5MM² 30CM
€14.30*
Product no.:
81468
Manufacturer no.:
1127/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1127/30
POWERBOX SYSTEMS MULTIPLEX-PIK EXTENSION 2,5MM² 20CM
€13.20*
Product no.:
81467
Manufacturer no.:
1127/20
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1127/20
POWERBOX SYSTEMS MULTIPLEX-PIK EXTENSION 1,5MM² 30CM
€13.20*
Product no.:
81465
Manufacturer no.:
1126/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1126/30
POWERBOX SYSTEMS MULTIPLEX-PIK EXTENSION 1,5MM² 40CM
€14.30*
Product no.:
81466
Manufacturer no.:
1126/40
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1126/40
POWERBOX SYSTEMS MULTIPLEX-PIK EXTENSION 1,5MM² 20CM
€12.10*
Product no.:
81463
Manufacturer no.:
1126/20
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1126/20
POWERBOX SYSTEMS MULTIPLEX-PIK SOCKET 1,5MM² 30CM WITH CABLE
€6.00*
Product no.:
78164
Manufacturer no.:
1206/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1206/30
POWERBOX SYSTEMS MULTIPLEX-PIK PLUG 1,5MM² 30CM WITH CABLE
€6.00*
Product no.:
78163
Manufacturer no.:
1106/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1106/30
POWERBOX SYSTEMS MULTIPLEX-PIK PLUG 2,5MM² 30CM WITH CABLE
€7.20*
Product no.:
78161
Manufacturer no.:
1107/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1107/30
POWERBOX SYSTEMS MULTIPLEX-PIK SOCKET 2,5MM² 30CM WITH CABLE
€6.60*
Product no.:
78162
Manufacturer no.:
1207/30
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1207/30
POWERBOX SYSTEMS MULTIPLEX-PIK PLUG 1MM² 40CM WITH CABLE
€5.50*
Product no.:
73497
Manufacturer no.:
1104/40
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1104/40
POWERBOX SYSTEMS MULTIPLEX-PIK SOCKET 40CM 1MM²
€5.50*
Product no.:
73498
Manufacturer no.:
1204/40
PIK safety plug-in system from PowerBox Systems!Molded by means of "hot melt" process. Only original plugs are used. The finished soldered and tested plug is pressed in a special process. The result is an incredibly stable, robust and durable connector system. The injection molded molding has recessed grips and is convenient and practical for safe plugging and unplugging. With the safety clip, in conjunction with the MPX contacts, an absolutely safe plugging. 1204/40
MODELLBAU LINDINGER SILICONE CABLE 0,75MM² RED / BLACK PER 1M
€2.99*
Product no.:
44422
Manufacturer no.:
30013
highly flexible, especially suitable for high currents, e.g. during E-flight, temperature range from -100 to +300 degrees C, largely resistant to chemical influences or contact with the soldering iron. 30013
MODELLBAU LINDINGER SILICONE CABLE 1,5MM² RED / BLACK JE 1M
€3.99*
Product no.:
20480
Manufacturer no.:
16802-2
highly flexible, especially suitable for high currents, e.g. during E-flight, temperature range from -100 to +300 degrees C, largely resistant to chemical influences or contact with the soldering iron. 16802-2
MODELLBAU LINDINGER SILICONE CABLE 2,5MM² RED / BLACK JE 1M
€4.99*
Product no.:
20479
Manufacturer no.:
16445-1/16445-2
highly flexible, especially suitable for high currents, e.g. during E-flight, temperature range from -100 to +300 degrees C, largely resistant to chemical influences or contact with the soldering iron. 16445-1/16445-2
MODELLBAU LINDINGER SILICONE CABLE 4MM² RED / BLACK 1M EACH
€9.99*
Product no.:
11675
Manufacturer no.:
30021-2
highly flexible, especially suitable for high currents, e.g. during E-flight, temperature range from -100 to +300 degrees C, largely resistant to chemical influences or contact with the soldering iron. 30021-2
Robbe Modellsport HIGH CURRENT FEMALE CABLE 12AWG/3,3MM² 10CM 1PCS
€2.99*
Product no.:
9762213
Manufacturer no.:
46160
46160
Robbe Modellsport HIGH CURRENT MALE CABLE 12AWG/3,3MM² 10CM 1PCS
€2.99*
Product no.:
9762212
Manufacturer no.:
46159
46159
Robbe Modellsport SILICON CABLE 18AWG/0,8MM² RED/BLACK EACH 1 METER
€3.99*
Product no.:
9762191
Manufacturer no.:
46138
46138
Robbe Modellsport SILICON CABLE 16AWG/1,6MM² RED/BLACK EACH 1 METER
€3.99*
Product no.:
9762190
Manufacturer no.:
46137
46137
Robbe Modellsport SILICON CABLE 14AWG/2,1MM² RED/BLACK EACH 1 METER
€4.99*
Product no.:
9762189
Manufacturer no.:
46136
46136
Robbe Modellsport SILICON CABLE 10AWG/5,2MM² RED/BLACK EACH 1 METER
€8.99*
Product no.:
9762188
Manufacturer no.:
46135
46135
SPEKTRUM IC5 Device Connector 4" / 100mm; 10 AWG
€10.99*
Product no.:
9791577
Manufacturer no.:
SPMXCA510
SPMXCA510
SPEKTRUM IC5 Battery Connector with 4" Wires 10 AWG
€10.99*
Product no.:
9784253
Manufacturer no.:
SPMXCA505
SPMXCA505