AERONAUT LT 200 Flex Wooden Kit
Product number:
9762009
Manufacturer number:
132800
GTIN/EAN:
4012230114668
€99.00*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
Downloads
Description "AERONAUT LT 200 Flex Wooden Kit"
The LT 200 Flex offers full flexibility when building a model aircraft. From the kit, you can choose between a glider model or a
electric glider model. For a motor drive, the appropriate frame sets are included, for the glider variant, a beautifully designed
Nose made of balsa.
As control variants three options can be built with this model - with pure 2-axle control over height/side, as 3-axle control over height/side, as 3-axle control over the nose.
Control with additional ailerons or as 4-flap wing with camber/brake flaps. The LT 200 Flex can therefore be used as a RES model or as a
fully equipped thermal glider from the kit.
The construction is based almost entirely on wood, with the exception of the fuselage boom made of thin-walled CFRP. The hull
is built up in a layered construction from lasered wooden parts. The wings are made of a rib construction which is easy to build.
and completely planked, which eliminates the need for covering with foil.
The wing profile allows a very slow flying style and allows the use of thermal and updraft even at low altitudes.
The airbrakes allow a vertical descent without any significant increase in airspeed.
LT 200 Flex not only appeals to experienced model pilots who have always wanted to have a multi-flap wing for comfortable flying,
but also young model builders, who have already made their first experiences in building wooden models (e.g. with the Lilienthal 40 RC) and
now want to go higher. Due to the intuitive design and youth-friendly construction manual, this model is also suitable for assemblies in
Associations, e.g. as a joint winter construction project.
- Span width [mm] 1,920
- Length [mm] 1,120
- Weight [g] > 850
- Wing area [dm²] 30.2
- Wing loading [g/dm²] 28
- RC functions Elevator, aileron, rudder, airbrakes, engine controls
electric glider model. For a motor drive, the appropriate frame sets are included, for the glider variant, a beautifully designed
Nose made of balsa.
As control variants three options can be built with this model - with pure 2-axle control over height/side, as 3-axle control over height/side, as 3-axle control over the nose.
Control with additional ailerons or as 4-flap wing with camber/brake flaps. The LT 200 Flex can therefore be used as a RES model or as a
fully equipped thermal glider from the kit.
The construction is based almost entirely on wood, with the exception of the fuselage boom made of thin-walled CFRP. The hull
is built up in a layered construction from lasered wooden parts. The wings are made of a rib construction which is easy to build.
and completely planked, which eliminates the need for covering with foil.
The wing profile allows a very slow flying style and allows the use of thermal and updraft even at low altitudes.
The airbrakes allow a vertical descent without any significant increase in airspeed.
LT 200 Flex not only appeals to experienced model pilots who have always wanted to have a multi-flap wing for comfortable flying,
but also young model builders, who have already made their first experiences in building wooden models (e.g. with the Lilienthal 40 RC) and
now want to go higher. Due to the intuitive design and youth-friendly construction manual, this model is also suitable for assemblies in
Associations, e.g. as a joint winter construction project.
- Span width [mm] 1,920
- Length [mm] 1,120
- Weight [g] > 850
- Wing area [dm²] 30.2
- Wing loading [g/dm²] 28
- RC functions Elevator, aileron, rudder, airbrakes, engine controls
Technical data
| Wing-span (mm): | 1920 |
|---|---|
| Flight weight approx. (g): | 850 |
| Control: | H,S,Q,M,BK |
| Length (mm): | 1120 |
| Manufacturer: | Aeronaut |
| Fuselage: | Wood |
| Wings: | Wood/rib construction |
| Rec. engine: | BL Outrunner |
| Version: | KIT |
| Flight Skill: | Beginners |
| Build Skill: | Advanced |
| Drive Type: | Electric |
Box contents
- All precisely lasered wooden parts for the superstructure, as well as small parts for the rudder linkage, wing attachment, servo board, slipway for the
- Construction of fuselage and wings, building instructions with 3D step-by-step construction drawings.
- Construction of fuselage and wings, building instructions with 3D step-by-step construction drawings.
Das Produkt LT 200 FLEX HOLZBAUSATZ von AERONAUT in der Kategorie Electric Glider Models hat eine Spannweite von 1920 sowie ein Gewicht von 850. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,BK. Das Modell ist als KIT ausgeführt . Wir empfehlen einen Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar
Over the past 30 years, the company Aeronaut has been distributed from Modellbau Lindinger due to high quality products and services. The name "Aeronaut", based from the Greek Symbol for air and water, was chosen for the company in the 1970's as they stepped into the RC industry. Aeronaut is well known for self-designed and manufactured products, for example, the CAMCarbon Folding Propeller.