RC-Factory Laser XL EPP 1060mm Red
Product number:
9800116
Manufacturer number:
T77
Downloads
Description "RC-Factory Laser XL EPP 1060mm Red"
A very popular category for us is the XL. All XL size aircraft have very advanced flight characteristics already, inertia like a construction aircraft and yet it is still made of EPP which is almost unbreakable in these dimensions. This gives the pilot the opportunity to learn all the autorotation figures without worrying about destroying his model.
An incredible advantage of this design is its resistance to mechanical damage while being resistant to inclement weather. The Laser XL has a flying weight of just under 800g, meaning that even winds of greater force are hardly noticeable on the model.
After many tests, we have proven a completely new wing concept in this category. At the fuselage the wing is glued with its whole contact area to the spine, this makes the model even stronger and at the same time due to the balancing flap at the end of the aileron the model is more controllable and at the same time the load on the servo is slightly reduced.
This time there is no fully-moving elevator on the model, due to maintaining the highest durability. The Laser XL is still very maneuverable over the elevator, due to the correct layout of the model surfaces.
An incredible advantage of this design is its resistance to mechanical damage while being resistant to inclement weather. The Laser XL has a flying weight of just under 800g, meaning that even winds of greater force are hardly noticeable on the model.
After many tests, we have proven a completely new wing concept in this category. At the fuselage the wing is glued with its whole contact area to the spine, this makes the model even stronger and at the same time due to the balancing flap at the end of the aileron the model is more controllable and at the same time the load on the servo is slightly reduced.
This time there is no fully-moving elevator on the model, due to maintaining the highest durability. The Laser XL is still very maneuverable over the elevator, due to the correct layout of the model surfaces.
- wingspan: 1060 mm
- lenght: 1120 mm
- flight weight: 750 - 820 g
- engine: 100 - 120g
- controller: 40-50A / 4s
- servos: 4x 14 - 18g
- battery: 3s - 4s 1300 - 1800mAh
- propeller: 10 - 11 inches
Technical data
| Wing-span (mm): | 1060 |
|---|---|
| Flight weight approx. (g): | 820 |
| Empty weight approx. (g): | 750 |
| Control: | H,S,Q,M |
| Length (mm): | 1120 |
| Manufacturer: | RC Factory |
| Fuselage: | EPP |
| Wings: | EPP |
| Rec. Battery: | 3s - 4s 1300 - 1800mAh |
| Version: | KIT |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
Box contents
- Kit including landing gear, without equipment set
Recommended equipment sets
- motor, servos, ESC, propeller, batteries
Das Produkt Laser XL EPP 1060mm Rot von RC-Factory in der Kategorie 3D & Aerobatic Airplanes hat eine Spannweite von 1060 sowie ein Gewicht von 820. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M*. Das Modell ist als KIT - BAUSATZ ausgeführt . Wir empfehlen einen 3s - 4s 1300 - 1800mAh Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar