NEWS

The Spektrum™ S100 Smart USB-C Charger provides fast, easy charging for all modelers, especially using Smart batteries — with Auto Charge simplicity, one-connection balancing, IC3® or IC5® output ports for adapter-free convenience, and more.Key FeaturesCapable of delivering up to 100W of charging power with compatible power supply and USB-C CableCharges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead neededAuto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connectedIncludes IC3® and IC5® charging output ports — no separate adapters required to charge different Spektrum™ Smart batteriesCan also be used to charge many standard hobby 1S-4S LiPo, LiIon, LiHV, LiFe, and 1C - 12C Smart NiMH batteries. Note: The S100 will not charge non-Smart NiMH brand batteries.Accepts firmware updates via USB-C portColor LED screen and three button interface makes charging and checking on a battery's status simpleIntroductionThe S100 Smart USB-C Charger — from the new generation of Spektrum™ Smart electronics — brings today's most advanced and user-friendly charging technology to RC pilots and drivers of all skill levels.FeaturesAdvanced, user-friendly Smart charging technology that fits into any hobby budgetMeter display shows available wattage on startup, making it easy to know how much power your USB power supply can deliverDelivers up to 100W of charging power with appropriately rated power supply and USB-C cableCharges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead neededAuto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connectedCharges virtually any RC LiPo battery (use Smart batteries to benefit from all charger features)Smart software tracks and stores numerous smart battery dataIncludes IC3® and IC5® charging output ports — eliminating the need for a separate IC3® or IC5® adapter to charge Spektrum Smart batteriesCharges up to 4S LiPo/LiFe/LiHV batteriesIncludes an efficient, low-noise cooling fanSleek, sturdy case fits well on a workbench and in pit or field bagsIC3® and IC5® connectors are backward compatible with EC3™ and EC5™ connectorsOverviewWith its up to 100W power, new user interface, and ability to fast charge Smart batteries on either the IC3® or IC5® integrated output port, the S100 charger offers a versatile and truly hassle-free charging experience. You can charge virtually any RC battery with the S100 charger. Use it together with Smart batteries, and you'll be amazed by its incredible functionality and performance.The S100 Smart USB-C Charger makes battery charging the easiest it has ever been. Its Auto Charge feature recognizes your Smart battery's parameters, such as chemistry type and charge rate, and begins safe, correct charging automatically when the charge lead is connected.Balancing Smart batteries is just as simple. The S100 charger will balance your Smart G2 packs through the same single IC connection used for charging. No separate, confusing balance leads are required.Powered by an included USB-C cable, the S100 is a convenient charging solution for those new to RC. All you need is a common USB-C power adapter, and you're ready to go.SELECT IC3® OR IC5® CHARGING OUTPUTThe S100 Smart USB-C Charger includes IC3® and IC5® output ports for charging your standard Smart batteries without adapters. Use the slider to select either the IC3® or IC5® port and then charge your battery with up to 100W power. You can charge AND balance Smart batteries with one simple IC3® or IC5® connection — no separate balance lead is required.USB-C INPUT POWER INDICATORThe S100 Smart Charger can be powered by any conventional USB-C cable and USB power supply. The S100 Smart Charger uses USB-C Power Delivery technology to get the most power out of your USB-C Power Supply. During initial power up, the S100 battery level indicator bars will illuminate, indicating the amount of power available from your USB-C power supply. The more wattage from your USB-C, the more powerful your S100 Smart Charger. (USB-C Power Supply not included)COMPACT CASE DESIGNThe charger's sleek case fits perfectly on your workbench and in your pit or field bag. Its power cord is detachable for easy transport. Rubber bottom grips help the charger stay in place as you connect, charge, and disconnect your RC batteries. Update the charger's firmware through the same USB-C power port on the back of the S100 charger.Specifications:DisplayLEDInput VoltageDC 5.0 - 20.0V, USB-CProduct Height1.42" (36 mm)ApplicationRC Model Battery ChargerPeak DetectionYesShort Circuit ProtectionYesConnector TypeIC3, IC5Maximum Charge Rate1A / 2A / 3A / 6A User SelectableProduct Length3.86" (98 mm)Thermal ProtectionYesBattery Balance ConnectorJST-XHBattery Temperature MonitoringYesSelectable Charge RateYesOver Current ProtectionYesBattery TypeLiFe (3.3V per cell), LiHV (3.8V per cell), LiPo (3.7V per cell), Smart NiMH (1.2V per cell)PC ConnectivityYesProgrammableYesIntegrated BalancingYes - Internal Balancer & External AdapterLow Input Voltage ProtectionYesProduct Width2.83" (72 mm)Software UpdatesYesTechnologySmart SPMXC2090

Features:Input type: ACCharging Time: Approx. 5 Hours (eneloop AA x 1 to 8), Approx. 6 Hours (eneloop pro AA x 1 to 8)Accepts Up to 8 x AA, 8 x AAA, Combination of AA/AAA BatteriesIdeal for Commercial and Business Use (Reduce Cost and Save Time)Individual Voltage Control Function for Greater Efficiency8 x LED Indicators (Green Indicates Charging in Progress)Detects voltage and stops charging just after overflow.Auto voltageDimensions: 147 (W) x 119 (L) x 28 (H) mmWeight: 240 g (Excluding AC cord) 148221

The 2x100W Spektrum™ S2100 Smart AC Charger provides easy charging for all modelers, especially using Smart batteries — with Auto Charge simplicity, one-connection balancing, IC3® or IC5® output ports for adapter-free convenience, and more.Key FeaturesUp to 100W power per channel or 200W on one channel for fast chargingCharges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead neededAuto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connectedCharges virtually any RC battery (use Smart batteries to benefit from all charger features)Includes IC3® and IC5® charging output ports — eliminating the need for a separate IC3® or IC5® adapter to charge Spektrum Smart batteriesFeaturesUp to 100W power per channel or 200W on one channel for fast chargingCharges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead neededAuto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connectedCharges virtually any RC battery (use Smart batteries to benefit from all charger features)Smart software tracks and stores numerous smart battery dataIncludes IC3® and IC5® charging output ports — eliminating the need for a separate IC3® or IC5® adapterLarge, 2.4" display screenAn on-screen clock counts down remaining charge time until your Smart battery is fully charged and ready to useUpdated user interface features fresh, intuitive menus, icons and navigation tools, plus non-slip, easy to use buttonsUSB input and output ports are included for updating firmware and charging secondary devicesON/OFF switch eliminates the need to plug in and unplug the power cord for on/off controlDetachable power cord makes transporting more convenientIncludes an efficient, low-noise cooling fanSleek, sturdy case fits well on a workbench and in pit or field bagsHandy rubber grips on case make it easier to plug in and remove batteriesIC3® and IC5® connectors are backwards compatible with EC3™ and EC5™ connectorsNext Generation Charging — "Smart" and State-of-the-ArtThe 2-channel S2100 Smart AC Charger — from the new generation of Spektrum™ Smart electronics — brings today's most advanced and user-friendly charging technology to RC pilots and drivers of all skill levels.With up to 100W power per channel or 200W on one channel for fast charging, plus the ability to charge batteries on either the IC3® or IC5® integrated output ports, the S2100 charger delivers a versatile and truly hassle-free charging experience. The S2100 charger works with virtually any RC battery and is backwards compatible with EC3™ and EC5™ connectors. Use it together with Smart batteries and you'll be amazed by its incredible functionality and performance.The S2100 Smart AC Charger makes battery charging the easiest it has ever been. Its Auto Charge feature recognizes your Smart battery's parameters, such as chemistry type and charge rate, and begins safe, correct charging automatically when the charge lead is connected. A clock on the charger's screen counts down the time until your Smart battery is fully charged and ready to use.Balancing Smart batteries is just as simple. The S2100 charger will balance your Smart LiPo packs through the same, single IC connection used for charging. No separate, confusing balance leads are required.The S2100 Smart AC Charger's updated, improved user interface features fresh, intuitive menus, icons, and navigation tools. Its clear, easily understandable indicators of Smart battery history and performance provide the information you need to make the best decisions about your batteries when putting gear together for a day at the field or track.USB input and output ports enable you to charge secondary devices and to update the charger's firmware so you always have the latest features. The S2100 Smart AC Charger also includes an ON/OFF switch, cooling fan, detachable power cord, and sleek case with rubber grips that fits perfectly on your workbench and in your pit or field bag.SELECT IC3® or IC5® CHARGING OUTPUTThe Spektrum™ S2100 Smart AC Charger includes IC3® and IC5® output ports for charging your Smart batteries without adapters. Use the slider to select either the IC3® or IC5® port and then charge your battery — at up to 100W power per channel or 200W on one channel for fast charging. You can charge AND balance Smart G2 batteries with one simple IC3® or IC5® connection. No separate balance lead is required.IMPROVED USER INTERFACETo provide the easiest, most helpful, and most hassle-free charging experience, the S2100 AC charger includes a large, 2.4" display and updated user interface with improved menus, icons, and navigation tools — plus non-slip, easy to use buttons. For maximum safety, simplicity, and charging ease, the Auto Charge feature recognizes Smart battery charging parameters as soon as you connect your pack and begins proper charging automatically.CHARGE TIME REMAINING CLOCKIn real time, a clock on the S2100 AC charger's screen counts down the minutes until your Smart battery is fully charged and ready to be used.IMPROVED CASE DESIGNThe charger's sleek case fits perfectly on your workbench and in your pit or field bag. Its power cord is detachable for easy transport. Rubber grips help you hold the charger securely while connecting and removing batteries. USB input and output ports enable you to update charger firmware and to charge secondary devices. Other features include a built-in ON/OFF power switch and low-noise cooling fan.Product Specifications:Integrated BalancingYes - Internal Balancer & Internal AdapterNormal/Standard Charge Rate0.1 - 12.0A, adjustable in 0.1A increments (200W Max)Product Width5.7" (145 mm)Software UpdatesYesTechnologySmartDisplay2.4" 320 x 240 IPS LCDAmp MeterYesApplicationRC model battery chargerOutput ConnectorIC3 and IC5 selectablePeak DetectionYesProduct Weight2.4 Lb (1070 g)Short Circuit ProtectionYesInput Voltage100 - 240V AC, 50 - 60 HzBattery TypeLiFe (3.3V per cell),LiHV (3.8V per cell),LiIon (3.3V per cell),LiPo (3.7V per cell),NiCd (1.2V per cell),NiMH (1.2V per cell),Pb (2.0V per cell)Product Height4.1" (104 mm)PC ConnectivityYesProgrammableYesSafety TimerYesOver Current ProtectionYesBattery Balance ConnectorJST-XHBattery Temperature MonitoringYesCharge Protection CircuitryYesNumber of Cells1 - 6S Li-Ion/LiPo/LiFe, 1 - 16S NiCd/NiMH, 1 - 12S PbSelectable Charge RateYesVoltage MeterYesConnector TypeIC3,IC5Discharge0.1 - 1.5A, adjustable in 0.1A increments (15W Max)Maximum Charge Rate12.0A (200W Max)Product Length5.7" (145 mm)Reverse Polarity ProtectionYesThermal ProtectionYes SPMXC2000I

Specifications:Input voltage: 100-240 V, 50/60 Hz (AC)Charging current: 1000mA / 8.4VBattery types: 6 cell 7.2V NiMHTechnical details:Auto power off after chargeSuitable for NiMH 6-cell batteries with 7.2 VTAMIYA connector 500606072

Features:200W Ultra-high-power4+1 independent channelPD 3.1Two-screen linkageAPP connection, handy operationQuick charging protocolUltra-high-power 200WLCD color display, Real-time powerMake your desk neatly. Adapters, wires and devices do not mess up any more, free you up a comfortable office space.Independent each other, Individual quick charger.Independent quick charging means that each channel is always charging quickly and separately without power reduction, even if each devices are being charged on the adapter at the same time.Adapters that are sharing quick chargingdespite single-channel charging can satisfy quick charging, once devices are added, all ports will down to slow charging immediately.Magnetic wireless chargingWireless charge can be automatically aligned by Magnetic attraction. Just put your phone down and it will start charge.* The wireless charging function works with devices that support wireless charging, Magnetic attraction only works with iPhone 13, iPhone 13 Mini, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max and AirPods Pro, AirPods?3rd generation?.Read real-time power, on a color display. Visualize the charging process through UI, the working status on each channel, the real-time power. All are visible at a glance.Big show from small oneThe APP connection makes your mobile phone a second operation screen, check the real-time charging progress, export the instantaneous power table, and the OTA upgrade are all by your hand.Cold enough, cool enough.With a silent turbo fan, the temperature plummets by 30°. Make it cold enough to run with full power, durability and stability. We let long-lasting high-power charging really achieved on using.Specifications:Input Voltage range: AC100~240VUSB-A supported quick charging protocols: QC3.0/QC2.0USB-A output voltage range: 5-12VUSB-A maximum output power: 24WUSB-C output voltage range: 5V~20VUSB-C maximum output power: 65WXINGLINK interaction technology: unsupportedWireless charging maximum output power: 15WTotal output power: 200WWorking temperature: 0~40°CStorage temperature: -20°C~60°CSize: 105x105x40.6 mmWeight: 430gUSB-C supported quick charging protocols: PD3.0/PD2.0/PPS,QC4+/QC4/QC3.0/QC2.0,AFC, FCP, SCP,PE2.0/PE1.1,SFCP, BC1.2Power distribution: Wireless charging: 15WUSB-A output: Max 24WUSB-C output: Max 65W (C1, C2, C3)(Power intelligent distribution) Power200

Einzelkanalladunglädt 1-4 Mignon AA oder Micro AAA Ni-MH oder Ni-Cd AkkusAusgang 120 mAhWeitbereichseingang 100-240V 1300274

There has never been an easier or safer way to charge your batteries than the Traxxas iD® system. Just plug a Traxxas iD-equipped battery into the EZ-Peak® Plus 4s and press Start - that’s all there is to it! Traxxas pioneered this exclusive iD technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the charger’s settings for the optimal charge. An LED progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. One-button Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. With up to 8 amps of charging power, the EZ-Peak Plus 4s is the fastest, easiest, and most convenient way to charge your Traxxas batteries.Power and ConvenienceThe faster your batteries charge, the sooner you’re back out having fun. No one understands this better than Traxxas which is why we outfitted the EZ-Peak Plus 4s with 8 full amps (75 watts) of charging power. The charger automatically detects the type of iD-equipped battery you are using and then configures the settings for the fastest charge possible. NiMH batteries charge faster than ever with 4 amps of charging power. LiPo batteries charge even faster with up to 8 full amps. A large 40 mm cooling fan keeps the temperatures down inside the charger for powerful charging sessions. A balance port is built into the charger for older-style LiPo batteries with external balance leads. The EZ-Peak Plus 4s combines EZ-Peak power with the safety of Traxxas’ exclusive iD technology in one convenient and easy-to-use package.Features:75-Watt 8-amp high outputEasy to use interface with charge progress indicator and audible alertsAutomatically recognizes Traxxas iD® batteries for optimal charger settingsOptimized for faster LiPo balance chargingOne-button LiPo storage charge protects your battery investmentAdvanced high-resolution peak detection delivers a perfect chargeBuilt-in cooling fanAdvanced Mode for full manual control of charger settingsBuilt-in balance port for conventional LiPo batteriesCharges 5-8-cell NiMH batteriesCharges 2S, 3S, and 4S LiPo Batteries TRX2981G

The NC2200 charger is a compact charger for up to 4 rechargeable NiMH / NiCd batteries in sizes AA or AAA. With four independent slots, the batteries can be charged differently depending on their capacity. And to further increase comfort, the VA display shows the most important data such as the charging current, the battery capacity as well as the internal resistance, the voltage and the remaining time in real-time updates. This is only possible thanks to the extremely powerful Cortex-M3 processor from ARM, which is built into this loader.FlexiPuls is another innovation in the options that the device can offer the user. During the life-time of a battery, for example, the internal resistance increases with each use. This therefore consumes more electricity and also makes the battery get hotter when charging. The FlexiPuls developed by SkyRC prevents this problem by reducing the charging current as soon as the NC2200 reaches a certain internal resistance value. This is not only economical, it is also ecological.However, if that is not enough for You, the SkyCharger smartphone app and the Bluetooth dongle have the option of calling up all the information mentioned, a charging graph and updating the firmware of the device.Features:4 independent charging slots with each 2000mA/2200mA (Turbo)Program to rescue batteriesHigh contrast VA displayInternal resistance measurement incl. FlexiPulseRobust technology in pocket formatAdvanced security features5 charging modus- Turbo (fast charge)- Charge- Discharge- Refresh & Analyse- Break-In SK100181

Technical detailscompact designinput 100-240V 50/60HzOutput 5V max. 2A - 10W 1300494

The Peak Charger charger is designed to quick-charge Ni-MH battery packs with 4-8 cells, such as those used in most remote-controlled models of cars, boats or planes. The intelligent "Delta-Peak" charge switch-off detects a full battery and automatically switches to "trickle charge" mode after a full charge. The battery is therefore not overcharged and retains its state of charge.FeaturesA control LED provides information about the current operating status.The number of cells is set automatically by the charger.Secured against overload and short circuits.Mostly maintenance-free.Technical SpecificationsInput Voltage:AC 100-240V~ 50-60Hz, 0.3AOutput Voltage:14VSupported Battery Types:NiMH 4-8 cellsCharge rate:1000mACharge Control:3-Status LED R01018

Suitable for example:500608132 NiMH 7,2 V / 1500 mAh500608054 NiMH 7,2 V / 2300 mAh Technical data:Input voltage: 100-240 V, 50-60 Hz (AC)Charging current: 500 mA / 8.4 VBattery types: 6 cells 7.2 V NiMH 500606081

As the successor to the e450, this compact and easy to handle loader offers more convenience. Because instead of an inaccurate switch for selecting the charging current, it can now be selected simply by pressing a button. The integrated balancer adjusts the charge current for each individual cell inpiduell to charge the LiPo battery to 100%.The selection as well as the charge state of each individual cell is displayed via the LEDs. So you always have a clear overview. And with the XT60 connector supplied, you can also be sure that the most common battery types are always connected correctly.Features:- Compact, easy to use charger- Suitable for 2S-4S LiPo cells and 6-8 NiMH cells- Connection directly to the socket at a voltage range of 100V to 240V- Suitable for LiPo and NiMH batteries- Load status display:- White (continuous): current selection- White (blinking): current loading progressTechnical data:- Operating voltage: 100-240V- charging current: 1A/2A/3A/4A (+-10%) via button- charging power: 50W- Cell count: 2S/3S/4S LiPo/LiFe/LiHV, 6-8 cells NiMH batteries- Balancer current: 300mA- Display: 8 LEDs- Weight without cable: 191g- Dimensions without cable: 110x70x40mm SK100170-01

The new EZ-Peak® Live Dual iD Charger takes all the advanced features of the EZ-Peak Live and supercharges the power output to over 26 amps (200 watts)! The 4s capable multi-chemistry dual charger uses built-in Bluetooth to work seamlessly with the new Traxxas EZ-Peak Live™ app for iOS and Android. The EZ-Peak Live app gives you detailed information, remote monitoring, and advanced operating functions through the high-definition color interface on your mobile device. It’s the most powerful, most advanced charger in the popular EZ-Peak lineup. Get back in the action sooner with the new EZ-Peak Live Dual Charger!Features:200 Watt 26+ amp outputRecognizes iD-equipped batteries to optimize charger settingsMAXX Charge feature gets you back in the action quicklyOptimized for faster LiPo balance chargingOne button LiPo storage charge protects your battery investmentAdvanced high-resolution peak detection delivers a perfect chargeEasy to use interface with dual LED charge progress indicatorsSupports Traxxas EZ-Peak Live ApplicationAudible alertsDual high-flow cooling fansAdvanced Mode for full manual control through EZ-Peak Live AppLegacy support for all Traxxas High-Current ConnectorsIntegrated dual balance ports for conventional LiPo batteriesBuilt-in 2-amp USB charger output portCharges Dual 5-8-cell NiMH batteriesCharges Dual 2s, 3s, and 4s LiPo BatteriesPatent Pending iD TechnologyThere has never been an easier or safer way to charge your batteries than the Traxxas iD system. Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! Traxxas pioneered this exclusive technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.MAXX PowerFaster charging means more time behind the wheel. The new MAXX Charge feature takes full advantage of LiPo batteries’ high charge rates. Press the MAXX Charge button and the right side charges at the maximum charge rate the battery will allow (up to 16 amps). The left side receives the remaining power until the right side finishes and then the left side switches to MAXX power mode. This innovative design gets one battery ready in nearly half the time so you’re back in the action having fun.Charging FlexibilityThe EZ-Peak Live Dual is a true multi-chemistry charger. The charger automatically detects the type and size of your iD-equipped battery and configures the settings for the fastest charge possible. With 200 watts of power on tap, EZ-Peak Dual maximizes its charging potential for NiMH and LiPo batteries. Even the largest 4-cell LiPo batteries are no problem with up to 16 amps of charging horsepower per side. Two high-flow fans keep the temperature down for extended charging sessions. Dual balance ports provide backwards compatibility for batteries with external balance leads. There’s even a special 2-amp USB output to charge your mobile device. No other charger features EZ-Peak Live’s combination of power and flexibility with iD safety and simplicity.TechnologyTraxxas pushes the technological envelope to provide you the fastest, most convenient charging experience possible. Not only is EZ-Peak Live Dual our most powerful charger ever, it’s also our most advanced. The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors. This is charging the Traxxas way—fast, easy, and more advanced than ever! TRX2997G

A "easy-to-use" charger which is especially suitable for beginners. The uncomplicated setting options make it easy to operate and it`s suitable for LiPo/LiFe and NiMH/NiCd batteries.The unit features a selectable charging rate, delta-peak sensitive cut-off and cell balancing of LiPo/LiFe batteries.AC power cable available with Euro pin plug (4000033) and UK plug (4000033UK) SPECIFICATION:Input voltage: 100-240V ACCharging current: 1.0A / 3.0A / 5.0A (50W)Charging output: 4mm socketsLED for battery type identification and statusLiPo/LiFe batteries: 2-3SNiMH/NiCd: 1-8 cellsBalancing current: 350mAhDelta-peak sensitiveInternal power suplyDimmension: 110x109x49 mmWeight: 490 g 4000033

Product Information "SkyRC T100 AC Charger LiPo 2-4s 5A 2x50W"The SkyRC T100 is a universal AC multifunction charger / discharger that can be used with the most common battery types such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb.With a remarkable 50 Watt charging power per charging channel, the T100 in its compact housing design provides more than sufficient charging power for most applications.Features:- 2 independent charging channels- 2x 50W charging power and maximum 5.0A charging current- Improved display with battery icon and percentage number- 3 decimal places for the voltage display- 10 Profile storage levels- AGM and Pb Cold Charge Mode- Simple operation and menu navigation- XT-60 connector at the charging outputs- Various safety monitoring systemsTechnical data:- Input voltage AC: 100V - 240V- Charging power: 2x 50W- Charge current: 0.1A - 5.0A- Balancer current max: 300mA- Number of cells: LiPo/LiFe/LiIon/LiHV 2s - 4s- Number of cells: NiMH/NiCd 6s - 8s- Pb Battery voltage: 6V - 12V- Weight: 500g- Dimensions: 100x90x127mm SK100162

DESCRIPTIONThis charger can be used to charge special LiPo transmitter batteries which have an integrated balancer (e.g. the MaxPro LiPo TX battery 7.4V 2800mAh with order number 100031MAX2049). Charging is done via the charging socket of the transmitter, suitable only for Futaba FX36Important note: the charger may only be used if the transmitter is operated with a LiPo battery with integrated balancer ! Under no circumstances should it be used with normal LiPo batteries without an integrated balancer, otherwise both the battery and the transmitter may be damaged. Be sure to pay attention to the instructions on the transmitter battery, or if in doubt ask the ACT / Futaba Service Department.TECHNICAL DATA- Input: 100 - 240V 50/60 Hz- Output: 8.4 V / 500mAh 330025011

DESCRIPTIONThis charger can be used to charge special LiPo transmitter batteries which have an integrated balancer (e.g. the MaxPro LiPo TX battery 7.4V 2800mAh with order number 100031MAX2049). The charging is done via the charging socket of the transmitter, suitable for Futaba T6K, T8J, T10J, T12K, T14SG, T16SZ.Important note: the charger may only be used if the transmitter is operated with a LiPo battery with integrated balancer ! Under no circumstances should it be used with normal LiPo batteries without an integrated balancer, otherwise both the battery and the transmitter may be damaged. Be sure to pay attention to the instructions on the transmitter battery, or if in doubt ask the ACT / Futaba Service Department.TECHNICAL DATA- Input: 100 - 240V 50/60 Hz- Output: 8.4 V / 500mAh 330025010

Traxxas iD batteries deliver an easier and safer LiPo charging solution when used with our exclusive iD chargers. You just plug in your iD batteries and press start. The iD charger handles all the settings and quickly gives you an optimized charge, every time. The new 4s capable EZ-Peak® Live multi-chemistry charger features built-in Bluetooth to work seamlessly with the new Traxxas EZ-Peak Live™ app for iOS and Android. The EZ-Peak Live app gives you detailed information, remote monitoring, and advanced operating functions through the high-definition color interface on your mobile device. Along with the new technology, we added more charging power, up to 12-amps for 2s LiPo batteries! Your batteries are charged faster so you can get back to the fun of driving sooner.iD® TechnologyEZ-Peak Live Side ViewThere has never been an easier or safer way to charge your batteries than the Traxxas iD® system. Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! Traxxas pioneered this exclusive technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.Supercharged PowerFaster charging means more time behind the wheel. The EZ-Peak Live puts out a full 100 watts of power—that equates to 12-amps of charging horsepower! The charger automatically detects the size of your iD-equipped battery and configures the settings for the fastest charge possible. NiMH batteries charge faster than ever with a full 5-amps of charging power. LiPo batteries charge even faster with up to 12-amps of colossal power! A balance port is built into the charger for LiPo batteries equipped with external balance leads. No other charger features EZ-Peak Live’s combination of power and flexibility with iD safety and simplicity.TechnologyTraxxas EZ-Peak Live AppNo one pushes the technological envelope further than Traxxas. The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors. This is charging the Traxxas way—fast, easy, and more advanced than ever!Features:100-Watt 12-amp outputRecognizes Traxxas iD® batteries to automatically program and optimize charger settingsLED charge progress indicatorOptimized for faster LiPo balance chargingOne button LiPo storage charge protects your battery investmentAdvanced high-resolution peak detection delivers a perfect chargeEasy to use interfaceSupports Traxxas EZ-Peak Live ApplicationAudible alertsBuilt-in cooling fanAdvanced Mode for full manual control through EZ-Peak Live AppLegacy support for all Traxxas High-Current ConnectorsBuilt-in balance port for conventional LiPo batteriesCharges 5-8-cell NiMH batteriesCharges 2s, 3s, and 4s LiPo Batteries TRX2971GX

The SkyRC Nano B6 Duo has an integrated power supply and delivers a total output of 200W on both charging channels. Thanks to the power distribution function, these can be distributed among the channels such as 1x 200W or 2x 100W.The revolutionary "Scan to Go" function offers a solution to assign each battery its own QR code. All relevant parameters for charging or discharging this battery are then stored in this QR code. Scanning with the smartphone and off you go without long setting of parameters.The SkyRC b6 Nano Duo offers all the usual charging and discharging modes such as: Charge, Ballance-Charge, Fast-Charge, Storage and Discharge as well as the use of different cell technologies LiPo/LiHV/LiFe/Lilon/NiMH/NiCd/PB.Features:- 2 independent charging channels- 200W charging power and maximum 15.0A charging current- Scan to Go function- High contrast display- Simple operation via 4 keys- Bluetooth, controllable via APP and smartphone- XT-60 connector at the charging outputs- XH Balancer connector- Various safety monitoring systemsTechnical data:- Input voltage AC: 100V - 240V- Total charging power: 200W- Discharge power: 8W- Charge current: 0.1A - 15.0A- Discharge current: 0.1A - 3.0A- Balancer current max: 1.0A- Number of cells: LiPo/LiFe/LiIon/LiHV 1s - 6s- Number of cells: NiMH/NiCd 1s - 15s- Pb Battery voltage: 2V - 20V- Weight: 561g- Dimensions: 127x115x71mm SK100146

SkyRC S65 is a powerful charger with battery management, suitable for use with all common battery types such as LiPo, LiHV, Lilon, LiFe, NiCd, NiMH, PB and AGM. The SkyRC S65 charger provides a remarkable 65Watt charging power in a compact housing design. At the front there is a built-in XT60 plug to which you can simply connect your battery or charging cable and avoid the possibilities of reverse polarity.As a special feature, AGM batteries can be charged and PB batteries can also be gently charged at very low temperatures. The display now shows the battery voltage extended to 3 decimal places.Features:Compact designInformative LCD display with backlightingBuilt-in XT60 connector on the front panel10 Profile memoryAGM and PB Cold Charge ModeIntegrated balancer with max. 200mATemperature controlled fanTechnical Data:Input Voltage AC:100V - 240VCharge Circuit Power max:65WDischarge Circuit Power max:10WCharge Current:0.1A - 6.0ADischarge Current:0.1A - 2.0ACell Count: LiPo/LiFe/LiIon/LiHV2s - 4sCell Count: NiMH/NiCd6s - 8sCell Count: Pb3 - 6 CellWeight:315gDimension:117x105x55mm SK100152

Charging Solved!Simple. Fast. Just plug in a pair of Traxxas iD® batteries and press Start. Traxxas’ exclusive iD® technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak® Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.Features:100-Watt outputRecognizes Traxxas iD® batteries to automatically program and optimize charger settingsCharge a NiMH and LiPo at the same timeCharge progress indicatorOptimized for faster LiPo balance chargingOne button LiPo storage charge protects your battery investmentAdvanced high-resolution peak detection delivers a perfect chargeEasy to use interfaceAudible alertsBuilt-in cooling fanAdvanced Mode for full manual control of charger settingsLegacy support for all Traxxas High-Current ConnectorsBuilt-in balance ports for conventional LiPo batteriesCharges 5-8-cell NiMH batteriesCharges 2s and 3s LiPo batteries TRX2972GX

Features:Weight: 220gAutomatic switch-off: yes (both outputs)Number of cells: output 1: 6 cells ( 7,2V)output 2: 4 cells (4,8 V)Maximum charging current: output 1: 2A output 2: 0,5 A 500607017

A great charger for all those who have found their way into the hobby of RC model racing. Compared to the Quick Charger (R01001), it has two charging outputs to charge up to two batteries simultaneously. Equipped with many adapters, this charger can charge almost any NiMH or NiCd battery type. No matter whether the drive/drive battery, receiver battery, remote control battery, starter box battery or 1/18 micro packs. This charger has a Delta Peak switch-off and can easily be plugged into the socket. An LED also signals the current charging status to younger RC fans. R01002

The new EZ-Peak® Live Dual iD Charger takes all the advanced features of the EZ-Peak Live and supercharges the power output to over 26 amps (200 watts)! The 4s capable multi-chemistry dual charger uses built-in Bluetooth to work seamlessly with the new Traxxas EZ-Peak Live™ app for iOS and Android. The EZ-Peak Live app gives you detailed information, remote monitoring, and advanced operating functions through the high-definition color interface on your mobile device. It’s the most powerful, most advanced charger in the popular EZ-Peak lineup. Get back in the action sooner with the new EZ-Peak Live Dual Charger!Features:200 Watt 26+ amp outputRecognizes iD-equipped batteries to optimize charger settingsMAXX Charge feature gets you back in the action quicklyOptimized for faster LiPo balance chargingOne button LiPo storage charge protects your battery investmentAdvanced high-resolution peak detection delivers a perfect chargeEasy to use interface with dual LED charge progress indicatorsSupports Traxxas EZ-Peak Live ApplicationAudible alertsDual high-flow cooling fansAdvanced Mode for full manual control through EZ-Peak Live AppLegacy support for all Traxxas High-Current ConnectorsIntegrated dual balance ports for conventional LiPo batteriesBuilt-in 2-amp USB charger output portCharges Dual 5-8-cell NiMH batteriesCharges Dual 2s, 3s, and 4s LiPo BatteriesPatent Pending iD TechnologyThere has never been an easier or safer way to charge your batteries than the Traxxas iD system. Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! Traxxas pioneered this exclusive technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.MAXX PowerFaster charging means more time behind the wheel. The new MAXX Charge feature takes full advantage of LiPo batteries’ high charge rates. Press the MAXX Charge button and the right side charges at the maximum charge rate the battery will allow (up to 16 amps). The left side receives the remaining power until the right side finishes and then the left side switches to MAXX power mode. This innovative design gets one battery ready in nearly half the time so you’re back in the action having fun.Charging FlexibilityThe EZ-Peak Live Dual is a true multi-chemistry charger. The charger automatically detects the type and size of your iD-equipped battery and configures the settings for the fastest charge possible. With 200 watts of power on tap, EZ-Peak Dual maximizes its charging potential for NiMH and LiPo batteries. Even the largest 4-cell LiPo batteries are no problem with up to 16 amps of charging horsepower per side. Two high-flow fans keep the temperature down for extended charging sessions. Dual balance ports provide backwards compatibility for batteries with external balance leads. There’s even a special 2-amp USB output to charge your mobile device. No other charger features EZ-Peak Live’s combination of power and flexibility with iD safety and simplicity.TechnologyTraxxas pushes the technological envelope to provide you the fastest, most convenient charging experience possible. Not only is EZ-Peak Live Dual our most powerful charger ever, it’s also our most advanced. The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors. This is charging the Traxxas way—fast, easy, and more advanced than ever! TRX2973G

The Traxxas iD™ battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.Features:Recognizes Traxxas iD batteries to automatically program and optimize charger settingsCharge progress indicatorOptimized for faster LiPo balance chargingOne button LiPo storage charge protects your battery investmentAdvanced high-resolution peak detection delivers a perfect chargeEasy to use interfaceBuilt-in cooling fanAdvanced Mode for full manual control of charger settingsLegacy support for all Traxxas High-Current ConnectorsBuilt-in balance ports for conventional LiPo batteriesCharges 5-8-cell NiMH batteriesCharges 2s and 3s LiPo batteries TRX2970GX

Charger for 6-cell NiMH battery packs with a charging current of 4 A and automatic switch-off after charging. With TAMIYA connector. The status LED indicates the current charging status. Also included is a 6-cell 7.2V NiMH battery with 4000 mAh and 4 AA batteries 1.5V. 500607013

The SkyRC e430 is a high-quality charger for charging 2 to 4-cell LiPo and LiFe batteries. The maximum charging power is 30W and the maximum charging current is up to 3A. The battery type as well as the charging current is set via slide switch.Features:- Suitable for 2s-4s LiPo/LiFe- Charging current 1A/2A/3A selectable via switch- Battery type selectable via switch- LED status display- Integrated XH ballancer connector SK100107

This compact and handy charger from SKYRC can charge 2S and 3S Lipos. The LiPo batteries can be connected directly to the charger via the balancer connection. The charger has a 2S XH balancer and a 3S XH balancer connection. The integrated balancer individually adjusts the charging current for each individual cell to charge the LiPo battery to 100%. A charging current of 1200mAH per cell with 11W charging power is available to charge the battery quickly. The charge status of each individual cell is displayed via the three LEDs, so you always have an overview. The charger can be connected directly to the socket and operates from 100 - 240Volt.Properties:compact balancer loader For 2 - 3 LiPo cells. easiest loading Suitable for LiPo batteries only charge status indicator:?standby: green with red flashes Shop: red Finished: Green Technical data: operating voltage: 100-240V charging current: 1200 mA x3 number of cells: 2 - 3 Advert: 3 LED´s operating temperature range: 0° C to 40° C weight without cable: 103g dimensions without cable: LxWxH 88 x 57 x 35mmScope of delivery:1x SkyRC e3 charger1x power cable SK100081

Digital LCD quick charger with a variety of functions and a very flat design - ideal for travelling or on the go! Features:The microprocessor-controlled quick charger with LCD display can charge 1-4 AA & AAA Ni-MH/Ni-Cd batteries. The XCell BC-X1000 charger charges batteries with different charging currents in the steps 200 mA, 500 mA, 700 mA and 1,000 mA. The discharge speed can also be set (selectable discharge current: 100/250/350/500 mA). A separate LCD display is assigned to each charging slot. It is possible to charge AA and AAA batteries simultaneously. The batteries are protected against overheating by temperature monitoring. The cells are fully detected using the very reliable delta peak method. The charger detects defective cells. A cyclic process is available, with which the batteries are first discharged and then recharged to prevent the memory effect. Old cells can be regenerated by discharging/charging cycles. There is a test function for checking the battery capacity. Charging or discharging functions can be carried out simultaneously and independently in the different charging bays. During a charging or discharging process, the user is shown the most important process data on the respective display. These are the current (mA), the current battery voltage (V), the charged or discharged capacity (mAh or Ah) and the elapsed time (hh:mm). The charger is equipped with a charging output for charging smartphones, iPhones or other USB devices (5 V/1 A). Technical Data: Model: Desktop charger Control/Functions: Battery defect detection Control/Functions: Automatic refresh function Control/Functions: Individual shaft monitoring Control/Functions: discharge function Control/Functions: Rapid capacity test Control/Functions: Overcharge protection/maintaining charge. Control/Functions: temperature control Control/Functions: USB charging function Control/Functions: LCD display L/W/H: 128 / 75 / 35 mm Charging technology: Processor charging current: 200/500/700/1000 mA 137156

Charger for the following Spektrum transmitters:DX7SDX8DX7DX10TDX18DX18QQ*Does not work with the ORIGINAL DX6, DX7 Gen1, or DX6i remote control SPM9551