NEWS

The D200 neo AC/DC multifunction charger is the updated version of the D200, specifically designed for model aircrafts. It offers two separate charging interfaces and supports most battery types used in the RC industry.Due to its two independent inputs, the charger can be used for various charging situations. It also has a particularly user-friendly interface and powerful features that were directly adopted from the T1000. For example, the BD350 discharge unit can be connected to significantly increase discharge performance. The new appearance and improved scroll button control make charging more comfortable and easier overall. Of course, the D200 neo is also equipped with the "SkyCharger" app control and an interface for the Charger Master software for Windows/Mac OS, allowing for more freedom in programming and detailed information during charging or discharging.Features:200W AC charging power800W DC charging powerControl via scroll wheel buttonLightweight and compactWith PD/QC3.0 fast chargeCompatible with SkyCharger App and Charger MasterTechnical Specifications:Input Voltage AC: 100 - 240VInput Voltage DC: 10 - 30VCharge Power: AC max. 200W / DC max. 400W x2Discharge Power: 2x 10WExternal Discharge Power: max. 350WCharge Current: 0.1 - 20.0A / 20.0 - 35.0A (Parallel)Discharge Current: 0.1 - 2.0ABalance Charge Current: max. 1.5ACells: LiPo/LiFe/LiIon/LiHV 1 - 6SCells: NiMH/NiCd 4 - 15SCells: Pb 3S / 6S / 12SWeight: 602gDimensions: 116x110x79mm SK100196-01

Add more functionD2 mark 2 add the function of Parallel task, Dual task,DC power (CH1),theme,more language.Upgrade hardwareD2 mark 2 has upgraded hardware, optimizing the system,also further improved the system stability.Dual channel outputWithout interference from each other Support up to 6S balance charging&discharging with 2 output port 5V/2A USB output power from side of the unit, easily charge your mobile phone or other electronic products.FeatureWide range AC Input, Industrial level power management Adaptive for all different voltages across the world; By using PFC circuit makes it works more stable and less interference to power grid. (SCP) Short current protection. (OLP) Over load protection. (OVP) Over voltage protection. (OTP) Over Temperature protectionSupported Batt. TypeLiHv (1-6S) LiPo (1-6S) LiFe(1-6S) Lilon (1-6S) NiMH(1-16S) Cd(1-16S) Pb(1-12S)Feature:1.Wild rang AC Input,Industrial level power management. DC power (CH1):The charger CH1 is equivalent to a DC power supply when selecting this function2.200W of Dual Channel output,without interence from each other. Dual task :Select this setting,the charger will charge/discharge/store to the two channel batteries with the sameparameters at the same time. Paralled task:Select this setting, it could output Max Power to one battery.3.Unexceptionable performance on the power space retio.4.Carefully optimized internal structure,dual fan cooling system.5.scOs specially designed for smart charging OS.6.Support Multiple Languages,totally localized.Description:Input Voltage: AC 100-240VCharge Current: 0.1-12.0A*2Discharge Current: 0.1-1.5A*Max Charge Capacity: 200WMax Discharge Capacity: 15W*2Balancing Current: 1.5A/cell*2Balance Cells: 2-6S*2Supported Batt. Type: LiFe/Lilon/LiPo/LiHv (1-6S) NiMH/Cd(1-16S) Pb(1-12S)Display: 2.4?320×240 IPS LCDOperating Temperature: 0-40°CStorage Temperature: -20-60°CDimensions: 120x108x70 mmWeight: 510g D2MK2

A powerful charging capacity and greatly increased speed make the dual charger T1000 from SkyRC a real highlight. Thanks to the built-in Arm Cortex-M4 chip with HyperBoost, batteries can be charged up to 20 times faster than e.g. via an iMAX B6. The slim, compact design together with the ergonomically shaped handle therefore make the T1000 a top device for beginners and professionals alike.As a dual charger, it is possible to charge two batteries simultaneously, but completely independently of each other. An input voltage of up to 450W (AC) and even a full 1000W (DC) is used for this. Depending on the distribution and advanced charging, the charging power is intelligently and efficiently passed on to the batteries. And if only one battery is connected, it will of course be supplied with maximum power. In addition, the T1000 can also be used as a power source for other devices. In this operating mode it delivers an optimal voltage of 5-27V and an adjustable current of 1-15A. In this operating mode it delivers an optimal voltage of 5-27V and an adjustable current of 1-15A. The 1A3C PD Power Charging Hub* can also be used as an option.Probably the greatest strength lies in the cooperation with the BD350 discharge device (SK600147-01)*. Because if the T1000 is connected to the BD350 discharger, it also becomes possible to discharge batteries at up to 40 amperes, which is worth its weight in gold with such a high speed and power. The associated "Charger Master" app also gives you a precise insight into the discharge curve and no defective battery will go undetected.Break through boundaries with this charger that previously seemed insurmountable!Features:2 independent charging channelsUp to 450W (AC) or 1000W (DC) charging powerSmart power distributionHigh-contrast 2.8'' LCD display with ColorX user interfaceIntelligent fan control20A per port for charging, 40A for discharging35A parallel chargingPD power charging hubAvailable languages: German, English, Japanese and ChineseVarious security measurementsXT60 portsSpecifications:Input Voltage AC: 100V - 240V (50-60Hz)Input Voltage DC: 10V - 30VOutput Voltage DC: 5V - 27VOutput Current DC: 1.0A - 15.0ACharge Power: max. 450W (AC) / max. 1000W (DC)Discharge Power: 10W (main port) / max. 37W (balance port) / max. 350W (external)Charge Current: 0.1A - 20.0A / 20.0A - 35.0A (parallel charging)Discharge Current: 0.1A - 2.0A / 0.1A - 40.0A (external)Balance Current: max. 1.5ACells: LiPo/LiFe/LiIon/LiHV: 1S - 6SCells: NiMH/NiCd: 4S - 15SCells: Pb: 3S / 6S / 12SWeight: 1370gDimensions: 190.3 x 153.5 x 100mm SK100182-01

The SkyRC T400Q offers user-friendly charging and discharging of the most common battery types (LiPo, LiFe, LiIon, LiHV, NiMH, NiCd, Pb) in the usual simple, slim tower design. This AC/DC device creates a total of 100W at 12A on all of its four independent outputs, i.e. a total of 400W.In contrast to other SkyRC T-series devices, the T400Q has optimized software that equips the loader with a so-called "AUTO" function. This automatically sets the current during charging or discharging. Especially with lithium batteries, the charger can efficiently prevent overcharging, which could even lead to an explosion if used incorrectly. It can disconnect the battery from the circuit by itself and also trigger an alarm if a malfunction is detected.The SkyRC T400Q offers all the usual charging and discharging modes such as: charge, balance charge, fast charge, storage and discharge.Features:4 independent charging channels4x 100W charging power and maximum 12A charging current10 profile memoriesHigh-contrast LCD displayAGM and Pb Cold Charge modeSimple operation and menu navigationXT-60 connectors on the charging outputsXH balance connectorVarious security monitorsSpecifications:AC input voltage: 100V - 240VDC input voltage: 11V - 18VCharging power: 4x 100WDischarge power: 10WCharging current: 0.1A - 12.0ADischarge current: 0.1A - 2.0ABalancer current max: 500mANumber of cells: LiPo/LiFe/LiIon/LiHV 1-6SNumber of cells: NiMH/NiCd 1-15SPb battery voltage: 2-20VWeight: 1951gDimensions: 186x103x209mm SK100189-01

AC/DC Dual mode | Dual channel fast chargeSynchronous Parallel charging | 2.8" IPS LCD DisplayAC /DC dual input meet different use requirements.Output: AC /200W, DC /500Wx2.AC/DC Safe accessFool-proof input interface. Smart designThe DC input port and AC input port are mutually exclusive.Only one input can be selected in one time,Ensure the safety operation.Smart High Speed Processor delivers parameter interfere to each port.Hassle Free with Maximum charging power up to 500W for single port.Choose ISDT, Powered by Innovation.2.8" IPS LCD DisplayLow power consumption, 178° visible angleDisplay clear and distinctEven in varies hard environment or anglesAs well as in strong sunshine.Two-way USB interfaceBy connecting the charger microUSB port to the PC,all series can acquire latest firmware upgrading.It can also output 5V/2A power through the USB Type-C interface,For charging mobile devices.Support Brand New BattAir Smart Battery Technology.Smartly exchange information with BattAir battery,Automatically identify the battery type,match the optimal charging parameters.Safe and smart.Specifications:Input voltage: AC 100~240V / DC 10~30VOutput voltage: DC 1~30VMax. input current: DC 35ACharging current: 0.2~20A x2Discharging current:0.2~1.5A x2Balance current: 1.5A/Cell MaxMax. discharging power: 15W x2Max. charging power: AC 200W / DC 500W x2Abnormal voltage alarm: SupportIncorrect cell count setting alarm: SupportSupported battery types and cell count: LiFe, Lilon, LiPo 1~6S, LiHv 1-6S, Pb 1-12S, NiMH/Cd 1-16SParallel charging power and current: 800W/35AParallel discharge power and current: 30W/3AWorking temperature: 0~40°CStorage temperature: -20°C~60°CDimension: 135x135x64mmWeight: About 700g K2Air

RDX2PRO our new all-rounderCharging, discharging, internal resistance measurement and power supply function on two separate outputsCompact dimensions and still powerful with 2X130 watts Flexible on the go at the DC input or stationary at home with the built-in power supply at the socketCan be used with the separately available Bluetooth dongle can be completely remote controlled and monitored via a smartphone (Android and IOS).Technical SpecificationsWidth : 145 mmHeight : 70 mmLength : 155 mmWeight : 1,015 kgBID chip system: no 1-02403

Features:AC/DC dual mode dual channel / 20A x2 / 600W x2Smart chargerIndependent dual channelSupport 1~8S lithium batteryAll-round, continuous high-energy.Support 1~8S LiFe, Li Ion, LiPo battery, 1~7S LiHv, ULiHv battery, 1~14S Pb battery and 1~18S NiMH/Cd batteryThe maximum output power is 1200W,continuous, high-energy output.Both channels can independently support 1~8S batteriesHigh Power SynchronousDual Channel, with Smart Charging.Smart High Speed Processor delivers parameter interfere to each port.Hassle Free with Maximum charging power up to 600W for single port.Choose ISDT, Powered by Innovation.The new generation of K4:Intelligent battery informationinterconnection technologyIt is fully compatible with BattAir’s innovative information interconnection technology,connects the battery through the XT60 interface, automatically recognizes the batterytype, and automatically obtains battery information parameters. Automatically matchsafe working parameters and optimize the charging algorithm.Specification:Input voltage: AC 100~240V / DC 10~34VOutput voltage: DC 1~34VMax. input current: DC 45AMax. charging power: AC 400W / DC 600W ×2Max. Discharging power: 30W ×2Parallel charging power/current: 800W/35AParallel discharging power/current: 60W/3ASupported battery types and cell count: LiFe,LiIon,LiPo 1~8S LiHv,ULiHv 1~7S; Pb 1~14S NiMH/Cd 1~18SCharging current: 0.2~20.0A ×2Discharging current: 0.2~3.0A ×2Balance current: 1.5A/Cell MaxAbnormal voltage alarm: SupportIncorrect cell count setting alarm: SupportSupport Working temperature: 0~40 °CStorage temperature: -20~60 °CDimension: 176×183×57mmWeight: About 1230g K4

AC/DC Dual mode: Dual channel fast chargeSynchronous Parallel charging 2.4? IPS LCD DisplaySafe access:Fool-proof input interface. Smart designThe DC input port and AC input port are mutually exclusive.Only one input can be selected in one time.Ensure the safety operationHigh Power Synchronous Dual Channel, with Smart Charging:Smart High Speed Processor delivers parameter interfere to each port. Hassle Free with Maximum charging power up to 250W for single port. Choose ISDT, Powered by Innovation.Upgradeable Firmware:By connecting the charger USB-C port to the PC, K1 can acquire latest firmware upgrading, ensure the charger have optimalized performance and latest firmware all the time.scOS 2.0:Upgraded scOS 2.0, not only optimizing the system with a new dimension level, also further improved the system stability. New features including DC Power mode, dark mode, battery scrap and more. Streamline support with BattGo and SmartPower, for further interconnection to ISDT ecosystem product information exchange.Adjustable Digital Power Supply:In adjustable digital power supply mode, the Max. power is AC 100W / DC 120W.CC: 0.2~5.0ACV: 5~24VIntroducing the dark mode:scOS 2.0 new dark mode feature, Suitable for low light scenario, System will adjust the interface in dark tone, Reduce light damage to user’s eyes.While remaining the iconic and comfortable charging display style.Signature original creative interactive systems:Serve 152 countries and regions, Support on line upgrading for more languages, and better interactive system for global market.Features:Input voltage: AC 100~240V / DC 10~30VOutput voltage: DC 1~26.4VMax. input current: 20ACharging current: 0.1~10A x2Balance current: 0.5A/Cell MaxMax. charging power: AC 100W / DC 250W x2Abnormal voltage alarm: SupportIncorrect cell count setting alarm: SupportSupported battery types and cell count: LiFe, Lilon, LiPo 1~6S, LiHv 1-6S, Pb 1-10S, NiMH/Cd 1-16SWorking temperature: 0~40?Storage temperature: -20?~60?Dimension: 135x115x49mmWeight: About 485g K1

The SKYRC D260 charger is an AC/DC charger that makes charging batteries easier than ever before thanks to its intuitive operation. With two independent circuits, two batteries of different types can be charged simultaneously. With 130W and maximum 14A the D260 is a fantastic solution for all RC drivers. The device is equipped with five buttons and an LCD display including backlighting and offers even beginners easy operation. Just like professionals are already used to from previous models. Features:- Two separate charging channels with max. 130W per channel (260W in total)- User-friendly and simple menu navigation- Micro-USB socket for firmware upgrade- Loading, unloading and storage- Display of single cell voltage, total voltage, capacity, operating temperature, charging time and much more- Many different charging programs, including a special one to store batteries perfectly longer.- Suitable for various battery types (LiPo, LiFe, LiIon, LiHV, NiCd, NiMH, PB).- Profile memory for 10 charge or discharge data each.Technical data:- Input voltage DC: 11-18V- Input voltage AC: 100-240V- Max. charging power: 2x 130W- Max. discharge power: 2x 10W- Charge current: 2x 0.1-14.0A- discharge current: 2x 0.1-2.0A- Max. discharge current Balancer compensation current: 500mA/cell- Power supply output voltage: 5-25V / 2x 130W- Cell count (LiPo/LiIon/LiFe/LiHV): 1-6 cells- Number of cells (NiMH / NiCd): 1-15 cells- Pb battery voltage: 2-20V- weight: 896g- Dimensions: 160x150x71mm SK100157

The SKYRC Q200 is a 4-channel charger with four independent circuits to charge four different types of batteries in parallel. Through an active energy distribution the Q200 always provides the maximum possible power on each channel to shorten the charging time. The Q200 can also be connected and controlled by a PC and can be used for firmware updates. The Q200 can also be used as a lithium battery meter or for measuring the internal resistance. For safety reasons, the Q200 has a number of automatic safety shutdowns such as charging current limit, capacity limit, max. temperature or charging time.Information: This device (SK100158) is the official successor to the first Q200 charger (SK100104).Automatic power distributionIn AC mode, the available power can be individually distributed to the four outputs to ensure that each type of battery has the maximum and optimum performance during the charging process. For example at channel A = 65W and C = 35W, then channel B = 80W and D = 20W, so that the max. power is 200W.4 individual charging outputsThe charger can charge up to four different batteries in parallel and individually from each other.LIHV Mode AvailableThe additional LIHV mode is able to charge the latest generation of LiPo batteries with a final charge voltage of 4.35 VoltAdditional features- Large LCD display- Terminal voltage check- Re-peak mode for NiMH/NiCd batteries- Battery meter- Battery Internal resistance measuring device- PC communication: USB port for PC operation & firmware upgrade- Smart Phone operation & display with built-in Blutooth module- Two individual charge outputs for parallel charging of different batteries- Supports charge current distribution in AC modeSoftwareCharge Master Software (Optional)This allows the user to monitor the charging process on the PC, such as the battery pack voltage, cell voltage and other useful values, of course all in real time. Furthermore, the charger can be controlled from the PC via the software and the firmware can be updated.The own APP for the chargerSmartphone control through built-in Bluetooth module (for iOS and Android) This charger can be controlled and monitored via smartphone.- Dimensions (LxWxH): 197x182x71mm- Weight: 1325g SK100158

The SkyRC T200 is a universal AC/DC multi-function charger/discharger that can be used with the most popular battery types, such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb.With 100 Watt charging power per charging channel the T200 charger provides more than sufficient charging power for most applications. The SkyRC T200 offers all the usual charge and discharge modes such as: Charge, Ballance-Charge, Fast-Charge, Storage und Discharge.Features:2 independent charging channels2x 100W charging power and maximum 12.0A charging current10 Battery memoriesHigh-contrast LCD displayEasy operationXT-60 connector on charging outputXH balancer connectorVarious security monitoring SK100155

The SkyRC e680 Universal Charger is easy to use and at the same time offers a variety of features.All popular battery types such as LiPo/LiIon/LiFe/LiHV/NiMH/NICd/Pb and the system battery of the DJI Mavic are supported by the microprocessor controlled SkyRC e680.All common loading and unloading modes such as charge, ballance charge, fast charge, storage and discharge are mastered. Especially in the Pb program, the charger offers an AGM and cold charging mode. Also DJI Mavic batteries are supported with their own mode (optional charging cable SK600023-06 necessary).In addition, the e680 can directly supply consumers such as tire sander, LED pit lights, motor testers etc. with 13.8V and 80W max power via the power supply function.Features:Excellent performance data max. 8A/80WIntegrated power supply function 13.8V/80W10 battery memoryTVC Terminal Voltage ControlInternal balancer with XH connectorSimplest 4-key operation‹ AGM and Pb cold charging modesSuitable for LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb and DJI Mavic batteriesTechnical data:Input voltage AC: 100V -240VInput voltage DC: 11V - 18VCharging power: 80WDischarge power: 10WCharge current: 0.1A - 8.0ADischarge current: 0.1A - 2.0ABalancer current: max. 300mAhNumber of cells: LiPo/LiFe/LiIon/LiHV 1s - 6sNumber of cells: NiMH/NiCd 1s - 15sPb Battery voltage: 2V - 20VWeight: 390gDimensions: 135x110x60mm SK100149

The SKYRC D100 v2 is a 2-channel charger with two independent circuits to charge two different batteries in parallel. Through active power distribution, the D100 v2 always provides the maximum possible power on each channel to reduce charging times. The D100 v2 can also be connected and controlled to a PC and to update the firmware. The D100 v2 can also be used as a battery voltmeter or to measure the internal resistance. To be on the safe side, the D100 v2 has a series of automatic safety cut-outs such as over the charging current limit, capacitance limit, max. temperature or charging time.With the new "Scan to Go function" the setting of the charger can be made by scan via smartphone and APP. For this purpose, a small QR code sticker is affixed to the respective battery, which then makes all settings available to the charger and starts automatically with the desired process. At the same time, all relevant battery data can be displayed on the smartphone. The D100 v2 charger is connected to the smartphone via Bluetooth Smart 4.0.Also new is the power supply function of the D100 v2 charger. Here 13.8V with a maximum power of 100W is provided at the rear output in mains operation. Here you can connect e.g. a pit lamp or similar.For the untrained the voice output offers a little help to be guided through the settings faster (output in English).Features:Voice outputScan to Go" functionPower supply functionAdjustable charging and cut-off voltage TVCRe-peak for NiMH and NiCd batteriesFirmware UpgradeOvertemperature protection, overcapacity protection, reverse polarity protection SK100131

The SKYRC D400 is a 2-channel charger with two independent circuits that can charge two different types of batteries simultaneously. It also supports power distribution in AC mode to achieve maximum charging power and reduce charging time. The total power for channel A and channel B is 400W. For example, the charging power for channel 1 can be set to 300W, leaving 100W for channel 2. 400W Ultimate Duo also offers a 150 Watt DC power supply on channel 2 that converts 100-240V AC to 6-15V DC. This can be used to supply 12V consumers. Channel 2 can only be used as a charger or as a power supply, not both functions simultaneously.Further the device can be used for the following additional functions: Lithium battery voltage indicator, internal resistance measurement.The SKYRC D400 is a powerful, microprocessor-controlled charging/discharging station with battery management for use with all common battery types with integrated balancer for up to 7S LiPo, LiFe and LiIon, maximum 20A charging current and maximum 5A discharge current. 20 battery profile memories (10 per channel) are available for quick program recall when charging the same batteries. The additional LiHV mode is able to charge the new generation of LiPo batteries with one end of charging voltage at 4.35V. It offers automatic charging current limitation, capacity limitation, temperature threshold value and charging time monitoring. All this serves the safety in handling the charger and your batteries.Discharge power: 36WBalancer current Max.: 500mA / cellFloat charge current: 50mA - 300mA & OFFDisplay backlight: bluedimensions (LxWxH): 194x258x82,5mm SK100123

Professional and effective charging technology in a compact design. The APC-1 offers everything a modern, efficient and powerful charger should have. 4000013

12 V / 230 V 2-way charger with max 2 x 20 ATwo 200 watt outputs each with up to 20 A charging current in one housing. The power charger that recharges your LiPo batteries - mobile or at home - in a short time. The two charging branches work completely separately from each other and are individually adjustable. Charging data of both outputs are clearly displayed on separate, backlit graphic displays. The menu navigation can be switched to the languages German, English or French. The strong, integrated equalizer measures without current and balances the cells with a powerful 300 mA, which is also sufficient for batteries with a capacity above 5 Ah. Features:BID system (Battery IDentification System)USB charging port 5 V / 1 A for smartphones and digital camerasInternal resistance measurementInternal device temperature display2 x 20 internal battery data memory locationsOvertemperature protectionCurrent overload protectionShort-circuit protectionPowerful 400 W charging and discharging station Two completely separated outputs Equalizer measures without current and balances the cells with a powerful 300 mAFunctions:Charging, discharging, storing (Li-XX), charging - discharging cycles (Ni-XX), balancing (Li-XX), single cell voltage display (Li-XX), warning and safety functions, BID system 308129

Powerful and inexpensive 230V/12 V charge-discharge station with battery management for 1...16cell NC/NiMH batteries, 1...7cell LiIo, LiPo and LiFe batteries, as well as 2...12V cell lead-acid batteries. With integrated equalizer and BID system. The universal charging station for all model making areas with a charging current of max. 10 A (50W). It has a clearly arranged display of charging parameters and battery data via the illuminated LC display. The menu navigation is available in 3 languages (German, English, French) and can be switched via software. The integrated equalizer with its powerful 280 mA automatically brings the individual lithium cells to the same voltage level during the charging process. A powerful equalizer current and high charging current are the important features for fast battery charging. An integrated USB port with bootloader function for subsequent software updates keeps the device up to date. Via this USB interface, the data can also be displayed, stored, compared and printed graphically and numerically on the PC. The required software LogView, is available for free download as donationware. Safe and easy operation and automatic storage of the most important battery data in the robbe BID system (Battery ID Identification System) The special advantages of the BID system: Simply plug the BID chip/key into the charger and start the charging process with the start button. Maximum protection against operating errors Storage of the most important battery data in the BID chip Of course the POWER PEAK® B7 EQ-BID charger can also charge batteries without BID system 4 internal battery data memory locations Functions: Loading, unloading, unloading / loading 1x Display of charged and discharged capacity Display of input and charging voltage Optional automatic or manual charge-discharge function Equalizer display - Single cell voltage, optionally as overview (with 2 decimal places) or in list function with 3 decimal places (1/1000 Volt) Resolution NC/NiMH batteries 1...16 cells The digital delta peak automatic switch-off switches off the charging process at the right time and is adapted to NC and NiMH batteries.Lithium batteries 1...7 cells Display of the single cell voltage of lithium battery packs Automatic switch-off according to the CC-CV charging method Lead-acid batteries 1...12 cells (2...24Volt) Automatic switch-off according to the CC-CV charging method 308566

Features:Input voltage: AC 100-240 V / DC 10-30 V.Output voltage: DC 1-35VMax. Input current: DC 14ACharging current: 0.1-10Adischarge current: 0.1-1.0Aequalizing current: 1.5 A / cell maxMax. discharge power: 10WMax. charging power: AC 100W / DC 250WAbnormal voltage alarm: SupportAlarm in case of wrong setting of the cell count: SupportSupported battery types and cell count: LiFe, Lilon, LiPo 1-6S,LiHv 1-6S,Pb 1-12S, NiMH, Cd 1-16SWorking temperature: 0-40 ?Storage temperature: -20-60Dimensions: 126 x 115 x 49 mmWeight: approx. 460g D1

The EXPERT CHARGER xBase 2.0 SE unites all of the features modellers look for in one ultracompact device. It allows you to charge all types of batteries from 1V to 21V with 50mA to 4A. The EXPERT CHARGER xBase 2.0 SE is a high-performance charger for nickel-metal hydride (NiMh), nickel cadmium (NiCd), lead acid (Pb) and especially lithium ion/polymer/ ferric oxide A123 rechargeable batteries and at the same time a precise measuring device for determining rechargeable battery status. A clearly designed LCD display provides the user with information on battery voltages and currents as well as the charging time and the amount of power charged-in (in mAh). The EXPERT CHARGER xBase 2.0 SE is user friendly and its advantageous, compact design makes it extremely robust yet space saving.Technical data:Input voltage: 230 V, 50 Hz (AC) or 12 V (DC)Charging current: 0,1 - 4 ABattery types: 1-4 cells Li-xx, 1-10 cells NiMh/ NiCd, 1-6 cells Pb (2-12V)Balancer + XHP AdapterDelta-Peak cut offWeight: 175gSize: 116x75x25mm 500606053

The I-Peak 100 V3 is a multifunction charger / discharger with which you can charge, discharge and maintain the most common battery types, such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/PB.With a remarkable 100 watts of charging power and a maximum of 10A of charging current, the I-Peak 100 V3 charger provides more than enough charging power for most applications.The I-Peak 100 V3 also has a USB output on which, for example, a smartphone can be charged.The charger can store up to ten different charge / discharge profiles.This allows you to use the program setting data for continuous charging or discharging.Users can retrieve this data at any time without special program setting.FeaturesInput voltage: AC 100-240V/DC 11.0-18.0VCharging power: max. 100WDischarge power: max. 10WCharging current: 0.1 - 10.0 ADischarge current: 0.1 - 5.0 ALiPo/LiFe/LiHV/LiIo cells: 1-6NiCd/NiMH battery cells: 1-15Lead acid batteries: 2V-20V (1-10cells)Weight: 0.43 KgDimensions: 135x95x61mm 1798

Spektrum™ Smart Technology is all about providing a higher connection to your hobby. It's an RC ecosystem that gives you complete control over your model, while making key components of your model easier than ever to use. Smart Technology ensures that all of your model's electronics work together seamlessly for maximum efficiency and performance. It keeps you informed of the status of each component, increases your confidence in its capabilities, and makes your entire system more responsive and easier to use.Spectrum radios with smart features can instantly download firmware updates via Wi-Fi and exchange firmware with compatible radios via Bluetooth. Spektrum Smart LiPo batteries have a built-in microchip that automatically records your charging preferences and sends them to the Smart chargers - just plug in your battery and press "Start". The Smart IC™ series connectors include an innovative data cable that can easily transfer information between Smart components with a single connection. Finally, Smart ESCs not only provide power, but also eliminate the problems of running telemetry. The days of installing and connecting multiple wires, sensors, modules and connections are over.Features:- Intelligent charging features include protection against short circuit, overcurrent and more- Simple, one-touch command selection interface makes operation easy- Four independent connections for maximum charging precision- Individual LED indicators show battery current, capacity and voltage- Versatile design includes four connector types built into each charging port- Independent charging circuits for improved speed and efficiency- Charging flexibility with adjustable charging currents from 0.05 to 1.2A- Integrated cooling system promotes the reliability of the unit- Visual and audible charge level indication system- Convenient AC and DC input (11 - 15v DC)The Spektrum™ Micro 4 Smart charger is a 4-port tool for the RC pilot who wants the ultimate 1S LiPo battery charger. Equipped with Spektrum Smart Charging technology, its digital LED status screen provides important battery information in clear form as soon as you make the connection. Its compact all-in-one design offers an incredible four independent charging channels, each with enough built-in connections to make charging multiple 1S batteries with the highest precision easy.Each of the four charging channels is equipped with independent circuitry to improve charging precision and efficiency. The vivid LED status lighting includes individual 4-digit displays and multi-coloured LEDs, so you can instantly see the charging phase and battery status. The simple pressure selector interface allows fine tuning of charge rates from 0.05 to 1.2A, allowing fast charging of most high rated batteries. Exclusive software automatically detects LiPo and LiHV 1S batteries, combined with Spectrum Smart Charging technology, so that your batteries receive maximum protection against short circuit, overcurrent, reverse polarity and input voltage errors.The Micro 4 AC/DC system works when plugged into a standard wall outlet, or you can even take the Micro 4 charger with you. Unlike charging several 1S batteries in parallel, each battery is individually detected. This allows you to charge individual 1S batteries with the precision of much more expensive chargers and possibly extend the life of all your 1S batteries.Four precision charging terminalsFour individual charging circuits and four separate charging connections enable precise charging of several 1S packs. Select the precise charge rate you need, from 0.05 to 1.2 amps, using the individual dials, combined with a 4-digit display and a multi-colour status LED system, so you can have a fleet of batteries working for you.Easy to useSimply connect your 1S battery to one of the charging ports and the Micro 4 will immediately display the battery voltage. The Micro 4 is conveniently powered from a standard 120V outlet or a remote power source. Its push-button rotary knob makes it easy to program all four charging ports, while LED indicators clearly show charge status, rate, voltage and more.Compact designEach of the four connections has four connector types to choose from, so there are no cumbersome adapters to untangle. Thanks to its light weight and small size, it is even easier to pack the device in a backpack and take it everywhere.Features:AC Power Input: 100-240VDC Power input: 11-15VCharge Circuit Power: 4 × 5,22W ±10 %Charge Current Range: 0,05-1,2A ±10 %Battery Type: 4 × 1S LiPo/LiHVBattery Connector Type: Molex / JST / UM / PH2.0Working Temperature: 0-50 °CNet Weight: 250 gDimensions (L × W × H): 132 × 100 × 50 mm SPMXC1040I

The further development of the successful X4 Micronow also for LiHV batteries!12V/230 V 4-fold charger for 1-cell LiPo andLiHV batteriesThe X4 MICRO SE has 4 completely identical, but nevertheless independent charging outputs with a charging capacity of 5 watts each. It is up to 4 rechargeable batteries can be charged at the same time and the Charge current can optionally be from 0.05 - 1.2 A. 4 independent charging sockets 4 different connection options per output (JST,mCPX, Micro, MX) 4 independent charging capacities LED and acoustic signals indicate charging status Charge current continuously adjustable from 0.05 - 1.2 A AC or DC power supply Maximum safety: short-circuit protection, overcharge protection,Reverse polarity protection and DC input voltage protection 1-00689

The HITEC X1 RED charger is a microprocessor-controlled 12V / 230 V ultra-performance charger with management functions, for all common battery types. Its slim tower design allows easy front operation of all inputs such as 4mm battery plug, balancer connector (XH), temperature sensor ports, USB-5V/2.1A and Micro B-USB. Special features are the easy-to-read 3.2-inch LCD screen and the HITEC Charge Master software, with which you can conveniently operate the X1 RED from your computer. This compact 60-watt power charger allows you to perform all your charging operations easily and conveniently.Features:Optimized operating software10 different loading/unloading profilesIntegrated balancer for lithium batteriesSuitable for different types of lithium batteries - Lithium charging programs: Normal, Fast, Balance and Storage ChargePC Charge Master SoftwareEfficient fan for maximum performance with low heat generationSlim tower design 114131

Ideal for charging any combination, of up-to four 30-500mAh, 1S UM and MCPX batteries as well as 2S battery packs equipped with the 3-wire JST-PH plug featured on UMX-class airplanes and helicopters. Its AC/DC capability means that you have the option to use a separate DC power supply or simply connect the charger to a household wall outlet. Built-in sockets make it easy to connect single-cell batteries. In addition, UM battery leads are provided when preferred by the user. The rugged case features four independently functioning charge circuits, each with a simple LED status display. All four ports have 9 watts of dedicated power and five selectable charge rates from 0.1-1.0A. Built-in protection features guard against short circuit, over current and reverse polarity.CHARGES:2S, 120–300mAh Li-Po packs with the JST-PH plug1S, 200mAh ultra micro MCPX Li-Po1S, 500mAh ultra micro Li-Po (adapter required)1S, 30–150mAh ultra micro Li-PoFeatures:Compact, rugged designAll four ports can be used simultaneously or one at a timeWorks with Blade®, E-flite® and ParkZone® 1S as well as 2S ultra micro Li-Po batteriesFour independently functioning charge circuits each with a simple LED status display9 Watts of dedicated power per portFive selectable charge rates from 0.1–1.0AEach port is suitable for charging one 30–150mAh, 1S UM cell, a 1S MCPX cell, or one 120–300mAh 2S pack equipped with a JST-PH, 3-wire connectorOperates on 100–240V AC (50/60Hz) or 11–18V DC input voltageBuilt-in protection features guard against short circuit, over current and reverse polarityDetachable AC and DC power cords and 1S battery extension leads included EFLC1105AEU

Features:1st Classic "Shuttle Roll" design button, perfect for one-hand operation.Specification:- Charging capacity: AC 60W DC 200W- Charge current: 0.1A - 8A- Discharge power: 10W- Discharge current: 0.1A - 1A- Input voltage: AC 110V - 220V / DC 10V - 30V- Output voltage: DC 1V - 26.4V- For the following batteries: LiFe, Lilon, LiPo, LiHv 1-6S / Pb 1-12S / NiMH 1-16S 608AC

AC/DC Dual mode | Dual channel fast chargeSynchronous Parallel charging | 2.8? IPS LCD DisplayAC/DC dual modeAC /DC dual input meet different use requirements.Output ? AC /200W, DC /500Wx2.AC/DC Safe accessFool-proof input interface. Smart designThe DC input port and AC input port are mutually exclusive.Only one input can be selected in one time,Ensure the safety operation.AC/DC dual modeAC /DC dual input meet different use requirements.Output ? AC /200W, DC /500Wx2.High Power Synchronous Dual Channel, with Smart Charging.Smart High Speed Processor delivers parameter interfere to each port.Hassle Free with Maximum charging power up to 500W for single port.Choose ISDT, Powered by Innovation.2.8? IPS LCD DisplayLow power consumption, 178° visible angleDisplay clear and distinctEven in varies hard environment or anglesAs well as in strong sunshine.Two-way USB interfaceBy connecting the charger microUSB port to the PC,all series can acquire latest firmware upgrading.It can also output 5V/2A power through the USB Type-C interface,For charging mobile devices.SpecificationsInput voltage:AC 100~240V / DC 10~30VOutput voltage:DC 1~30VMax. input current:DC 35ACharging current:0.2~20A x2Discharging current:0.2~1.5A x2Balance current:1.5A/Cell MaxMax. discharging power:15W x2Max. charging power:AC 200W / DC 500W x2Abnormal voltage alarm:SupportIncorrect cell count setting alarm:SupportSupported battery types and cell count:LiFe, Lilon, LiPo 1~6S, LiHv 1-6S, Pb 1-12S, NiMH/Cd 1-16SParallel charging power and current:800W/35AParallel discharge power and current:30W/3AWorking temperature:0~40?Storage temperature:-20?~60?Dimension:142x135x64mmWeight:About 700g K2

Powerful charger of 240-watt class with two separate outputs 2 x 120 watts. Thus 2 different batteries can be charged simultaneously at full power up to max. 12A each (Most other devices in this class can charge a maximum of 10A). A powerful power supply unit is integrated and the charger can therefore be operated from a normal 220V socket or a 12V power source (e.g. car battery). Thanks to the touch-sensitive screen (Color Touch Screen), operation is simpler and clearer than ever before. And self-explanatory: You don't have to read a thick manual but can start immediately!Features:Charger of the latest generation for almost all battery types including the new high-voltage HV-LiPoSpecial HV-Lipo charging program (switch-off voltage additionally adjustable)Large, high-contrast colour display 65 x 50 mm (touch screen)Multilingual menu guidance German / EnglishIntegrated fanIntegrated power supply for 240V or 12V operation (AC/DC)Simultaneous charging power up to max. 2 x 12 Ampere ( 2 x 120 Watt)Convenient automatic charging e.g. of 1-cell LiPo batteries at the USB outputMini USB port for PC link and possible future software updatesVery easy operation and coloured display C6506