Transverse thrusters from Raboesch are characterised by high-quality materials and workmanship. The aileron can be installed either vertically or horizontally. Due to the use of O-rings in the housing cover and G-rings in the drive, the aileron is 100% watertight. The drive is effected by a 2-bladed paddle wheel, which sucks the water into the jet tube and pushes it out again very effectively at a relatively high pressure on the opposite side. The construction is very stable and maintenance-free. The pump housing and the radiant tubes are made of impact-resistant ABS. The aileron rb108-01 to rb108-05 are controlled by a continuously variable speed controller for clockwise and anti-clockwise rotation.

• Technical Data Bow Thruster 108-05
• Beam tube diameter inside 25 mm
• Steel pipe diameter outside 28 mm
• total width max. 154 mm
• total height approx. 66 mm
• Total length approx. 53 mm
• Weight approx. 105 g

• Motor dimensions without shaft 43x28 mm
• motor shaft 2,3x12 mm
• Nominal voltage 6 V
• Voltage range 6 - 7.2 V
• Idle speed 17000 rpm (7.2 V)
• Idle current consumption 0.50 A
• Blocking current 20 A
• Efficiency 78