The SE6 Servo Expander is a device that converts the serial bus signal into standard PWM servo outputs.
It offers up to six configurable servo outputs with optional output period and a fail safe setting.

The SE6 Servo Expander is ideal for reducing the size of the wiring harness in the model to enable additional functions in addition to the flybarless system.

The SE6 is the perfect choice for models with complex wing or tail mechanics, as well as models with limited
Receiver outputs where several servos are connected to a primary receiver with only one cable
can be connected. If you need more receiver channels, simply connect the SE6
to the serial receiver line and assign the output channels freely.

Supported protocols
Futaba: S.Bus/S.Bus2
Graupner: SUMD, Hott telemetry with adjustment option on the transmitter
JETI: EX Bus with adjustment possibility at the transmitter, via JETI Box emulator
multiplex: SRXL 12ch, SRXL 16ch
Features
Small dimensions and high current throughput via the integrated MR30 power connection
Automatic detection of serial data / telemetry after startup
Configuration via the transmitter or external terminal (JETIBOX/SMART-BOX)
Firmware updates via USB interface
Technical data:
Dimensions (with plug) 33x19x9mm
Weight (with plug) 5,4g
Servo slots 5 or 6
Operating current 15mA
Temperature range -20 - 85°C
Supply voltage 4 - 14V (recommended 5-8.4V)
Continuous current up to 15A
peak current 60A (2sec)
Supported Protocols
JETI Duplex
multiplex
Graupner Hott
Futaba S.Bus
Status LED yes