• With JR connector system
• suitable for: JETI , Multiplex , Graupner & Futaba
• touch switch function included
• remembers the last operating state
• optional charging of the secondary battery

Voltario T60 with JR connector system
The Voltario T60 is a high performance digital dual battery backer with advanced telemetry functions. It includes a charging circuit and a touch switch function. The unit is ideal for medium size models , where high voltage servos are used without voltage stabilization. Voltario T60 is suitable for models , which are equipped with either dual receiver batteries or ESC battery eliminator circuit (BEC) as the primary power source in combination with a small backup battery. The unit favors its primary battery input, while automatically switching to the secondary input in the event of a voltage drop. The charging circuit can be optionally activated to charge the secondary battery via the primary input/BEC. Voltario T60 is designed to turn on and off the electronics in your model, it can also replace a mechanical switch. The unit remembers its last operating state and if the battery is accidentally disconnected, the Voltario will automatically reboot when the battery is reconnected.

Features:

• intelligent double battery switch/multiplexer with configurable voltage switching threshold
• touch switch function
• support for Duplex EX, Futaba S.Bus2, Multiplex MSB, Graupner HOTT telemetry (current, voltage, capacity of both battery inputs)
• optional charging of the secondary battery
• remembers the last operating state

Technical data

• T60 without connector T60 with JR connector
• dimension 36x19x6mm 36x19x6mm
• Weight incl. cable 23g 17g
• Cable 1mm2 (17AWG) 0,5mm2 (20AWG)
• Connector system without connector Standard JR
• Continuous current 15A 15A
• Peak current (2s) 30A 30A
• Standby current 50µA 30A
• Operating current 40mA 30A
• Charging current for Batt. 2 up to 200mA up to 200mA
• Temperature range -20 to 85°C -20 to 85°C
• operating voltage 4-12.6V -20 to 85°C
• recommended supply voltage 5-8.4V 5-8.4V
• Telemetry Duplex EX, MSB, HOTT , S.Bus2 Duplex EX, MSB, HOTT , S.Bus2
• Touch switch Yes Yes
• BEC No No

Touch or mechanical switch selection Yes Yes
Status LED Yes Yes