RadioLink Receiver R12DS 12-channel FHSS/DSSS telemetry
Product number:
9790255
Manufacturer number:
1RL0050
GTIN/EAN:
9890500030536
Description "RadioLink Receiver R12DS 12-channel FHSS/DSSS telemetry"
Radiolink R12DS 2.4GHz is a 12-channel telemetry receiver with DSSS and FHSS synchronous transmission with frequency hopping. It is compatible with the stations Radiolink AT9, AT9S, AT10 and AT10II (Transmitter AT9, AT9S and AT10 can be upgraded by updating their firmware, which can be downloaded on the manufacturer’s website - http:///radiolink.com.cn/doce/at10upgraded.html, AT10II is already 12-channel in the basic version. The receiver is compatible with the telemetry modules PRM-01 and PRM-02.
It offers two operating modes - with standard wide (PWM) signal outputs (11 channels) or with the S-BUS series output (12 channels).
The receiver is suitable for RC models of all kinds (the range specified by the manufacturer is 1100 m on the ground and 3000-4000 m in the air).
The use of DSSS/FHSS transmission technology ensures high interference resistance and allows to set fail-safe in case of failure or strong interference of the transmitter signal.
Operating modes
Binding with the transmitter is performed with the bind button on the receiver, the operating modes are displayed with the LED diode.
The receiver is equipped with contact strips for standard plugs UNI (=JR/Graupner, Hitec, Futaba); the outputs are directed in the direction of the longitudinal axis of the receiver.
The receiver set includes: receiver R12DS, manual.
Specifications:
It offers two operating modes - with standard wide (PWM) signal outputs (11 channels) or with the S-BUS series output (12 channels).
The receiver is suitable for RC models of all kinds (the range specified by the manufacturer is 1100 m on the ground and 3000-4000 m in the air).
The use of DSSS/FHSS transmission technology ensures high interference resistance and allows to set fail-safe in case of failure or strong interference of the transmitter signal.
Operating modes
- With individual PWM servo outputs: the red LED indicates the PWM signal output, a total of 11 channels.
- With the SBUS series output: the blue/purple LED indicates the SBUS signal output, a total of 12 channels. SBUS and PWM signal outputs can be used simultaneously in SBUS mode. At the socket 11 is the SBUS output signal, the sockets CH1 and CH10 serve simultaneously as PWM outputs of the channel signals 3 to 12. How many PWM outputs you can use depends on how many BUS signal channels you use (for example, if you use 4 S-BUS signal channels, you have 8 PWM signal channels available).
Binding with the transmitter is performed with the bind button on the receiver, the operating modes are displayed with the LED diode.
The receiver is equipped with contact strips for standard plugs UNI (=JR/Graupner, Hitec, Futaba); the outputs are directed in the direction of the longitudinal axis of the receiver.
The receiver set includes: receiver R12DS, manual.
Specifications:
- Modulation/coding 2.4GHz FHSS / DSSS
- Number of channels (PWM) - (S-BUS) 11 - 12
- Serial output S-BUS
- Function Fail-safe
- Power supply 4.8V,6V,7.2V,7.4V
- Consumption without servos [mA] 40 - 180
- Length [mm] 50
- Width [mm] 31.5
- Height [mm] 14.5
- Weight [g] 14
Technical data
| Channels: | 12 |
|---|---|
| L/W/H (mm): | 50/31,5/14,5 |
| Weight (g): | 14 |