Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Greece, Hungary, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Serbia,  Slovakia, Slovenia, Spain, and the United Kingdom!

UP Pre-gel white
White gelcoat for laminates of epoxy resin, not suitable for laminates of polyester resin.

• Ready to use*
• Tack-free curing
• Paraffin-free
• Preaccelerated with cobalt
• Can be dyed with universal colour pastes or transparent colour

Thixotropic (non-drip) polyester gel coat that cures to yield tack-free white top layers in conjunction with epoxy laminates.

Processing time with 2 % MEKP: approx. 15-20 minutes
Consumption (at a layer thickness of 0.4 mm): approx. 0,5 kg/m²

Colour: White (following RAL 9010)

An epoxy resin laminate can be applied after approximately 2 to 24 hours of curing time. It Can also be used as topcoat on cured laminates.

Not for use in applications where parts are permanently immersed in water.

Can be diluted with styrene and dyed easily with our universal color pastes up to 0.5 % by weight.

*Store containers below 20 °C and tightly closed, shelf life will then be about 6 months.

Please order MEKP hardener separately

Laminate structures for vehicle construction in combination with this product are approved by the TÜV-Süd.