NEWS

Rock racers and desert buggies are all the rage at the moment! One reason for this is that these vehicles can be driven not only on the road. Especially in rough terrain, these vehicles offer a driving experience that is second to none.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!40A HOBBYWING speed controller with Tamiya plug and 21T brushed motor (NiMH and LiPo compatible)Oil pressure shock absorber with adjustable preloadLED light bar front and rearSPEED: +/- 35 km/hDrive:The 40A HOBBYWING Brushed speed controller is waterproof and pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). It is driven by a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent four-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminium drive shaft. Suspension:16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimise the handling and adapt it perfectly to the conditions. Adjustable shock towers made from 4mm 6061-T6 aluminium, anti-roll bars on the front and rear axles and independent independent suspension provide amazing handling and feel.Bodywork and lighting:The bodywork with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure compensation tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 cuts a fine figure thanks to marker lights and an LED light strip at the front (white) and another light strip at the rear (red/orange). Finally, there is a full-size spare wheel at the rear of the vehicle.4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable chassisBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminium motor mount5mm aluminium shock towersAluminium propshaft2 cone differentials (front/rear)LED lighting front and rearExtremely detailed body with add-on partsVehicle can be operated with 2-cell LiPo batteries (up to 30C) Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTyres front/rear Ø: 110mm / width: 45mmDamper oil: 400CPSDamper installation length: 80mmEngine ratio Brushed version: Pinion: 21Z / Main gear: 77Z (48dp) 12226­Full­RTR

Rock racers and desert buggies are all the rage at the moment! One reason for this is that these vehicles can be driven not only on the road. Especially in rough terrain, these vehicles offer a driving experience that is second to none.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!40A HOBBYWING speed controller with Tamiya plug and 21T brushed motor (NiMH and LiPo compatible)Oil pressure shock absorber with adjustable preloadLED light bar front and rearSPEED: +/- 35 km/hDrive:The 40A HOBBYWING Brushed speed controller is waterproof and pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). It is driven by a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent four-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminium drive shaft. Suspension:16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimise the handling and adapt it perfectly to the conditions. Adjustable shock towers made from 4mm 6061-T6 aluminium, anti-roll bars on the front and rear axles and independent independent suspension provide amazing handling and feel.Bodywork and lighting:The bodywork with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure compensation tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 cuts a fine figure thanks to marker lights and an LED light strip at the front (white) and another light strip at the rear (red/orange). Finally, there is a full-size spare wheel at the rear of the vehicle.4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable chassisBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminium motor mount5mm aluminium shock towersAluminium propshaft2 cone differentials (front/rear)LED lighting front and rearExtremely detailed body with add-on partsVehicle can be operated with 2-cell LiPo batteries (up to 30C) Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTyres front/rear Ø: 110mm / width: 45mmDamper oil: 400CPSDamper installation length: 80mmEngine ratio Brushed version: Pinion: 21Z / Main gear: 77Z (48dp) 12225­Full­RTR

Rock racers and desert buggies are all the rage at the moment! One reason for this is that these vehicles can be driven not only on the road. Especially in rough terrain, these vehicles offer a driving experience that is second to none.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!40A HOBBYWING speed controller with Tamiya plug and 21T brushed motor (NiMH and LiPo compatible)Oil pressure shock absorber with adjustable preloadLED light bar front and rearSPEED: +/- 35 km/hDrive:The 40A HOBBYWING Brushed speed controller is waterproof and pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). It is driven by a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent four-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminium drive shaft. Suspension:16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimise the handling and adapt it perfectly to the conditions. Adjustable shock towers made from 4mm 6061-T6 aluminium, anti-roll bars on the front and rear axles and independent independent suspension provide amazing handling and feel.Bodywork and lighting:The bodywork with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure compensation tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 cuts a fine figure thanks to marker lights and an LED light strip at the front (white) and another light strip at the rear (red/orange). Finally, there is a full-size spare wheel at the rear of the vehicle.4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable chassisBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminium motor mount5mm aluminium shock towersAluminium propshaft2 cone differentials (front/rear)LED lighting front and rearExtremely detailed body with add-on partsVehicle can be operated with 2-cell LiPo batteries (up to 30C) Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTyres front/rear Ø: 110mm / width: 45mmDamper oil: 400CPSDamper installation length: 80mmEngine ratio Brushed version: Pinion: 21Z / Main gear: 77Z (48dp) 12226

Rock racers and dessert buggies are on everyone's lips at the moment! On the one hand, this is due to the fact that the vehicles can be moved not only on the road. Especially in rough terrain, these vehicles offer a driving image that is unparalleled.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!Highlights:40A HOBBYWING speed controller with Tamiya connector and 21T brushed motor (NiMH and LiPo compatible)Oil pressure shock absorber with adjustable preloadLED light bar front and rearSPEED: +/- 35 km/hDrive:The 40A HOBBYWING brushed speed controller is waterproof and comes pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). Powered by this is a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminum driveshaft.Suspension:16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and ride.Body and Lighting:The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 cuts a fine figure thanks to marker lights and an LED light bar at the front (white) and another light bar at the rear (red/orange).Finally, there is a full-size spare wheel at the rear of the vehicle.Features:4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable suspensionBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminum motor mount5mm aluminum shock towersAluminum driveshaft2 cone differentials (front/rear)LED light bar front and rearExtremely detailed body with add-on partsVehicle can be powered by 2-cell LiPo batteries (up to 30C)Specification:Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTires front/rear Ø: 110mm / Width: 45mmDamper oil: 400CPSDamper installation length: 80mmMotor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp) 12225

Rock racers and dessert buggies are on everyone's lips at the moment! On the one hand, this is due to the fact that the vehicles can be moved not only on the road. Especially in rough terrain, these vehicles offer a driving image which is unparalleled. The powerful ADB1.4 brushless offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!Highlights:50A HOBBYWING brushless speed controller with T-plug and 3421KV brushless motorOil pressure shock absorber made of aluminum with adjustable preloadLED light bar front and rearAluminum chassis plateSPEED: +/-50 km/hDrive:The 50A HOBBYWING brushless speed controller is waterproof and pre-assembled with a T-plug. The ESC should be used with a 2S LiPo battery. This drives a 3421KV brushless motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two CNC machined differentials (front and rear) are driven by an aluminum driveshaft.Suspension:16mm aluminum oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 brushless and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and feel.Body and Lighting:The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 brushless cuts a fine figure thanks to marker lights and an LED light bar at the front (white) and another light bar at the rear (red/orange).Finally, there is a full-size spare wheel at the rear of the vehicle.Features:4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable suspensionBall bearing driveAdjustable 16mm aluminum big bore shocksSteel differential outputs Aluminum chassis plateAdjustable upper suspension arms5mm aluminum motor mount5mm aluminum shock towersAluminum driveshaft2 CNC cone differentials (front/rear)LED light bar front and rearExtremely detailed body with add-on partsVehicle should be powered by 2-cell (2S) LiPo battery packSpecification:Scale: 1:10Dimensions (L/W/H): 515x320x170 mmWeight: 2550gWheelbase: 290mmGround clearance: approx. 50mmTrack width: 245mm front / 240mm rearWheels front/rear Ø: 128mm / Width: 55mmDamper oil: 400CPSDamper installation length: 80mmMotor ratio brushless version: Pinion: 21T / Main gear: 77T (48dp) 12245­Full­RTR

Rock racers and dessert buggies are on everyone's lips at the moment! On the one hand, this is due to the fact that the vehicles can be moved not only on the road. Especially in rough terrain, these vehicles offer a driving image which is unparalleled. The powerful ADB1.4 brushless offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!Highlights:50A HOBBYWING brushless speed controller with T-plug and 3421KV brushless motorOil pressure shock absorber made of aluminum with adjustable preloadLED light bar front and rearAluminum chassis plateSPEED: +/-50 km/hDrive:The 50A HOBBYWING brushless speed controller is waterproof and pre-assembled with a T-plug. The ESC should be used with a 2S LiPo battery. This drives a 3421KV brushless motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two CNC machined differentials (front and rear) are driven by an aluminum driveshaft.Suspension:16mm aluminum oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 brushless and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and feel.Body and Lighting:The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 brushless cuts a fine figure thanks to marker lights and an LED light bar at the front (white) and another light bar at the rear (red/orange).Finally, there is a full-size spare wheel at the rear of the vehicle.Features:4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable suspensionBall bearing driveAdjustable 16mm aluminum big bore shocksSteel differential outputs Aluminum chassis plateAdjustable upper suspension arms5mm aluminum motor mount5mm aluminum shock towersAluminum driveshaft2 CNC cone differentials (front/rear)LED light bar front and rearExtremely detailed body with add-on partsVehicle should be powered by 2-cell (2S) LiPo battery packSpecification:Scale: 1:10Dimensions (L/W/H): 515x320x170 mmWeight: 2550gWheelbase: 290mmGround clearance: approx. 50mmTrack width: 245mm front / 240mm rearWheels front/rear Ø: 128mm / Width: 55mmDamper oil: 400CPSDamper installation length: 80mmMotor ratio brushless version: Pinion: 21T / Main gear: 77T (48dp) 12245