Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (6x6) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope.The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:6x6 (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:1100T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutesSpecifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 100TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155/60mmGround clearance: 30mmTrack width: 110mmLength: 297mmWidth: 113mmHeight: 125mmWeight: 410gWheels: 18x57mm 18027

Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (6x6) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope.The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:6x6 (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:1100T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutesSpecifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 100TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155/60mmGround clearance: 30mmTrack width: 110mmLength: 297mmWidth: 113mmHeight: 125mmWeight: 410gWheels: 18x57mm 18026

Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18025

Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18024

With custom builders making up a large percentage of the RC crawler community, Absima wanted to offer something this community could really get excited about. We are now offering the CR3.4 in a pre-assembled chassis kit version, for those who want to run this great chassis with their own choice of electronics, wheels and body. The Absima CR3.4 already includes so many features custom builders look for, and is ready to be transformed into a high performance, unique, custom car.Please note that this rolling chassis comes WITHOUT body, wheels and electronic components!Chassis & SuspensionA realistic designed 5mm CNC machined aluminum frame with a heavy duty aluminum 4-link suspension systemOil shock absorbers with internal springs, 5mm piston rods and shock boots provide a silky smooth and realistic responseHeight-adjustable body posts to perfectly match the body height to thre chassisPortal AxlesPortal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. With conventional crawlers, the torque applies so much force that the vehicle jumps over the obstacle. The design of the portal axles reduces the gear ratio at the wheels and virtually eliminates the torque surges of the drive. The overall reduction ratio of the axle drive is more than twice that of non-portal designs to insure a smooth run.Steering SystemA unique hydraulic steering shock absorber designHardened steel drive shafts and a steering angle of 45.8° offer the best possibilities to handle any terrainDrive SystemThe CR3.4 chassis features a 2-speed transmission to conquer tough terrain and bring you also fast to the next obstacle. Just push a button on the radio and change from transmission ratio 1/37.1 (low speed) to 1/15.1 (high speed)Lock and unlock the front and rear differential independently to get the maximum performance on the track - all controlled remotly from your tranmitter and 2x 0,9kg mini servos. Leave the differential unlocked for a smooth handling at high speed. On tecnical trails you can lock the front differential, the rear differential or even both to handle extreme terrain.Aluminum motor mount and an adjustable slipper clutch provide a additional protection in extreme conditions.Hardened steel differential gears and drive partsElectronics3x waterproof 17g mini servos for gear transmission and differential lock/unlockTec Specs:Length: 445mmWidth: 235mm (w/o wheels)Height: 125-200mm (body mount adjustable)Wheelbase: 313mmWeight: 1550gApproach Angle: 60°Departure Angle: 45°Steering Angle: 45.8°Shock Length: 90mmShock Oil Viscosity: 500CPSTransmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), Remote shiftableGear Pitch: Module 0.8/32dp - Pinion 16T / Spur Gear 44TDrive System: 4WD Shaft DriveMini Servos: 0,9kg waterproof (included) 12014-Orange

With custom builders making up a large percentage of the RC crawler community, Absima wanted to offer something this community could really get excited about. We are now offering the CR3.4 in a pre-assembled chassis kit version, for those who want to run this great chassis with their own choice of electronics, wheels and body. The Absima CR3.4 already includes so many features custom builders look for, and is ready to be transformed into a high performance, unique, custom car.Please note that this rolling chassis comes WITHOUT body, wheels and electronic components!Chassis & SuspensionA realistic designed 5mm CNC machined aluminum frame with a heavy duty aluminum 4-link suspension systemOil shock absorbers with internal springs, 5mm piston rods and shock boots provide a silky smooth and realistic responseHeight-adjustable body posts to perfectly match the body height to thre chassisPortal AxlesPortal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. With conventional crawlers, the torque applies so much force that the vehicle jumps over the obstacle. The design of the portal axles reduces the gear ratio at the wheels and virtually eliminates the torque surges of the drive. The overall reduction ratio of the axle drive is more than twice that of non-portal designs to insure a smooth run.Steering SystemA unique hydraulic steering shock absorber designHardened steel drive shafts and a steering angle of 45.8° offer the best possibilities to handle any terrainDrive SystemThe CR3.4 chassis features a 2-speed transmission to conquer tough terrain and bring you also fast to the next obstacle. Just push a button on the radio and change from transmission ratio 1/37.1 (low speed) to 1/15.1 (high speed)Lock and unlock the front and rear differential independently to get the maximum performance on the track - all controlled remotly from your tranmitter and 2x 0,9kg mini servos. Leave the differential unlocked for a smooth handling at high speed. On tecnical trails you can lock the front differential, the rear differential or even both to handle extreme terrain.Aluminum motor mount and an adjustable slipper clutch provide a additional protection in extreme conditions.Hardened steel differential gears and drive partsElectronics3x waterproof 17g mini servos for gear transmission and differential lock/unlockTec Specs:Length: 445mmWidth: 235mm (w/o wheels)Height: 125-200mm (body mount adjustable)Wheelbase: 313mmWeight: 1550gApproach Angle: 60°Departure Angle: 45°Steering Angle: 45.8°Shock Length: 90mmShock Oil Viscosity: 500CPSTransmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), Remote shiftableGear Pitch: Module 0.8/32dp - Pinion 16T / Spur Gear 44TDrive System: 4WD Shaft DriveMini Servos: 0,9kg waterproof (included) 12014

Top Features : Waterproof and dustproof "all-weather" Brushed regulator -small housing dimensions -Automatic range calibration between throttle and brake -Double-Click Forward / Reverse Function with Motor Brake -Battery "Low Power Auto - Cut Off" -Fail Save Function Technical data : -Applications Buggy / Truggy / Truck / Touring Car Forward load capacity : Continuous load 40A / Short-time load 180A -Reverse load capacity : Continuous load 20A / Short time load 90A -Operation with 5 - 9 cells NiMH rechargeable battery / 2 - 3 cells LiPo rechargeable battery -Battery "Low Power Auto - Cut Off" ( NiMH 5 - 9 cells at 4.5 V / LiPo 2 cells 6.5 V / LiPo 3 cells 9.75 V ) -Motor Limit : when operating with 2 cells LiPo or 5 - 6 cells NiMH battery = motors of size 540 or 550 with = 12T or < 30.000 rpm per V -Motor Limit : when operating with 3 cells LiPo or 7 - 9 cells NiMH battery = size 540 or 550 motors with = 18T or < 20.000 rpm per V -overheating protection at 100° C -Resistance Forward 0.002 Ohm / Reverse 0.004 Ohm -BEC 6 V / 2 A (Linear mod BEC) -Power transmission during reverse driving 50 -Connector system : Tamiya -Dimensions : (L/W/H) 46.5 x 34.0 x 28.5 mm -Weight 70 g -Plug & Drive System -on/off switch 2100004

Top features : - Waterproof and dustproof "all-weather" Crawler Brushed Regulator - Small housing dimensions - Automatic range calibration between throttle and brake - Single-Click Forward / Reverse Function with Immediately Responding Motor Brake - Low Power Auto - Cut Off" battery- Fail Save Function Technical data : - Application areas crawler and boat - Load capacity forward : continuous load 40A / short time load 180A - Load capacity reverse : continuous load 20A / short-time load 90A - Operation with 5 - 9 cells NiMH battery / 2 - 3 cells LiPo battery - Battery "Low Power Auto - Cut Off" ( NiMH 5 - 9 cells at 4.5 V / LiPo 2 cells 6.5 V / LiPo 3 cells 9.75 V ) - Motor Limit : when operating with 2 cells LiPo or 5 - 6 cells NiMH battery = motors of size 540 or 550 with = 12T or < 30.000 rpm per V -Motor Limit : when operating with 3 cells LiPo or 7 - 9 cells NiMH battery = size 540 or 550 motors with = 18T or < 20.000 rpm per V - Overheating protection at 100° C - Resistance Forward 0.002 Ohm / Reverse 0.004 Ohm - BEC 6 V / 2 A (Linear mod BEC) - Power transmission when reversing in crawler mode 100 % / boat mode 25 % - Connector system : Tamiya - Dimensions : (L/W/H) 46.5 x 34.0 x 28.5 mm - Weight 70 g - Plug & Drive System - on/off switch 2100003

Our 1:18 PRO crawler version can do more than some of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gears made of tool steel, 1.2" tires and a modified drive ratio for even more torque it becomes a real crawler fun machine. You do not need much space and the "Playground" is built quickly. For example, simply throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.HIGHLIGHTS:Portal axles front & rearMetal gears on front and rear axles2.4GHz transmitter/receiver unitFully functional lighting system operated by transmitterOversize 1.2" AT tires with internal bead lock systemChassis mounted 1kg steering servo with panhard barPPX4 water resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cmDriving time of up to 45 minutesSteering angle of up to 4 5Ultimate ground clearance due to portal axles and 1.2" wheels Unique "Adventure Van" body design with many add-on parts and clever mounting system (body splines on underside) for maximum scale design.Fully functional lighting front and rear consisting of low beam, high beam, tail light, flashing light and hazard warning lights. Operation takes place through the 3rd channel on the transmitter.Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles are made of tool steel. CVD drive shafts are installed on the front axle.New super soft 1.2" "All Terrain" wheels with internal bead lock design. Simple, well-balanced and easily accessible chassis layout with high-performance drivetrain. FEATURES:Scale: 1:184WD (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:155T / 030 Brushed MotorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversFully functional LED lightingScale body with lots of attachmentsBead lock rims with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutes 18028

UNBELIEVABLE POWER - the new Hotshot 3.4BL series is equipped with a powerful brushless electric motor and waterproof electronic speed controller (ESC). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio System8 pcs. Full Aluminum ShocksSteel Motor TransmissionGeneral Chassis Features: 4WDComplete ball bearing 8 pcs. adjustable aluminum oil shocksGear differential front/rearAluminum motor mountComplete covered transmissionNew chassis layout for better performanceAdjustable turnbucklesAdjustable wishbonesAero disc racing wheelsFull printed bodySticker sheet for a unique designA lot tune-up parts available!Technical data: Dimensions ( L/W/H ) : 425 x 300 x 200 mm Weight : 2000 g Wheelbase : 270 mm Ground clearance : 55 mm Track width : 250 mm front / 250 mm rear Tires : Offroad Plow / 10 Spokes Turbine Wheel rim front tyre : width 57 mm / Ø ± 116 mm rear tyre : width 57 mm / Ø ± 116 mm Damper oil Viscosity : 400 CPS Damper springs Strength : Medium Damper installation length : 95 mm front / rear Differential oil Viscosity : 1.000 CPS / 3.000 CPS Brushless version motor ratio : Motor pinion 21 Z ( module 0.6 ) / Spur gear 64 Z MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3300KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming 12244

Our 1:18 PRO crawler version can do more than some of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gears made of tool steel, 1.2" tires and a modified drive ratio for even more torque it becomes a real crawler fun machine. You do not need much space and the "Playground" is built quickly. For example, simply throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.HIGHLIGHTS:Portal axles front & rearMetal gears on front and rear axles2.4GHz transmitter/receiver unitFully functional lighting system operated by transmitterOversize 1.2" AT tires with internal bead lock systemChassis mounted 1kg steering servo with panhard barPPX4 water resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cmDriving time of up to 45 minutesSteering angle of up to 4 5Ultimate ground clearance due to portal axles and 1.2" wheels Unique "Adventure Van" body design with many add-on parts and clever mounting system (body splines on underside) for maximum scale design.Fully functional lighting front and rear consisting of low beam, high beam, tail light, flashing light and hazard warning lights. Operation takes place through the 3rd channel on the transmitter.Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles are made of tool steel. CVD drive shafts are installed on the front axle.New super soft 1.2" "All Terrain" wheels with internal bead lock design. Simple, well-balanced and easily accessible chassis layout with high-performance drivetrain. FEATURES:Scale: 1:184WD (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:155T / 030 Brushed MotorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversFully functional LED lightingScale body with lots of attachmentsBead lock rims with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutes 18029

Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version including plug charger and battery). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS40A Brushed Waterproof Speed ControllerPowerfull 15T Motor with 32.000RPM2.4GHz Radio SystemPRODUCT FEATURESWaterproof 40A brushed ESCSelect between NiMH and LiPo batteryBall bearing transmissionOil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesMotor heat sinkAero disc racing wheelsFull printed body2.4GHz radio System Sticker sheet for a unique designPerformance hop ups available!TECH SPECSMotor Type: 15T 540 Brushed MotorTransmission: Forward, Brake & ReverseDrive System: 4 Wheel DriveWheelbase: 270mmGround Clearance: 35mmMeasure (L/W/H): 380x255x155 mmWeight: 1410gTire width: 33 mm front / 42 mm rearTire Ø ± 88 mmShock spring force: medium / Length: 85mm f/rDifferential oil viscosity: 3.000 front /1.000 rearShock oil viscosity: 400 f/rMotor transmission: Pinion 23T / Gear 64TPinion module: 0.6MORE FEATURES:Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: TamiyaServo (2030003): 4kg steering force / 25T outdriveMotor (1230360): 15T / 32.000RPM / 16A / Size: 540Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming 12222

With custom builders making up a large percentage of the RC crawler community, Absima wanted to offer something this community could really get excited about. We are now offering the CR3.4 in a pre-assembled chassis kit version, for those who want to run this great chassis with their own choice of electronics, wheels and body. The Absima CR3.4 already includes so many features custom builders look for, and is ready to be transformed into a high performance, unique, custom car.Please note that this rolling chassis comes WITHOUT body, wheels and electronic components!Chassis & SuspensionA realistic designed 5mm CNC machined aluminum frame with a heavy duty aluminum 4-link suspension systemOil shock absorbers with internal springs, 5mm piston rods and shock boots provide a silky smooth and realistic responseHeight-adjustable body posts to perfectly match the body height to thre chassisPortal AxlesPortal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. With conventional crawlers, the torque applies so much force that the vehicle jumps over the obstacle. The design of the portal axles reduces the gear ratio at the wheels and virtually eliminates the torque surges of the drive. The overall reduction ratio of the axle drive is more than twice that of non-portal designs to insure a smooth run.Steering SystemA unique hydraulic steering shock absorber designHardened steel drive shafts and a steering angle of 45.8° offer the best possibilities to handle any terrainDrive SystemThe CR3.4 chassis features a 2-speed transmission to conquer tough terrain and bring you also fast to the next obstacle. Just push a button on the radio and change from transmission ratio 1/37.1 (low speed) to 1/15.1 (high speed)Lock and unlock the front and rear differential independently to get the maximum performance on the track - all controlled remotly from your tranmitter and 2x 0,9kg mini servos. Leave the differential unlocked for a smooth handling at high speed. On tecnical trails you can lock the front differential, the rear differential or even both to handle extreme terrain.Aluminum motor mount and an adjustable slipper clutch provide a additional protection in extreme conditions.Hardened steel differential gears and drive partsElectronics3x waterproof 17g mini servos for gear transmission and differential lock/unlockTec Specs:Length: 445mmWidth: 235mm (w/o wheels)Height: 125-200mm (body mount adjustable)Wheelbase: 313mmWeight: 1550gApproach Angle: 60°Departure Angle: 45°Steering Angle: 45.8°Shock Length: 90mmShock Oil Viscosity: 500CPSTransmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), Remote shiftableGear Pitch: Module 0.8/32dp - Pinion 16T / Spur Gear 44TDrive System: 4WD Shaft DriveMini Servos: 0,9kg waterproof (included) 12014-Blau

"The Hot-Blooded-Shot" is probably the best description for action-packed racing with the new Absima RC Car generation. The Edition 3 comes up with some technical refinements next to racy and newly designed bodies. For example, the chassis was completely designed in the race layout and is now much lighter, for even longer driving pleasure. The smooth-running transmission and fibre-reinforced plastic parts round off the quality image. Highlights AT3.4 Brushless Version:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio SystemFull Aluminum ShocksSteel Motor TransmissionGENERAL CHASSIS FEATURES:4WDComplete ball bearing Adjustable aluminum oil shocksGear differential front/rearAluminum motor mountComplete covered transmissionNew chassis layout for better performanceAdjustable turnbucklesAdjustable wishbonesAero disc racing wheelsFull printed bodySticker sheet for a unique designA lot tune-up parts available!Technical data: Dimensions ( L/W/H ) : 405 x 325 x 165 mm Weight : 1650 g Wheelbase : 270 mm Ground clearance : 40 mm Track width : 270 mm front / 270 mm rear Tires : Offroad Blockpin / Slot Disc Rim front tyre : width 55 mm / Ø ± 105 mm rear tyre : width 55 mm / Ø ± 105 mm Damper oil Viscosity : 400 CPS Damper springs Strength : Medium Damper installation length : 85 mm front / rear Differential oil Viscosity : 1.000 CPS / 3.000 CPS Brushless version motor ratio : Motor pinion 23 Z ( module 0.6 ) / Spur gear 64 Z MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3300KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming 12243

The ABSIMA 1/24 Scale RTR Mini Crawler brings unmatched performance to the Micro Scale world with a host of details including a chassis mounted servo, waterproof electronics, lithium battery and a 2.4GHz remote control.The vehicle features a unique transmission designed to produce incredible torque at low speeds to deliver a controlled crawling experienceDespite its compact size, this is a rugged off-road vehicle with features normally only found on much larger vehicles. A multilink chassis, fully locked differentials, telescopic driveshafts, a 3-stage high-performance transmission and, of course, 4WD all-wheel drive ensure top performance.The wheels have an internal beadlock design with tires made of a super-soft rubber compound for excellent grip. Spring shocks allow for ultra-articulated performance, while the anodized aluminum chassis frame maintains chassis rigidity. Add to this a "Drag/Mountain Brake" to easily stop even on the steepest slopes.The waterproof (PPX4) 2-in-1 speed controller/receiver unit is powered by a 360mAh LiPo battery that provides up to 45 minutes of runtime on a single charge. The battery is charged by a special USB charging cable. The charging time is about 30 minutes.But this little one offers more than just power. This mini crawler offers a great scale appearance while being an ideal base to make personalized adjustments. Whether you want to crawl indoors, outdoors, or just want to own a scale micro-size RC car, this vehicle offers it all on a powerful, affordable, and upgradeable platform with the power needed to tackle the track. There are several tuning parts available for customization - for example, HD steel driveshafts with chrome finish which are very heavy and sturdy for better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas.FEATURES:Scale 1:244WD (all-wheel drive)2.4GHz remote control system (digital, proportional)Aluminum anodized ladder frame chassis"High Torque" gearbox, reduction 104:188T / 030 brushed motor2-in-1 speed controller/receiver unitChassis-mounted servo (waterproof)Fully locked differentials (front & rear)Telescopic UJ driveshaftsDetailed Lexan body with add-on parts and spare wheelLED lighting (front & rear)• Independent suspension with shock absorbersTires made of super soft rubber compound with aggressive tread patternWheels with internal beadlock designWaterproof electronicsDriving time: approx. 45 minutesTECHNICHAL DATA:Speed controller 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 360mAhBattery connector system: Molex 2-pinCharger: USB fast charger (7.4V; 1000mAh)Wheelbase: 121mmGround clearance: 25mmTrack width v/h: 100mmLength: 215mmHeight: 120mmWidth: 104mmWeight: approx. 250gWheels: 18x45mm 10022

The ABSIMA 1/24 Scale RTR Mini Crawler brings unmatched performance to the Micro Scale world with a host of details including a chassis mounted servo, waterproof electronics, lithium battery and a 2.4GHz remote control.The vehicle features a unique transmission designed to produce incredible torque at low speeds to deliver a controlled crawling experienceDespite its compact size, this is a rugged off-road vehicle with features normally only found on much larger vehicles. A multilink chassis, fully locked differentials, telescopic driveshafts, a 3-stage high-performance transmission and, of course, 4WD all-wheel drive ensure top performance.The wheels have an internal beadlock design with tires made of a super-soft rubber compound for excellent grip. Spring shocks allow for ultra-articulated performance, while the anodized aluminum chassis frame maintains chassis rigidity. Add to this a "Drag/Mountain Brake" to easily stop even on the steepest slopes.The waterproof (PPX4) 2-in-1 speed controller/receiver unit is powered by a 360mAh LiPo battery that provides up to 45 minutes of runtime on a single charge. The battery is charged by a special USB charging cable. The charging time is about 30 minutes.But this little one offers more than just power. This mini crawler offers a great scale appearance while being an ideal base to make personalized adjustments. Whether you want to crawl indoors, outdoors, or just want to own a scale micro-size RC car, this vehicle offers it all on a powerful, affordable, and upgradeable platform with the power needed to tackle the track. There are several tuning parts available for customization - for example, HD steel driveshafts with chrome finish which are very heavy and sturdy for better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas.FEATURES:Scale 1:244WD (all-wheel drive)2.4GHz remote control system (digital, proportional)Aluminum anodized ladder frame chassis"High Torque" gearbox, reduction 104:188T / 030 brushed motor2-in-1 speed controller/receiver unitChassis-mounted servo (waterproof)Fully locked differentials (front & rear)Telescopic UJ driveshaftsDetailed Lexan body with add-on parts and spare wheelLED lighting (front & rear)• Independent suspension with shock absorbersTires made of super soft rubber compound with aggressive tread patternWheels with internal beadlock designWaterproof electronicsDriving time: approx. 45 minutesTECHNICHAL DATA:Speed controller 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 360mAhBattery connector system: Molex 2-pinCharger: USB fast charger (7.4V; 1000mAh)Wheelbase: 121mmGround clearance: 25mmTrack width v/h: 100mmLength: 215mmHeight: 120mmWidth: 104mmWeight: approx. 250gWheels: 18x45mm 10023

he CR3.4 LANDI Scale Crawler is a high-end car loaded with technical features which are unusual for a "ready-to-run" vehicle!This limited edition comes in a fancy "ABS hard plastic body" with lots of moving parts like doors and engine hood.In addition, attractive details such as light bowls, radiator grille, wipers, door handles and clear windows so that you can examine the wonderful interior.A realistically designed 5mm CNC machined aluminum frame with a heavy-duty aluminum 4-link suspension system.Our new oil-filled shocks with 3mm piston rods and outboard springs provide even a better and more realistic response. Tuning springs are also available in soft and hard (sold separately). Portal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle "jumps" over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure a smooth running.A unique hydraulic steering shock absorber design combined with a 15kg digital and waterproof steering servo, hardened steel drive shafts and a 45.8° steering angle provide the best options for any terrain.The CR3.4 chassis has a 2-speed transmission that allows you to overcome difficult terrain and also quickly get to the next obstacle. Simply press a button on the remote control and change from gear ratio 1/37.1 (Low Speed) to 1/15.1 (High Speed)Lock and unlock the front and rear differentials independently for maximum performance on the track, all remotely controlled with your remote and 2 built-in mini servos. Leave the differential unlocked for smooth hadling at high speeds. On technically challenging trails, you can lock the front differential, the rear differential, or even both to tackle extreme terrain. An aluminum motor mount and adjustable slip clutch provide added protection in extreme conditions.Hardened steel differential gears and drive parts - designed for high loads.The drive concept - powered by HOBBYWING - includes a 60A waterproof speed controller and a 600 motor with monster torque. Set the "jumpers to the right position to set your battery type (NiMH / LiPo) and driving mode (forward / reverse / brake).A 15kg digital steering servo with metal gears and 3x 17g mini servos with 0.9kg actuating force for gear ratio and differential lock/unlock are already installed. All servos are waterproof.The 6-channel 2.4 GHz radio system gives you total control over your vehicle - whether lights, 2-speed transmission, differential locks or setting the top speed.As standard, the ABSIMA Landi comes with switchable headlights and taillights.If you want to expand the lighting, no problem! All light shells are already mounted, so that nothing stands in the way of a separately available light unit.Stylish 1.9-inch beadlock wheels with aluminum rings and 10-bolt design and super soft tires with realistic sidewall flex for maximum traction on any rockWheel size: 43x120 mm Rocksliders and molded inner fenders protect the chassis from dirt and damage.The body is attached to the chassis with 4 wing nuts.A bracket for a spare wheel is already mounted at the rear.CAR SPECS:Length: 542mmWidth: 250mmHeight: 240mmGround Clearance: 53mmWheelbase: 313mmWeight: 2970gApproach Angle: 60°Departure Angle: 45°Steering Angle: 45.8°Wheels: 12mm Hex Beadlock 1.9" 32x69mm Tires: 43x120mmShock Length: 90mmShock Oil Viscosity: 500cpsTransmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote shifting Gear Pitch: Module 0.8/32dp - Pinion 16Z / Spur Gear 44TDrive System: 4WD ELECTRONIC SPECS:ESC: 60A Brushed/Waterproof with T-Plug (BEC 6V@3A, NiMh/LiPo suitable)Motor: 600 high-torque brushed motor 21TSteering Servo: 15kg MG, digital and waterproof Mini Servos: 0,9kg, waterproofRadio System: 6-channel 2.4GHz radio system (4.8 - 12.0V LiPo suitable) 12017

he CR3.4 LANDI Scale Crawler is a high-end car loaded with technical features which are unusual for a "ready-to-run" vehicle!This limited edition comes in a fancy "ABS hard plastic body" with lots of moving parts like doors and engine hood.In addition, attractive details such as light bowls, radiator grille, wipers, door handles and clear windows so that you can examine the wonderful interior.A realistically designed 5mm CNC machined aluminum frame with a heavy-duty aluminum 4-link suspension system.Our new oil-filled shocks with 3mm piston rods and outboard springs provide even a better and more realistic response. Tuning springs are also available in soft and hard (sold separately). Portal axles not only offer a greater distance from the differential housing to the ground than conventional axles, they also have another positive feature. In conventional crawlers, torque applies so much force that the vehicle "jumps" over the obstacle. The design of portal axles reduces the gear ratio at the wheels and virtually eliminates torque shocks from the drive. The overall reduction ratio of the axle drive is more than double that of non-portal designs to ensure a smooth running.A unique hydraulic steering shock absorber design combined with a 15kg digital and waterproof steering servo, hardened steel drive shafts and a 45.8° steering angle provide the best options for any terrain.The CR3.4 chassis has a 2-speed transmission that allows you to overcome difficult terrain and also quickly get to the next obstacle. Simply press a button on the remote control and change from gear ratio 1/37.1 (Low Speed) to 1/15.1 (High Speed)Lock and unlock the front and rear differentials independently for maximum performance on the track, all remotely controlled with your remote and 2 built-in mini servos. Leave the differential unlocked for smooth hadling at high speeds. On technically challenging trails, you can lock the front differential, the rear differential, or even both to tackle extreme terrain. An aluminum motor mount and adjustable slip clutch provide added protection in extreme conditions.Hardened steel differential gears and drive parts - designed for high loads.The drive concept - powered by HOBBYWING - includes a 60A waterproof speed controller and a 600 motor with monster torque. Set the "jumpers to the right position to set your battery type (NiMH / LiPo) and driving mode (forward / reverse / brake).A 15kg digital steering servo with metal gears and 3x 17g mini servos with 0.9kg actuating force for gear ratio and differential lock/unlock are already installed. All servos are waterproof.The 6-channel 2.4 GHz radio system gives you total control over your vehicle - whether lights, 2-speed transmission, differential locks or setting the top speed.As standard, the ABSIMA Landi comes with switchable headlights and taillights.If you want to expand the lighting, no problem! All light shells are already mounted, so that nothing stands in the way of a separately available light unit.Stylish 1.9-inch beadlock wheels with aluminum rings and 10-bolt design and super soft tires with realistic sidewall flex for maximum traction on any rockWheel size: 43x120 mm Rocksliders and molded inner fenders protect the chassis from dirt and damage.The body is attached to the chassis with 4 wing nuts.A bracket for a spare wheel is already mounted at the rear.CAR SPECS:Length: 542mmWidth: 250mmHeight: 240mmGround Clearance: 53mmWheelbase: 313mmWeight: 2970gApproach Angle: 60°Departure Angle: 45°Steering Angle: 45.8°Wheels: 12mm Hex Beadlock 1.9" 32x69mm Tires: 43x120mmShock Length: 90mmShock Oil Viscosity: 500cpsTransmission: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote shifting Gear Pitch: Module 0.8/32dp - Pinion 16Z / Spur Gear 44TDrive System: 4WD ELECTRONIC SPECS:ESC: 60A Brushed/Waterproof with T-Plug (BEC 6V@3A, NiMh/LiPo suitable)Motor: 600 high-torque brushed motor 21TSteering Servo: 15kg MG, digital and waterproof Mini Servos: 0,9kg, waterproofRadio System: 6-channel 2.4GHz radio system (4.8 - 12.0V LiPo suitable) 12018

Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired! The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience. Short and sweet: This little powerhouse lies on the road like a board !HIGHLIGHTS:Aluminum chassis for excellent handling characteristicsPowered by a powerful 380 brushless motorHigh performance differentials on front and rear axleIndependent suspension for exceptional handlingIntricately designed, multi-piece bodyshellSpeed: +/- 40 km/hDESIGN:The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.CHASSIS PERFORMANCE:Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!Basically, the structure and arrangement of the components is like a 1:10 competition touring car:Independent suspensionCVD front driveshaftsDifferentials with aluminum pinion gears (38Z) and pinion gears (14Z)Differential gears made of polyamide (12Z/24Z)Aluminum drive bones on rear axleAluminum "big-bore" shock absorbersChassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).DRIVE UNIT:a plenty of power for that scale!Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger includedREMOTE CONTROL & STEERING:A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface!FEATURES:4WD All Wheel Drive2.4GHz remote controlFull ball bearing driveAluminum chassis, upper deck and shock towersAluminum "big bore" shock absorbersCVD axles on front axleHeavy duty front & rear differentialsAluminum propshaftLED lighting front & rearExtremely detailed body with sticker sheet SPECIFICATION:Scale: 1:16Dimensions: (L/W/H): 310x140x80mm)Weight (without battery): 560grWheelbase: 175mmGround clearance: approx. 6mmTrack width: 110mm front / 115mm rearWheels front/rear: Ø 50mm / Width: 18mmDamper filled: Yes (100CPS)Damper installation length: 38mmMotor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!) 16010

Rock racers and desert buggies are all the rage at the moment! One reason for this is that these vehicles can be driven not only on the road. Especially in rough terrain, these vehicles offer a driving experience that is second to none.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!40A HOBBYWING speed controller with Tamiya plug and 21T brushed motor (NiMH and LiPo compatible)Oil pressure shock absorber with adjustable preloadLED light bar front and rearSPEED: +/- 35 km/hDrive:The 40A HOBBYWING Brushed speed controller is waterproof and pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). It is driven by a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent four-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminium drive shaft. Suspension:16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimise the handling and adapt it perfectly to the conditions. Adjustable shock towers made from 4mm 6061-T6 aluminium, anti-roll bars on the front and rear axles and independent independent suspension provide amazing handling and feel.Bodywork and lighting:The bodywork with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure compensation tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 cuts a fine figure thanks to marker lights and an LED light strip at the front (white) and another light strip at the rear (red/orange). Finally, there is a full-size spare wheel at the rear of the vehicle.4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable chassisBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminium motor mount5mm aluminium shock towersAluminium propshaft2 cone differentials (front/rear)LED lighting front and rearExtremely detailed body with add-on partsVehicle can be operated with 2-cell LiPo batteries (up to 30C) Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTyres front/rear Ø: 110mm / width: 45mmDamper oil: 400CPSDamper installation length: 80mmEngine ratio Brushed version: Pinion: 21Z / Main gear: 77Z (48dp) 12226

Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18023

Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18020

Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired! The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience. Short and sweet: This little powerhouse lies on the road like a board !HIGHLIGHTS:Aluminum chassis for excellent handling characteristicsPowered by a powerful 380 brushless motorHigh performance differentials on front and rear axleIndependent suspension for exceptional handlingIntricately designed, multi-piece bodyshellSpeed: +/- 40 km/hDESIGN:The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.CHASSIS PERFORMANCE:Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!Basically, the structure and arrangement of the components is like a 1:10 competition touring car:Independent suspensionCVD front driveshaftsDifferentials with aluminum pinion gears (38Z) and pinion gears (14Z)Differential gears made of polyamide (12Z/24Z)Aluminum drive bones on rear axleAluminum "big-bore" shock absorbersChassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).DRIVE UNIT:a plenty of power for that scale!Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger includedREMOTE CONTROL & STEERING:A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface!FEATURES:4WD All Wheel Drive2.4GHz remote controlFull ball bearing driveAluminum chassis, upper deck and shock towersAluminum "big bore" shock absorbersCVD axles on front axleHeavy duty front & rear differentialsAluminum propshaftLED lighting front & rearExtremely detailed body with sticker sheet SPECIFICATION:Scale: 1:16Dimensions: (L/W/H): 310x140x80mm)Weight (without battery): 560grWheelbase: 175mmGround clearance: approx. 6mmTrack width: 110mm front / 115mm rearWheels front/rear: Ø 50mm / Width: 18mmDamper filled: Yes (100CPS)Damper installation length: 38mmMotor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!) 16011

Rock racers and dessert buggies are on everyone's lips at the moment! On the one hand, this is due to the fact that the vehicles can be moved not only on the road. Especially in rough terrain, these vehicles offer a driving image that is unparalleled.The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!Highlights:40A HOBBYWING speed controller with Tamiya connector and 21T brushed motor (NiMH and LiPo compatible)Oil pressure shock absorber with adjustable preloadLED light bar front and rearSPEED: +/- 35 km/hDrive:The 40A HOBBYWING brushed speed controller is waterproof and comes pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). Powered by this is a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminum driveshaft.Suspension:16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and ride.Body and Lighting:The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.The hinged cage provides quick access to the battery. And even in the dark, the ADB1.4 cuts a fine figure thanks to marker lights and an LED light bar at the front (white) and another light bar at the rear (red/orange).Finally, there is a full-size spare wheel at the rear of the vehicle.Features:4WD all-wheel drive2.4GHz remote controlExtremely durable composite plastic partsFully adjustable suspensionBall bearing driveAdjustable 16mm Big Bore shocksSteel differential outputs5mm aluminum motor mount5mm aluminum shock towersAluminum driveshaft2 cone differentials (front/rear)LED light bar front and rearExtremely detailed body with add-on partsVehicle can be powered by 2-cell LiPo batteries (up to 30C)Specification:Scale: 1:10Dimensions (L/W/H): 500x270x165 mmWeight: 2060gWheelbase: 290mmGround clearance: approx. 45mmTrack width: 215mm front / 210mm rearTires front/rear Ø: 110mm / Width: 45mmDamper oil: 400CPSDamper installation length: 80mmMotor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp) 12225

Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version only). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS40A Brushed Waterproof Speed ControllerPowerfull 18T 550 Motor2.4GHz Radio SystemPRODUCT FEATURESWaterproof 40A brushed ESCSelect between NiMH and LiPo batteryBall bearing transmission8 pcs. Oil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesMotor heat sinkAero disc racing wheelsFull printed body2.4GHz radio System Sticker sheet for a unique designPerformance hop ups available! 12224

Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18022

The ABSIMA 1/24 Scale RTR Mini Crawler brings unmatched performance to the Micro Scale world with a host of details including a chassis mounted servo, waterproof electronics, lithium battery and a 2.4GHz remote control.The vehicle features a unique transmission designed to produce incredible torque at low speeds to deliver a controlled crawling experienceDespite its compact size, this is a rugged off-road vehicle with features normally only found on much larger vehicles. A multilink chassis, fully locked differentials, telescopic driveshafts, a 3-stage high-performance transmission and, of course, 4WD all-wheel drive ensure top performance.The wheels have an internal beadlock design with tires made of a super-soft rubber compound for excellent grip. Spring shocks allow for ultra-articulated performance, while the anodized aluminum chassis frame maintains chassis rigidity. Add to this a "Drag/Mountain Brake" to easily stop even on the steepest slopes.The waterproof (PPX4) 2-in-1 speed controller/receiver unit is powered by a 360mAh LiPo battery that provides up to 45 minutes of runtime on a single charge. The battery is charged by a special USB charging cable. The charging time is about 30 minutes.But this little one offers more than just power. This mini crawler offers a great scale appearance while being an ideal base to make personalized adjustments. Whether you want to crawl indoors, outdoors, or just want to own a scale micro-size RC car, this vehicle offers it all on a powerful, affordable, and upgradeable platform with the power needed to tackle the track. There are several tuning parts available for customization - for example, HD steel driveshafts with chrome finish which are very heavy and sturdy for better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas.FEATURES:Scale 1:244WD (all-wheel drive)2.4GHz remote control system (digital, proportional)Aluminum anodized ladder frame chassis"High Torque" gearbox, reduction 104:188T / 030 brushed motor2-in-1 speed controller/receiver unitChassis-mounted servo (waterproof)Fully locked differentials (front & rear)Telescopic UJ driveshaftsDetailed Lexan body with add-on parts and spare wheelLED lighting (front & rear)• Independent suspension with shock absorbersTires made of super soft rubber compound with aggressive tread patternWheels with internal beadlock designWaterproof electronicsDriving time: approx. 45 minutesTECHNICHAL DATA:Speed controller 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 360mAhBattery connector system: Molex 2-pinCharger: USB fast charger (7.4V; 1000mAh)Wheelbase: 121mmGround clearance: 25mmTrack width v/h: 100mmLength: 215mmHeight: 120mmWidth: 104mmWeight: approx. 250gWheels: 18x45mm 10020

Size is not always the deciding factor...our mini crawlers prove this in daily use in the living room or home garden. You don't need much space and the "Playground" is quickly built. For example, just throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the small crawler over even the most complicated-looking obstacles.The Scale Lexan bodies of our Mini Crawlers offer many fine details and all are equipped with LED lighting. In addition, there is also a sticker sheet for individual design. The chassis is in no way inferior to the crawler brothers in larger scales. A multilink chassis, fully locked differentials, telescopic drive shafts, a 3-stage high-performance transmission and, of course, all-wheel drive (4WD) ensure top performance. In addition, there is a "Drag / Mountain Brake" to stop simply even on the steepest slope. Various tuning parts are available for individual design - for example, drive shafts made of HD steel with chrome finish which are very heavy and robust and thus provide better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas. The vehicle is powered by a waterproof (PPX4) 2-in-1 speed controller/receiver unit and a 7.4V LiPo battery with 600mAh which provides a driving time of up to 60 minutes. The battery is charged by a USB charging cable. The charging time is about 45 minutes. FEATURES:High Torque gearbox, reduction ratio 104:188T / 030 Brushed MotorDifferential fully locked (front & rear)Telescopic UJ drive shaftMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversLED lighting (front & rear)Scale body with lots of attachmentsBead lock rims with super soft M/T tiresWaterproof mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 60 minutes Specifications:Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 600mAhBattery connector system: Molex 2-pinWheelbase: 155mmGround clearance: 35mmTrack width: 110mmLength: 260mmWidth: 113mmHeight: 115mmWeight: 300gWheels: 18x57mm 18021

A myth doesn't follow a line, a myth breaks rules. The ATC BL in the 3rd generation has grown into a super sports car. The combination of sportiness, dynamics and efficiency makes the ATC3.4 special and an exceptional performer. With its 3S Ready heart, supported by the fiber-reinforced lightweight chassis, the ATC3.4 delivers track performance with addictive potential. "E-Mobility-Power" made by Absima - because we always can ! Highlights ATC3.4 Brushless Version:+ 60 KM/H fast Waterproof speed controller - 3S Lipo battery ready for use all-wheel drive (4 WD)Equipment: Fully assembled and equipped All-wheel drive Incl. 2.4 GHz remote control Waterproof Brushless Regulator with T-Plug Battery Plug Water-resistant and powerful steering servo with 4 kg actuating force 3300 KV Brushless motor size 540 Fully encapsulated main drive - prevents penetration of small stones or other foreign bodies Aluminium cardan drive with steel holders The vehicle is completely ball bearing mounted and therefore very smooth-running and durable. Two built-in cone differentials transmit torque optimally and compensate for speed differences, e.g. when cornering Differential steel outputs 12mm aluminium oil pressure shock absorber adjustable via knurled screw Aluminium Motor bracket steel shafts on the front axle Track rods adjustable via right/left-hand thread Chassis stiffeners made of aluminium 7mm Damper bridges V/H Extremely robust body ready designed The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to withstand many an "accident" without damage. metal - spur gear and motor pinion Technical data: Dimensions ( L/W/H) 450 x 190 x 125 mm Weight 1425 g Wheelbase 260 mm Ground clearance 20 mm track front 170 mm track rear 170 mm Tyres : Ø ± 65 mm / width 27 mm front - 27 mm rear Chassis ATC Viscosity damper oil : 300 v/h spring strength damper : medium Damper length : front 62 mm / rear 62 mm Viscosity Differential oil : front 5.000 / rear 5.000 Internal gear ratio : bevel pinion 13T / ring gear 38T engine ratio : spur gear 64T / motor pinion 29T ( module 0.6 ) Technical data speed controller Thrust: Waterproof 50A controller incl. fan 3S LiPo ready for use T-Plug battery plug Motor connection via 3.5mm gold contact plugs and sockets Immediately ready to drive Easy calibration Sensorless NiMH 4 - 9 cells & LiPo 2 - 3 cells Operation 95° overheating protection Short-term load 300A BEC 6V / 3A Operating voltage 4.8 - 11.1V Motor timing 18.75 deg. Motor limit @2S LiPo / 6 cells NiMH = Onroad < 8T / Offroad < 11T and motor limit @3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T The following functions can be programmed directly via the integrated Set Up button:+ Brake power 25% - 100% + Neutral brake 0% - 40% + Driving mode Forward - Brake - Reverse or Forward - Brake + Start Punch from soft to aggressive + Voltage switch-off from without up to 3.4V ( ex works LiPo switch-off 3.0V/cell ) Dimensions (L/W/H) : 48.5 x 38 x 32 mm Weight incl. cable : 90 gTechnical Data Motor Thrust: 3300 KV 27,400 rpm @ 7.4 volts 4 poles Operating voltage 4.8 - 11.1V Size 540 Housing length : 52.0 mm Housing Ø : 36.0 mm Wavelength : 14.5 mm shaft diameter : 3,17 mm Weight : 200 g Technical Data Servo S40PH: Size - Car Standard Actuating force 4,0 Kg @ 4,8V Actuating time 0.16 Sec / 60° @ 4.8V Gearbox - Nylon gear rim - 25 teeth connector system - JR Dimensions (LxWxHxD) 40.2 mm x 20.4 mm x 39.8 mm hole spacing - 49.7 mm voltage - 4.8 - 6.6V Weight - 43 g 1 Ball bearing Technical data remote control: 2 channel transmitter 3 Channel Mini Receiver reverse function Dual Rate and Trim adjustable Battery compartment for 4 Mignon AA cells ( not included ) 12241

Our 1:18 PRO crawler version can do more than some of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gears made of tool steel, 1.2" tires and a modified drive ratio for even more torque it becomes a real crawler fun machine. You do not need much space and the "Playground" is built quickly. For example, simply throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.HIGHLIGHTS:Portal axles front & rearMetal gears on front and rear axles2.4GHz transmitter/receiver unitFully functional lighting system operated by transmitterOversize 1.2" AT tires with internal bead lock systemChassis mounted 1kg steering servo with panhard barPPX4 water resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cmDriving time of up to 45 minutesSteering angle of up to 4 5Ultimate ground clearance due to portal axles and 1.2" wheels Unique "Adventure Van" body design with many add-on parts and clever mounting system (body splines on underside) for maximum scale design.Fully functional lighting front and rear consisting of low beam, high beam, tail light, flashing light and hazard warning lights. Operation takes place through the 3rd channel on the transmitter.Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles are made of tool steel. CVD drive shafts are installed on the front axle.New super soft 1.2" "All Terrain" wheels with internal bead lock design. Simple, well-balanced and easily accessible chassis layout with high-performance drivetrain. FEATURES:Scale: 1:184WD (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:155T / 030 Brushed MotorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversFully functional LED lightingScale body with lots of attachmentsBead lock rims with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutes 18031

The ABSIMA 1/24 Scale RTR Mini Crawler brings unmatched performance to the Micro Scale world with a host of details including a chassis mounted servo, waterproof electronics, lithium battery and a 2.4GHz remote control.The vehicle features a unique transmission designed to produce incredible torque at low speeds to deliver a controlled crawling experienceDespite its compact size, this is a rugged off-road vehicle with features normally only found on much larger vehicles. A multilink chassis, fully locked differentials, telescopic driveshafts, a 3-stage high-performance transmission and, of course, 4WD all-wheel drive ensure top performance.The wheels have an internal beadlock design with tires made of a super-soft rubber compound for excellent grip. Spring shocks allow for ultra-articulated performance, while the anodized aluminum chassis frame maintains chassis rigidity. Add to this a "Drag/Mountain Brake" to easily stop even on the steepest slopes.The waterproof (PPX4) 2-in-1 speed controller/receiver unit is powered by a 360mAh LiPo battery that provides up to 45 minutes of runtime on a single charge. The battery is charged by a special USB charging cable. The charging time is about 30 minutes.But this little one offers more than just power. This mini crawler offers a great scale appearance while being an ideal base to make personalized adjustments. Whether you want to crawl indoors, outdoors, or just want to own a scale micro-size RC car, this vehicle offers it all on a powerful, affordable, and upgradeable platform with the power needed to tackle the track. There are several tuning parts available for customization - for example, HD steel driveshafts with chrome finish which are very heavy and sturdy for better traction due to their low center of gravity. Also available are aluminum shock absorbers, special weights for the wheels and also unpainted bodies for your own design ideas.FEATURES:Scale 1:244WD (all-wheel drive)2.4GHz remote control system (digital, proportional)Aluminum anodized ladder frame chassis"High Torque" gearbox, reduction 104:188T / 030 brushed motor2-in-1 speed controller/receiver unitChassis-mounted servo (waterproof)Fully locked differentials (front & rear)Telescopic UJ driveshaftsDetailed Lexan body with add-on parts and spare wheelLED lighting (front & rear)• Independent suspension with shock absorbersTires made of super soft rubber compound with aggressive tread patternWheels with internal beadlock designWaterproof electronicsDriving time: approx. 45 minutesTECHNICHAL DATA:Speed controller 2-in-1 ESC/RX unit, PPX4, 10A/50ARemote control: 2.4GHz, 4-channelSteering servo: 1kg actuating force, waterproofMotor: 030 / 88TGear ratio: 104:1Battery: LiPo 7.4V/2S 360mAhBattery connector system: Molex 2-pinCharger: USB fast charger (7.4V; 1000mAh)Wheelbase: 121mmGround clearance: 25mmTrack width v/h: 100mmLength: 215mmHeight: 120mmWidth: 104mmWeight: approx. 250gWheels: 18x45mm 10021

Small car - big power!RTR version with battery, charger and remote controlSpeed +20 km/hFull digital proportional controlElectronic Stability Program (ESP) Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub. Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home! The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun!The removable 3.7V 300mAh LiPo battery is charged by a USB charger. The charging time is about 30-40 minutes and the driving time is about 20 minutes. Additional batteries are available for even more driving fun.FEATURES:2WD rear wheel drive2.4GHz remote controlFully proportional controlMaximum speed can be limited on the remote controlRemovable batterySPECIFICATION:Servo: 3.7g ServoMotor: 8520 Coreless MotorBattery: 3.7V 300mAh LiPo BatterySpeed throttleable: YesESP built in: YesCharging time: approx. 30-40 minutesDriving time: approx. 20 minutesDimensions (L/W/H): 155x95x65 mmWeight: 110 g 10010

"The Hot-Blooded-Shot" is probably the best description for action-packed racing with the new Absima RC Car generation. The Edition 3 comes up with some technical refinements next to racy and newly designed bodies. For example, the chassis was completely designed in the race layout and is now much lighter, for even longer driving pleasure. The smooth-running transmission and fibre-reinforced plastic parts round off the quality image.HIGHLIGHTSKIT Version for self assemblingRacing Body DesignIncluding 2 Versions of Motor Transmissions for Brushed & Brushless (Steel Version)NOTE: KIT Version don`t includes any electronic components!PRODUCT FEATURES Ball bearing transmissionOil filled adjustable shocksGear differential front/rearAluminum motor mountComplete covered transmissionAdjustable turnbuckles & wishbonesMotor heat sinkAero disc racing wheelsFull printed bodySticker sheet for a unique designPerformance hop ups available!TECH SPECSDrive System: 4 Wheel DriveWheelbase: 270mmGround Clearance: 40mmMeasure (L/W/H): 405x325x165 mmWeight: 1375gTire width: 55 mm front / 55 mm rearTire Ø ± 105 mmShock spring force: medium / Length: 85mm f/rDifferential oil viscosity: 3.000 front /1.000 rearShock oil viscosity: 400 f/rMotor transmission: Pinion 23T / Gear 64TPinion module: 0.6 12223KIT

Warning!Vehicle mutates into an untamed beast when operated with 3S (11.1V) Lipo battery!!!!!!!UNBELIEVABLE POWER - the new Hotshot 3.4BL series is equipped with a powerful brushless electric motor and waterproof electronic speed controller (ESC). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.HIGHLIGHTS:Water-resistant 50A BL Speed Controler (programmable)Powerfull 3300KV BL Motor2.4GHz A.F.H.D.S. Radio SystemFull Aluminum ShocksSteel Motor TransmissionGENERAL CHASSIS FEATURES:4WDComplete ball bearing Adjustable aluminum oil shocksGear differential front/rearAluminum motor mountComplete covered transmissionNew chassis layout for better performanceAdjustable turnbucklesAdjustable wishbonesAero disc racing wheelsFull printed bodySticker sheet for a unique designA lot tune-up parts available!TECHNICAL SPECIFICATION:Measure (L/W/H): 380x255x155 mmWeight: 1400gWheelbase: 270 mmChassis clearance: 35 mmTire width: 33 mm front / 42 mm rearTire Ø ± 88 mmShock spring force: medium / Length: 85mm f/rDifferential oil viscosity: 1.000 front / 3.000 rearShock oil viscosity: 400 f/rSteel Motor transmission: Pinion 26T / Gear 64TPinion module: 0.6MORE FEATURES:BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)Servo (2030003): 4kg steering force / 25T outdrive Motor (2130005): 3300KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming 12242

Our 1:18 PRO crawler version can do more than some of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gears made of tool steel, 1.2" tires and a modified drive ratio for even more torque it becomes a real crawler fun machine. You do not need much space and the "Playground" is built quickly. For example, simply throw a few cushions on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.HIGHLIGHTS:Portal axles front & rearMetal gears on front and rear axles2.4GHz transmitter/receiver unitFully functional lighting system operated by transmitterOversize 1.2" AT tires with internal bead lock systemChassis mounted 1kg steering servo with panhard barPPX4 water resistant electronicsMetal chassis framePainted 1.2mm Lexan bodyTight turning circle of 80cmDriving time of up to 45 minutesSteering angle of up to 4 5Ultimate ground clearance due to portal axles and 1.2" wheels Unique "Adventure Van" body design with many add-on parts and clever mounting system (body splines on underside) for maximum scale design.Fully functional lighting front and rear consisting of low beam, high beam, tail light, flashing light and hazard warning lights. Operation takes place through the 3rd channel on the transmitter.Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles are made of tool steel. CVD drive shafts are installed on the front axle.New super soft 1.2" "All Terrain" wheels with internal bead lock design. Simple, well-balanced and easily accessible chassis layout with high-performance drivetrain. FEATURES:Scale: 1:184WD (all-wheel drive)2.4GHz remote control systemHigh Torque gearbox, reduction ratio 104:155T / 030 Brushed MotorDifferentials fully locked (front & rear)Telescopic UJ cardan shaftsMetal chassis frameDrag/Mountain Brake (prevents rolling on hills)Digital Proportional Control for sensitive driving maneuversFully functional LED lightingScale body with lots of attachmentsBead lock rims with super soft AT tiresWaterproof 1kg mini steering servo2-in-1 speed controller/receiver unitDriving time: approx. 45 minutes 18030

Small car - big power!RTR version with battery, charger and remote controlSpeed +20 km/hFull digital proportional controlElectronic Stability Program (ESP) Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub. Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home! The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun!The removable 3.7V 300mAh LiPo battery is charged by a USB charger. The charging time is about 30-40 minutes and the driving time is about 20 minutes. Additional batteries are available for even more driving fun.FEATURES:2WD rear wheel drive2.4GHz remote controlFully proportional controlMaximum speed can be limited on the remote controlRemovable batterySPECIFICATION:Servo: 3.7g ServoMotor: 8520 Coreless MotorBattery: 3.7V 300mAh LiPo BatterySpeed throttleable: YesESP built in: YesCharging time: approx. 30-40 minutesDriving time: approx. 20 minutesDimensions (L/W/H): 155x95x65 mmWeight: 110 g 10011

This remote control system uses the new 2.4 GHz ANT protocol - "enhanced automatic frequency hopping digital system", consisting of a CR7P transmitter and a R7FS receiver.There are 7 channels available. The system is ideally suited for crawlers, on-road cars, off-road cars, drift cars and boats.The large 3,5 x 7,0cm DOT Matrix Display shows all selected parameters clearly. FEATURESDescription of the channels:CH1: Steering wheelCH2: Throttle (Trigger)CH3: SW1 knobCH4: SW2 knobCH5: SW3 3-way switchCH6: VR1 rotary switchCH7: VR2 3-way toggle switch 5-way navigation button5-way trim switchNew "ANT" 2.4GHz protocolVarious MIX functions (program mixer, dual motor mixer, 4-wheel steering mixer)Supports 4* AA batteries or 2S LiPo battery as power supply2-way data transmission20 model memoriesBeginner ModeTimer / lap counterStandard functions like REV / EPA / SUB TR / D/R and CURVE settingsInternal antennaCalibration programLightweight and compact design weighing only 305g (without batteries)Up to 300m range SPECIFICATIONSRemote control CR7P:Frequency: 2.4GHzChannels: 7Model type: cars, boatsRF frequency 2.4GHz; ISM: 2.4G protocol ANTMaximum power:

The little speedster actually manages up to 25km/h and that with a length of only 12cm! So much power at this size must also be able to be controlled. Therefore, the small, handy remote control has 2 gears (low and high speed) and the throttle is proportional to operate. Thus, slow, controlled drives as well as wild burnouts can be mastered. Great fun for the living room! Through the 2.4GHz radio technology, up to 8 vehicles can be operated simultaneously.CHANGES COMPARE TO OUR 1ST GENERATION:Charging ports changed to Micro USB Chassis geometry changed for even better handlingFEATURES:Scale: 1/32Rear wheel driveProportional speed control2-Speed (Low- und High-Speed) switchable through remote control2.4GHz radio technology2 LED front lightsShock resistant materialWheels with rubber treadsFull-suspension chassisAdjustable straight trackingCharging time approx. 20-30 minutes / Driving time approx. 15 MinutesVehicle size L/W/H: 12 x 8,5 x 5,5 cm 10003

The little speedster actually manages up to 25km/h and that with a length of only 12cm! So much power at this size must also be able to be controlled. Therefore, the small, handy remote control has 2 gears (low and high speed) and the throttle is proportional to operate. Thus, slow, controlled drives as well as wild burnouts can be mastered. Great fun for the living room! Through the 2.4GHz radio technology, up to 8 vehicles can be operated simultaneously.CHANGES COMPARE TO OUR 1ST GENERATION:Charging ports changed to Micro USB Chassis geometry changed for even better handlingFEATURES:Scale: 1/32Rear wheel driveProportional speed control2-Speed (Low- und High-Speed) switchable through remote control2.4GHz radio technology2 LED front lightsShock resistant materialWheels with rubber treadsFull-suspension chassisAdjustable straight trackingCharging time approx. 20-30 minutes / Driving time approx. 15 MinutesVehicle size L/W/H: 12 x 8,5 x 5,5 cm 10004