innoflyer HEADLIGHT LARISA 10MM RIBBED OPTICS
Product number:
9743326
Manufacturer number:
IF2005-GO
€29.99*
Not in stock. Available only by special order in approx. 7 to 21 business days.
Description "innoflyer HEADLIGHT LARISA 10MM RIBBED OPTICS"
Square headlamp with ribbed or clear-glass optic. Used, for example, as a landing light, taxi or recognition/WigWag lighting.
variant description
Variant clear-glass optics: The clear-glass optics produce a highly concentrated light emission (spot). Ideal for use as a landing light, for example.
Ribbed optics: The ribbed optics produces an oval beam of light. Suitable e. g. as Taxi Light or Recognition/WigWag lighting.
outlet
The headlamp can be connected directly to an SLC output (Smart Light Channel) of the Light Driver 5.0 lighting control system (see Accessories). No soldering work and no series resistors are necessary.
Intelligent lighting control
Plug & Play type recognition: The headlamp is automatically detected by the Light Driver 5.0 lighting control system. The light control regulates the luminosity and thus the heat generation according to the thermal properties of the headlamp housing.
Max. Light Tracking (MLT): The headlamp can optionally be operated with full light output. An integrated heat sensor enables the Light Driver 5.0 lighting control system to automatically regulate the light output at high heat generation.
compatibility
The headlamp can also be used in conjunction with the Optotronix light control modules. For this purpose, a 2.7 Ohm resistor (2R7) must be soldered into the positive or negative lead (see accessories).
variant description
Variant clear-glass optics: The clear-glass optics produce a highly concentrated light emission (spot). Ideal for use as a landing light, for example.
Ribbed optics: The ribbed optics produces an oval beam of light. Suitable e. g. as Taxi Light or Recognition/WigWag lighting.
outlet
The headlamp can be connected directly to an SLC output (Smart Light Channel) of the Light Driver 5.0 lighting control system (see Accessories). No soldering work and no series resistors are necessary.
Intelligent lighting control
Plug & Play type recognition: The headlamp is automatically detected by the Light Driver 5.0 lighting control system. The light control regulates the luminosity and thus the heat generation according to the thermal properties of the headlamp housing.
Max. Light Tracking (MLT): The headlamp can optionally be operated with full light output. An integrated heat sensor enables the Light Driver 5.0 lighting control system to automatically regulate the light output at high heat generation.
compatibility
The headlamp can also be used in conjunction with the Optotronix light control modules. For this purpose, a 2.7 Ohm resistor (2R7) must be soldered into the positive or negative lead (see accessories).